📄 dxerror.pas
字号:
f:textfile;
begin
if Error=0 then exit;
s:=ExtractFilePath(ParamStr(0))+'DXError.log';
msg:=msg+' ('+DXErrorString(Error)+')';
assignfile(f,s);
append(f);
if ioresult<>0 then begin
rewrite(f);
writeln(f,'Rapport d''erreur DirectDraw (vous pouvez supprimer ce fichier)');
writeln(f,'---------------------------------------------------------------');
end;
writeln(f,msg);
closefile(f);
ShellExecute(0,'open',pchar(s),nil,nil,SW_SHOW);
halt;// raise EDXError.Create(msg);
end;
function DXErrorString(Value: HResult) : string;
begin
case Value of
0: Result := 'The request completed successfully.';
DDERR_ALREADYINITIALIZED: Result := 'This object is already initialized.';
DDERR_BLTFASTCANTCLIP: Result := ' if a clipper object is attached to the source surface passed into a BltFast call.';
DDERR_CANNOTATTACHSURFACE: Result := 'This surface can not be attached to the requested surface.';
DDERR_CANNOTDETACHSURFACE: Result := 'This surface can not be detached from the requested surface.';
DDERR_CANTCREATEDC: Result := 'Windows can not create any more DCs.';
DDERR_CANTDUPLICATE: Result := 'Cannot duplicate primary & 3D surfaces, or surfaces that are implicitly created.';
DDERR_CLIPPERISUSINGHWND: Result := 'An attempt was made to set a cliplist for a clipper object that is already monitoring an hwnd.';
DDERR_COLORKEYNOTSET: Result := 'No src color key specified for this operation.';
DDERR_CURRENTLYNOTAVAIL: Result := 'Support is currently not available.';
DDERR_DIRECTDRAWALREADYCREATED: Result := 'A DirectDraw object representing this driver has already been created for this process.';
DDERR_EXCEPTION: Result := 'An exception was encountered while performing the requested operation.';
DDERR_EXCLUSIVEMODEALREADYSET: Result := 'An attempt was made to set the cooperative level when it was already set to exclusive.';
DDERR_GENERIC: Result := 'Generic failure.';
DDERR_HEIGHTALIGN: Result := 'Height of rectangle provided is not a multiple of reqd alignment.';
DDERR_HWNDALREADYSET: Result := 'The CooperativeLevel HWND has already been set. It can not be reset while the process has surfaces or palettes created.';
DDERR_HWNDSUBCLASSED: Result := 'HWND used by DirectDraw CooperativeLevel has been subclassed, this prevents DirectDraw from restoring state.';
DDERR_IMPLICITLYCREATED: Result := 'This surface can not be restored because it is an implicitly created surface.';
DDERR_INCOMPATIBLEPRIMARY: Result := 'Unable to match primary surface creation request with existing primary surface.';
DDERR_INVALIDCAPS: Result := 'One or more of the caps bits passed to the callback are incorrect.';
DDERR_INVALIDCLIPLIST: Result := 'DirectDraw does not support the provided cliplist.';
DDERR_INVALIDDIRECTDRAWGUID: Result := 'The GUID passed to DirectDrawCreate is not a valid DirectDraw driver identifier.';
DDERR_INVALIDMODE: Result := 'DirectDraw does not support the requested mode.';
DDERR_INVALIDOBJECT: Result := 'DirectDraw received a pointer that was an invalid DIRECTDRAW object.';
DDERR_INVALIDPARAMS: Result := 'One or more of the parameters passed to the function are incorrect.';
DDERR_INVALIDPIXELFORMAT: Result := 'The pixel format was invalid as specified.';
DDERR_INVALIDPOSITION: Result := 'Returned when the position of the overlay on the destination is no longer legal for that destination.';
DDERR_INVALIDRECT: Result := 'Rectangle provided was invalid.';
DDERR_LOCKEDSURFACES: Result := 'Operation could not be carried out because one or more surfaces are locked.';
DDERR_NO3D: Result := 'There is no 3D present.';
DDERR_NOALPHAHW: Result := 'Operation could not be carried out because there is no alpha accleration hardware present or available.';
DDERR_NOBLTHW: Result := 'No blitter hardware present.';
DDERR_NOCLIPLIST: Result := 'No cliplist available.';
DDERR_NOCLIPPERATTACHED: Result := 'No clipper object attached to surface object.';
DDERR_NOCOLORCONVHW: Result := 'Operation could not be carried out because there is no color conversion hardware present or available.';
DDERR_NOCOLORKEY: Result := 'Surface does not currently have a color key';
