can.opt

CAN总线源程序,欢迎大家共同学习

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,0,0,27,27,0,<.\CAN_MAIN.c><CAN_MAIN.c> { 44,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,176,1,0,0,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,212,2,0,0,61,1,0,0 }
OPTFFF 1,2,1,0,0,81,81,0,<.\out.c><out.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,66,0,0,0,87,0,0,0,26,3,0,0,149,1,0,0 }
OPTFFF 1,3,5,0,0,1,14,0,<.\out.h><out.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,65,0,0,0,216,0,0,0,25,3,0,0,22,2,0,0 }
OPTFFF 1,4,5,0,0,21,21,0,<.\head.h><head.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,216,2,0,0,62,1,0,0 }
OPTFFF 1,5,1,0,0,1,12,0,<.\delay.c><delay.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,110,0,0,0,145,0,0,0,70,3,0,0,207,1,0,0 }

ExtF <.\out.h> 1,14,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,65,0,0,0,216,0,0,0,25,3,0,0,22,2,0,0 }
ExtF <.\head.h> 21,21,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,216,2,0,0,62,1,0,0 }
ExtF <.\CAN_MAIN.src> 115,124,0,{ 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,216,2,0,0,62,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTLT 1,1,1,0,1,1,0,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,1,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0313.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 509,0,()()()()()()()()()() ()()()()
  OPTMM 1,0,(0x08)
  OPTSY 0,0,(*)
  OPTDF 0x82
  OPTLE <>
  OPTLC <>
EndOpt