pwm.opt

这里是LPC系统的PWM发生程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0
GRPOPT 2,(Debugger Scripts),1,0,0
GRPOPT 3,(Documentation),1,0,0

OPTFFF 1,1,1,0,0,1,51,0,<.\pwmMain.c><pwmMain.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,167,0,0,0,66,0,0,0,167,4,0,0,145,2,0,0 }
OPTFFF 2,2,5,0,0,1,1,0,<.\debug.ini><debug.ini> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,8,1,0,0,8,1,0,0,8,5,0,0,87,3,0,0 }
OPTFFF 2,3,5,0,0,25,25,0,<.\pwm.ini><pwm.ini> { 44,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,63,3,0,0,252,255,255,255,233,255,255,255,86,0,0,0,19,0,0,0,66,3,0,0,222,1,0,0 }
OPTFFF 3,4,5,0,0,0,0,0,<.\abstract.txt><abstract.txt> 

ExtF <.\pwm.ini> 25,25,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,63,3,0,0,252,255,255,255,233,255,255,255,86,0,0,0,19,0,0,0,66,3,0,0,222,1,0,0 }
ExtF <.\debug.ini> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,8,1,0,0,8,1,0,0,8,5,0,0,87,3,0,0 }

TARGOPT 1, (Target 1)
 CLK51=20000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\87LPC768.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Programmer's Guide & Instruction Set Manual)<DATASHTS\PHILIPS\UPROGGUI.PDF>
  OPTDL (S8051.DLL)()(DLPC.DLL)(-pLPC768)(S8051.DLL)()(TLPC.DLL)(-pLPC768)
  OPTDBG 501,0,()()()()(.\debug.ini)()()()()() ()()()()
  OPTBB 0,0,51,1,-16777183,0,0,0,0,1,<PWMMAIN.C>(pwm_Output())(\PWMMAIN\51)
  OPTDF 0x82
  OPTLE <>
  OPTLC <>
EndOpt