DDERR_NOCOLORKEYHW: Result := 'Operation could not be carried out because there is no hardware support of the destination color key.';
DDERR_NOCOOPERATIVELEVELSET: Result := 'Create function called without DirectDraw object method SetCooperativeLevel being called.';
DDERR_NODC: Result := 'No DC was ever created for this surface.';
DDERR_NODDROPSHW: Result := 'No DirectDraw ROP hardware.';
DDERR_NODIRECTDRAWHW: Result := 'A hardware-only DirectDraw object creation was attempted but the driver did not support any hardware.';
DDERR_NOEMULATION: Result := 'Software emulation not available.';
DDERR_NOEXCLUSIVEMODE: Result := 'Operation requires the application to have exclusive mode but the application does not have exclusive mode.';
DDERR_NOFLIPHW: Result := 'Flipping visible surfaces is not supported.';
DDERR_NOGDI: Result := 'There is no GDI present.';
DDERR_NOHWND: Result := 'Clipper notification requires an HWND or no HWND has previously been set as the CooperativeLevel HWND.';
DDERR_NOMIRRORHW: Result := 'Operation could not be carried out because there is no hardware present or available.';
DDERR_NOOVERLAYDEST: Result := 'Returned when GetOverlayPosition is called on an overlay that UpdateOverlay has never been called on to establish a destination.';
DDERR_NOOVERLAYHW: Result := 'Operation could not be carried out because there is no overlay hardware present or available.';
DDERR_NOPALETTEATTACHED: Result := 'No palette object attached to this surface.';
DDERR_NOPALETTEHW: Result := 'No hardware support for 16 or 256 color palettes.';
DDERR_NORASTEROPHW: Result := 'Operation could not be carried out because there is no appropriate raster op hardware present or available.';
DDERR_NOROTATIONHW: Result := 'Operation could not be carried out because there is no rotation hardware present or available.';
DDERR_NOSTRETCHHW: Result := 'Operation could not be carried out because there is no hardware support for stretching.';
DDERR_NOT4BITCOLOR: Result := 'DirectDrawSurface is not in 4 bit color palette and the requested operation requires 4 bit color palette.';
DDERR_NOT4BITCOLORINDEX: Result := 'DirectDrawSurface is not in 4 bit color index palette and the requested operation requires 4 bit color index palette.';
DDERR_NOT8BITCOLOR: Result := 'DirectDrawSurface is not in 8 bit color mode and the requested operation requires 8 bit color.';
DDERR_NOTAOVERLAYSURFACE: Result := 'Returned when an overlay member is called for a non-overlay surface.';
DDERR_NOTEXTUREHW: Result := 'Operation could not be carried out because there is no texture mapping hardware present or available.';
DDERR_NOTFLIPPABLE: Result := 'An attempt has been made to flip a surface that is not flippable.';
DDERR_NOTFOUND: Result := 'Requested item was not found.';
DDERR_NOTLOCKED: Result := 'Surface was not locked. An attempt to unlock a surface that was not locked at all, or by this process, has been attempted.';
DDERR_NOTPALETTIZED: Result := 'The surface being used is not a palette-based surface.';
DDERR_NOVSYNCHW: Result := 'Operation could not be carried out because there is no hardware support for vertical blank synchronized operations.';
DDERR_NOZBUFFERHW: Result := 'Operation could not be carried out because there is no hardware support for zbuffer blitting.';
DDERR_NOZOVERLAYHW: Result := 'Overlay surfaces could not be z layered based on their BltOrder because the hardware does not support z layering of overlays.';
DDERR_OUTOFCAPS: Result := 'The hardware needed for the requested operation has already been allocated.';
DDERR_OUTOFMEMORY: Result := 'DirectDraw does not have enough memory to perform the operation.';
DDERR_OUTOFVIDEOMEMORY: Result := 'DirectDraw does not have enough memory to perform the operation.';
DDERR_OVERLAYCANTCLIP: Result := 'The hardware does not support clipped overlays.';
DDERR_OVERLAYCOLORKEYONLYONEACTIVE: Result := 'Can only have ony color key active at one time for overlays.';
DDERR_OVERLAYNOTVISIBLE: Result := 'Returned when GetOverlayPosition is called on a hidden overlay.';
DDERR_PALETTEBUSY: Result := 'Access to this palette is being refused because the palette is already locked by another thread.';
DDERR_PRIMARYSURFACEALREADYEXISTS: Result := 'This process already has created a primary surface.';
DDERR_REGIONTOOSMALL: Result := 'Region passed to Clipper::GetClipList is too small.';
DDERR_SURFACEALREADYATTACHED: Result := 'This surface is already attached to the surface it is being attached to.';
DDERR_SURFACEALREADYDEPENDENT: Result := 'This surface is already a dependency of the surface it is being made a dependency of.';
DDERR_SURFACEBUSY: Result := 'Access to this surface is being refused because the surface is already locked by another thread.';
DDERR_SURFACEISOBSCURED: Result := 'Access to surface refused because the surface is obscured.';
DDERR_SURFACELOST: Result := 'Access to this surface is being refused because the surface memory is gone. The DirectDrawSurface object representing this surface should have Restore called on it.';
DDERR_SURFACENOTATTACHED: Result := 'The requested surface is not attached.';
DDERR_TOOBIGHEIGHT: Result := 'Height requested by DirectDraw is too large.';
DDERR_TOOBIGSIZE: Result := 'Size requested by DirectDraw is too large, but the individual height and width are OK.';
DDERR_TOOBIGWIDTH: Result := 'Width requested by DirectDraw is too large.';
DDERR_UNSUPPORTED: Result := 'Action not supported.';
DDERR_UNSUPPORTEDFORMAT: Result := 'FOURCC format requested is unsupported by DirectDraw.';
DDERR_UNSUPPORTEDMASK: Result := 'Bitmask in the pixel format requested is unsupported by DirectDraw.';
DDERR_VERTICALBLANKINPROGRESS: Result := 'Vertical blank is in progress.';
DDERR_WASSTILLDRAWING: Result := 'Informs DirectDraw that the previous Blt which is transfering information to or from this Surface is incomplete.';
DDERR_WRONGMODE: Result := 'This surface can not be restored because it was created in a different mode.';
DDERR_XALIGN: Result := 'Rectangle provided was not horizontally aligned on required boundary.';
// new:
DDERR_OVERLAPPINGRECTS: Result := 'Operation could not be carried out because the source and destination rectangles are on the same surface and overlap each other.';
DDERR_INVALIDSTREAM: Result := 'The specified stream contains invalid data';
DDERR_UNSUPPORTEDMODE: Result := 'The display is currently in an unsupported mode';
DDERR_NOMIPMAPHW: Result := 'Operation could not be carried out because there is no mip-map texture mapping hardware present or available.';
DDERR_INVALIDSURFACETYPE: Result := 'The requested action could not be performed because the surface was of the wrong type.';
DDERR_NOOPTIMIZEHW: Result := 'Device does not support optimized surfaces, therefore no video memory optimized surfaces';
DDERR_NOTLOADED: Result := 'Surface is an optimized surface, but has not yet been allocated any memory';
DDERR_NOFOCUSWINDOW: Result := 'Attempt was made to create or set a device window without first setting the focus window';
DDERR_DCALREADYCREATED: Result := 'A DC has already been returned for this surface. Only one DC can be retrieved per surface.';
DDERR_NONONLOCALVIDMEM: Result := 'An attempt was made to allocate non-local video memory from a device that does not support non-local video memory.';
DDERR_CANTPAGELOCK: Result := 'The attempt to page lock a surface failed.';
DDERR_CANTPAGEUNLOCK: Result := 'The attempt to page unlock a surface failed.';
DDERR_NOTPAGELOCKED: Result := 'An attempt was made to page unlock a surface with no outstanding page locks.';
DDERR_MOREDATA: Result := 'There is more data available than the specified buffer size could hold';
DDERR_EXPIRED: Result := 'The data has expired and is therefore no longer valid.';
DDERR_VIDEONOTACTIVE: Result := 'The video port is not active';
DDERR_DEVICEDOESNTOWNSURFACE: Result := 'Surfaces created by one direct draw device cannot be used directly by another direct draw device.';
DDERR_NOTINITIALIZED: Result := 'An attempt was made to invoke an interface member of a DirectDraw object created by CoCreateInstance() before it was initialized.';
else Result := 'Unrecognized Error';
end;
end;
initialization
if FileExists('dxerror.log') then begin
ShellExecute(0,'open','dxerror.log',nil,nil,SW_SHOW);
halt;
end;
end.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -