⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 idmr.h

📁 from wangkj@yahoo.com 电路原理图和详细说明: amd.9966.org或者 arm.9966.org 都是原创,包括boot, loader,u-boot,linu
💻 H
字号:
/* * Configuration settings for the iDMR board * * Based on MC5272C3, r5200  and M5271EVB board configs * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de. * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#ifndef _IDMR_H#define _IDMR_H/* * High Level Configuration Options (easy to change) */#define CONFIG_MCF52x2		/* define processor family */#define CONFIG_M5271		/* define processor type */#define CONFIG_IDMR		/* define board type */#undef CONFIG_WATCHDOG		/* disable watchdog *//* * Default environment settings */#define CONFIG_BOOTCOMMAND	"run net_nfs"#define CONFIG_BOOTDELAY	5#define CONFIG_BAUDRATE		19200#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }#define CONFIG_ETHADDR		00:06:3b:01:41:55#define CONFIG_ETHPRIME#define CONFIG_IPADDR		192.168.30.1#define CONFIG_SERVERIP		192.168.1.1#define CONFIG_ROOTPATH#define CONFIG_GATEWAYIP	192.168.1.1#define CONFIG_NETMASK		255.255.0.0#define CONFIG_HOSTNAME		idmr#define CONFIG_BOOTFILE		/tftpboot/idmr/uImage#define CONFIG_PREBOOT		"echo;echo Type \"run flash_nfs\" to mount root " \				"filesystem over NFS; echo"#define CONFIG_EXTRA_ENV_SETTINGS					\	"netdev=eth0\0"							\	"ramargs=setenv bootargs root=/dev/ram rw\0"			\	"addip=setenv bootargs $(bootargs) "				\		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\		"$(ramdisk_addr)\0"					\	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\	"nfsargs=setenv bootargs root=/dev/nfs rw "			\		"nfsroot=$(serverip):$(rootpath)\0"			\	"ethact=FEC ETHERNET\0"						\	"update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; "	\		"cp.b 200000 ff800000 $(filesize);"			\		"prot on ff800000 ff81ffff\0"				\	"load=tftp 200000 $(u-boot)\0"					\	"u-boot=/tftpboot/idmr/u-boot.bin\0"				\	""/* * Commands' definition */#define CONFIG_COMMANDS		((CONFIG_CMD_DFL		| \					CFG_CMD_PING		| \					CFG_CMD_NET		| \					CFG_CMD_MII)		& \					~(CFG_CMD_LOADS		| \						CFG_CMD_LOADB))/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */#include <cmd_confdefs.h>/* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. *//* * Configuration for environment, which occupies third sector in flash. */#ifndef CONFIG_MONITOR_IS_IN_RAM#define CFG_ENV_ADDR		0xff820000#define CFG_ENV_SECT_SIZE	0x10000#define CFG_ENV_SIZE		0x2000#define CFG_ENV_IS_IN_FLASH#else /* CONFIG_MONITOR_IS_IN_RAM */#define CFG_ENV_OFFSET		0x4000#define CFG_ENV_SECT_SIZE	0x2000#define CFG_ENV_IS_IN_FLASH#endif /* !CONFIG_MONITOR_IS_IN_RAM */#define CFG_PROMPT		"=> "#define CFG_LONGHELP				/* undef to save memory */#if (CONFIG_COMMANDS & CFG_CMD_KGDB)#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */#define CFG_CBSIZE		256		/* Console I/O Buffer Size */#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */#define CFG_MAXARGS		16		/* max number of command args */#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */#define CFG_LOAD_ADDR		0x00100000#define CFG_MEMTEST_START	0x400#define CFG_MEMTEST_END		0x380000#define CFG_HZ			(50000000 / 64)#define CFG_CLK			100000000#define CFG_MBAR		0x40000000	/* Register Base Addrs *//* * Ethernet */#define FEC_ENET#define CONFIG_NET_RETRY_COUNT	5#define CFG_ENET_BD_BASE	0x480000#define CFG_DISCOVER_PHY	1#define CONFIG_MII		1/* * Definitions for initial stack pointer and data area (in DPRAM) */#define CFG_INIT_RAM_ADDR	0x20000000#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET/* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */#define CFG_SDRAM_BASE		0x00000000#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */#define CFG_FLASH_BASE		0xff800000#ifdef CONFIG_MONITOR_IS_IN_RAM#define CFG_MONITOR_BASE	0x20000#else /* !CONFIG_MONITOR_IS_IN_RAM */#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)#endif /* CONFIG_MONITOR_IS_IN_RAM */#define CFG_MONITOR_LEN		0x20000#define CFG_MALLOC_LEN		(256 << 10)#define CFG_BOOTPARAMS_LEN	(64*1024)/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux *//* FLASH organization */#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */#define CFG_FLASH_ERASE_TOUT	1000#define CFG_FLASH_SIZE		0x800000/* * #define CFG_FLASH_USE_BUFFER_WRITE	1 *//* Cache Configuration */#define CFG_CACHELINE_SIZE	16/* Port configuration */#define CFG_FECI2C		0xF0#endif /* _IDMR_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -