config.glacier2

ICE-3.2 一个开源的中间件

#
# Set the instance name
#
Glacier2.InstanceName=DemoGlacier2

#
# We must set the stack size of new threads created by Glacier2. The
# default on Linux is typically in the 10MB range, which is way too
# high.
#
# Since Glacier2 always uses thread-per-connection mode, we must use
# the property below to set the thread stack size. Internal Glacier2
# threads also use this property value.
#
Ice.ThreadPerConnection.StackSize=262144

#
# The client-visible endpoint of Glacier2. This should be an endpoint
# visible from the public Internet, and it should be secure.
# 
Glacier2.Client.Endpoints=ssl -p 10005 -h 127.0.0.1

#
# The server-visible endpoint of Glacier2. This endpoint is only
# required if callbacks are needed (leave empty otherwise). This
# should be an endpoint on an internal network (like 192.168.x.x), or
# on the loopback, so that the server is not directly accessible from
# the Internet.
#
Glacier2.Server.Endpoints=tcp -h 127.0.0.1

# 
# The configures the session manager. If no external session manager
# is used, sessions are only handled Glacier2 internally.
#
Glacier2.SessionManager=sessionmanager:tcp -h 127.0.0.1 -p 10001

# 
# For this demo, we use a dummy permissions verifier that is
# collocated with the session server process. This dummy permissions
# verifier allows any user-id / password combination.
# 
Glacier2.PermissionsVerifier=verifier:tcp -h 127.0.0.1 -p 10001

#
# The timeout for inactive sessions. If any client session is inactive
# for longer than this value, the session expires and is removed. The
# unit is seconds.
#
Glacier2.SessionTimeout=30

#
# Glacier can forward requests buffered or unbuffered. Unbuffered
# means a lower resource consumption, as buffering requires one
# additional thread per connected client or server. However, without
# buffering, messages cannot be batched and message overriding doesn't
# work either. Also, with unbuffered request forwarding, the caller
# thread blocks for twoway requests.
# The default is to use buffering (=1), in both directions.
#Glacier2.Client.Buffered=0
#Glacier2.Server.Buffered=0

#
# These two lines instruct Glacier2 to forward contexts both for
# regular routing, as well as for callbacks (reverse routing).
#
Glacier2.Client.ForwardContext=1
Glacier2.Server.ForwardContext=1

#
# To prevent Glacier2 from being flooded with requests from or to one
# particular client, Glacier2 can be configured to sleep for a certain
# period after all current requests for this client have been
# forwarded. During this sleep period, new requests for the client are
# queued. These requests are then all sent once the sleep period is
# over. The unit is milliseconds.
#
Glacier2.Client.SleepTime=500
Glacier2.Server.SleepTime=500

#
# With the two settings below, Glacier2 can be instructed to always
# batch oneways, even if they are sent with a _fwd/o instead of a
# _fwd/O context.
# The default value for Glacier2.Client.AlwaysBatch and 
# Glacier2.Server.AlwaysBatch is 0.
#Glacier2.Client.AlwaysBatch=1
#Glacier2.Server.AlwaysBatch=1

#
# Glacier2 always disables active connection management so there is no
# need to configure this manually. Connection retry does not need to
# be disabled, as it's safe for Glacier2 to retry outgoing connections
# to servers. Retry for incoming connections from clients must be
# disabled in the clients.
#

#
# Various settings to trace requests, overrides, etc.
#
Glacier2.Client.Trace.Request=1
Glacier2.Server.Trace.Request=1
Glacier2.Client.Trace.Override=1
Glacier2.Server.Trace.Override=1
Glacier2.Client.Trace.Reject=1
Glacier2.Trace.Session=1
Glacier2.Trace.RoutingTable=1

#
# Warn about connection exceptions
#
Ice.Warn.Connections=1

#
# Network Tracing
#
# 0 = no network tracing
# 1 = trace connection establishment and closure
# 2 = like 1, but more detailed
# 3 = like 2, but also trace data transfer
#
#Ice.Trace.Network=1

#
# Protocol Tracing
#
# 0 = no protocol tracing
# 1 = trace protocol messages
#
#Ice.Trace.Protocol=1

#
# Security Tracing
#
# 0 = no security tracing (default)
# 1 = trace messages
#
#IceSSL.Trace.Security=1

#
# SSL Configuration
#
Ice.Plugin.IceSSL=IceSSL:createIceSSL
IceSSL.DefaultDir=../../../certs
IceSSL.CertAuthFile=cacert.pem
IceSSL.CertFile=s_rsa1024_pub.pem
IceSSL.KeyFile=s_rsa1024_priv.pem