led.c

来自「s3c2440 io_port模块的代码。用ADS1.2开发。」· C语言 代码 · 共 32 行

#include "def.h"
#include "option.h"
#include "2440addr.h"
#include "2440lib.h" 
//***************************[ PORTS ]****************************************************
void Port_Init(void)
{
    //CAUTION:Follow the configuration order for setting the ports. 
    // 1) setting value(GPnDAT) 
    // 2) setting control register  (GPnCON)
    // 3) configure pull-up resistor(GPnUP)  

    //*** PORT F GROUP
    //Ports  : GPF7   GPF6   GPF5   GPF4      GPF3     GPF2  GPF1   GPF0
    //Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
    //Setting: Output Output Output Output    EINT3    EINT2 EINT1  EINT0
    //Binary :  01      01 ,  01     01  ,     10       10  , 10     10
    rGPFCON = 0x55aa;
    rGPFUP  = 0xff;     // The pull up function is disabled GPF[7:0]

}

//**************************[ BOARD LED ]*********************************
void Led_Display(int data)
{
          //Active is low.(LED On)
          // GPF7  GPF6   GPF5   GPF4
          //nLED_8 nLED4 nLED_2 nLED_1
//    rGPFDAT = (rGPFDAT & 0xf) | !((data & 0xf)<<4);
	  data = 2 << (data-1);
    rGPFDAT = (rGPFDAT & ~(0xf<<4)) | ((~data & 0xf)<<4);    
}