📄 bspvalidationlog.1444
字号:
BSP Validation Test Suite version 2.0
-------------------------------------
Test parameters :
-----------------
Target server : csb337_t1
BSP : csb337
Log file : p:/C04034/WIND_BASE/target/config/csb337/vtsLogs/bspValidationLog.1444
BSP Validation Test Started : Thu Oct 14 10:44:46 W. Europe Daylight Time 2004
Test started : Thu Oct 14 10:44:47 W. Europe Daylight Time 2004
Bootline Test :
value of
local error address is : 0x00400000
off-board error address is : 0x90000000
local bus error message is : Exception address
off-board bus error message is : Exception address
bootline is : emac 0 host vxWorks 147.11.96.60 {} 147.11.96.138 {} csb csb 0x8 csb337 {} {}
host serial device is : COM1
host default serial baud is : 38400
timeout value for reboot is : 60
serial output for control-X test is :
Press any key to stop auto-boot...
Control X test : PASS
### Trying to get boot prompt...... ###
serial output waiting for auto boot pattern is :
Press any key to stop auto-boot...
## starting local bus error test ##
serial output for local bus error is : d 0x00400000
400000:
Data abort
Exception address
Bus error test for local error address : PASS
## starting off-board bus error test ##
serial output for off-board bus error is : d 0x90000000
90000000:
Data abort
Exception address
Bus error test for off-board error address : PASS
## starting boot line commands test ##
serial output of "?" command was :
?
? - print this list
@ - boot (load and go)
p - print boot params
c - change boot params
l - load boot file
g adrs - go to adrs
d adrs[,n] - display memory
m adrs - modify memory
f adrs, nbytes, value - fill memory
t adrs, adrs, nbytes - copy memory
e - print fatal exception
v - print boot logo with version
n netif - print network interface device address
N - set ethernet address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
Boot flags
serial output of "p" command was :
0x80 - use tftp to get boot image
0x100 - use proxy arp
available boot device
serial output of "e" command was :
: 147.11.96.138
user (u) : csb
ftp password (pw) : csb
flags (f) : 0x8
target name (tn) : csb337
[VxWorks Boot]:
serial output of command "f 0x20000800,1,0x5a" was :
f 0x20000800,1,0x5a
[VxWorks Boot]:
serial output of command "f 0x20000800,1,0xa5" was :
f 0x20000800,1,0xa5
[VxWorks Boot]:
serial output of command "d 0x20000800,1" was :
d 0x20000800,1
20000800: 00a5
serial output of command "m 0x20000800 55aa" was :
m 0x20000800
55a20000800: 00a5a-
.20000802:
0000-
[VxWorks Boot]:
serial output of command "d 0x20000800,1" was :
d 0x20000800,1
20000800: 55aa
serial output after "c" command was :
c
emac
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : em
ac0 hoprocessor number : 0 host namet : ho
st vfile namex : vxWWorkos rks
1inet on ethernet (e)4 : 1477.11..96.160 1.96.60
.
inet on backplane (b)1: host inet (h) : 1477.11.96.1138 1.96.138
.
cgateway inet (g) : suser (u) : cbsb
cftp password (pw) (blank = use rsh): cssb b
0flags (f) : 0x8 x8
ctarget name (tn) : cssb33b7 337
.startup script (s)
: other (o) .:
[VxWorks Boot]:
serial output after "@" command was :
@
boot device : emac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 147.11.96.60
host inet (h) : 147.11.96.138
user (u) : csb
ftp password (pw) : csb
flags (f) : 0x8
target name (tn) : csb337
Attached TCP/IP interface to emac0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... 722224
Starting at 0x20001000...
Attached TCP/IP interface to emac unit 0
Attaching interface lo0...done
Loading symbol table from host:vxWorks.sym ...done
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
CPU: CSB337 - Atmel AT91RM9200 (ARM). Processor #0.
Memory Size: 0x2000000. BSP version 1.2/0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.
serial output waiting for auto boot pattern is :
Press any key to stop auto-boot...
serial output while loading vxWorks image was:
l
boot device : emac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 147.11.96.60
host inet (h) : 147.11.96.138
user (u) : csb
ftp password (pw) : csb
flags (f) : 0x8
target name (tn) : csb337
Attached TCP/IP interface to emac0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... 722224
entry = 0x20001000
[VxWorks Boot]:
entry is : 0x20001000
serial output while executing "g 0x20001000" was:
g 0x20001000
Starting at 0x20001000...
Attached TCP/IP interface to emac unit 0
Attaching interface lo0...done
Loading symbol table from host:vxWorks.sym ...done
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
CPU: CSB337 - Atmel AT91RM9200 (ARM). Processor #0.
Memory Size: 0x2000000. BSP version 1.2/0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.
boot commands test : PASS
### Rebooting target .... ###
serial output waiting for auto boot pattern is :
Press any key to stop auto-boot...
serial output after sending boot line parameters is : c
emac
'.' = clear field; '-' = go to previous field; ^D = quit
0boot device : e
mac0h oprocessor number : s0 thost name : h
ost vxfile name : vWxWoroks rks
1inet on ethernet (e)4 : 1477.11..96.60 1.96.60
.
inet on backplane (b)1: host inet (h)4 : 1477.11..96.1138 1.96.138
.
cgateway inet (g) : suser (u) : cbsb
cftp password (pw) (blank = use rsh): cssb b
0flags (f) : 0x8 x8
ctarget name (tn) : cssb33b7 337
.startup script (s)
: other (o) .:
[VxWorks Boot]:
reboot pattern received is : @
boot device : emac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 147.11.96.60
host inet (h) : 147.11.96.138
user (u) : csb
ftp password (pw) : csb
flags (f) : 0x8
target name (tn) : csb337
Attached TCP/IP interface to emac0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... 722224
Starting at 0x20001000...
Attached TCP/IP interface to emac unit 0
Attaching interface lo0...done
Loading symbol table from host:vxWorks.sym ...done
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
CPU: CSB337 - Atmel AT91RM9200 (ARM). Processor #0.
Memory Size: 0x2000000. BSP version 1.2/0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Connecting targetserver....
Targetserver reconnected
End of test : Thu Oct 14 10:48:24 W. Europe Daylight Time 2004
Final Results are :
Tests RUN 4
Tests PASSED 4
Tests FAILED 0
Tests SKIPPED 0
End of BSP Validation Test : Thu Oct 14 10:48:24 W. Europe Daylight Time 2004
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -