hal.h

本电子词典是名人928的学习机代码,主要是电子学习机AP,其他还没有传

// HAL.h: interface for the HAL class.
//
//////////////////////////////////////////////////////////////////////

#if !defined(AFX_HAL_H__ADF8583C_EC01_422F_9E16_15DA2DED036C__INCLUDED_)
#define AFX_HAL_H__ADF8583C_EC01_422F_9E16_15DA2DED036C__INCLUDED_


#include "BOL.h"

#define NORFLASH_FLASH_ERASE_CHK	0xffff		// Flash erase data
#define NORFLASH_SECTOR_NUM		19

#define SECTOR_SIZE 			512
#define DATA_SECTOR_START		536

#define NORFLASH_OK 	0
#define NORFLASH_VER_ERR	1
#define NORFLASH_TIME_ERR	2
#define NORFLASH_PAR_ERR1	3
#define NORFLASH_PAR_ERR2	4
#define NORFLASH_CHANGE 5
#define NORFLASH_REG_ERR	6

#define NORFLASH_FLASH_COM1_ADDR	0x555		// Address for flash command1
#define NORFLASH_FLASH_COM2_ADDR	0x2aa		// Address for flash command2


// Command definition
#define NORFLASH_FLASH_ERASE1		0xaa		// Flash erase command1
#define NORFLASH_FLASH_ERASE2		0x55		// Flash erase command2
#define NORFLASH_FLASH_ERASE3		0x80		// Flash erase command3
#define NORFLASH_FLASH_ERASE4		0xaa		// Flash erase command4
#define NORFLASH_FLASH_ERASE5		0x55		// Flash erase command5
#define NORFLASH_FLASH_ERASE6		0x10		// Flash erase command6 chip all erase
#define NORFLASH_FLASH_ERASE6_S 	0x30		// Flash erase command6 sector erase

#define NORFLASH_FLASH_PROG1	0xaa		// Flash byte program command1
#define NORFLASH_FLASH_PROG2	0x55		// Flash byte program command2
#define NORFLASH_FLASH_PROG3	0xa0		// Flash byte program command3

#define NORFLASH_FLASH_RESET	0xf0		// Flash reset command

#define NORFLASH_FLASH_POLL_DQ5 	0x20		// Flash DQ5 mask
#define NORFLASH_FLASH_POLL_DQ7 	0x80		// Flash DQ7 mask
#define NORFLASH_FLASH_POLL_DQ3 	0x08		// Flash DQ3 mask

#define NORFLASH_YES TRUE
#define NORFLASH_NO	FALSE



UINT16 NorFlash_Write_Word(UINT32 addr, UINT16 wData);
UINT16 dq_poll(UINT32 addr);
void reset_flash(UINT32 addr);
void emb_program(UINT32 addr, UINT16 data);
UINT16 NorFlash_Erase(UINT32 block1,UINT32 block2);
UINT16 NorFlash_Chip_Erase(UINT32 addrtemp,UINT16 sectflag);
void NorFlashInit(void);
UINT16 NorFlashIO(UINT32 dwLBA, UINT16 wPages, void *pData);

UINT HAL_Init(void);
INT32 HAL_Read(DWORD uLN, unsigned short uLen, BYTE *pData); // LN: Logic Number
DWORD HAL_Write(DWORD uLN, unsigned short uLen, BYTE *pData);

#define SEC_PER_TRACK	0x3F
#define TRA_PER_HEAD	0x3FF
#define	NUM_OF_HEADS	0xFF

extern BOOL g_bCardConnect;
extern PTABLE_ENTRY USB_PTABLE[4];

#endif // !defined(AFX_HAL_H__ADF8583C_EC01_422F_9E16_15DA2DED036C__INCLUDED_)