📄 targetos.h
字号:
/****************************************************************************** * * (C)Copyright 1998,1999 SysKonnect, * a business unit of Schneider & Koch & Co. Datensysteme GmbH. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * The information in this file is provided "AS IS" without warranty. * ******************************************************************************//* * Operating system specific definitions for driver and * hardware module. */#ifndef TARGETOS_H#define TARGETOS_H//-------- those should go into include/linux/pci.h#define PCI_VENDOR_ID_SK 0x1148#define PCI_DEVICE_ID_SK_FP 0x4000//--------//-------- those should go into include/linux/if_fddi.h#define FDDI_MAC_HDR_LEN 13#define FDDI_RII 0x01 /* routing information bit */#define FDDI_RCF_DIR_BIT 0x80#define FDDI_RCF_LEN_MASK 0x1f#define FDDI_RCF_BROADCAST 0x8000#define FDDI_RCF_LIMITED_BROADCAST 0xA000#define FDDI_RCF_FRAME2K 0x20#define FDDI_RCF_FRAME4K 0x30//--------#undef ADDR#include <asm/io.h>#include <linux/netdevice.h>#include <linux/fddidevice.h>#include <linux/skbuff.h>#include <linux/pci.h>#include <linux/init.h>// is redefined by linux, but we need our definition#undef ADDR#ifdef MEM_MAPPED_IO#define ADDR(a) (smc->hw.iop+(a))#else#define ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))#endif#include "h/hwmtm.h"#define TRUE 1#define FALSE 0// HWM Definitions// -----------------------#define FDDI_TRACE(string, arg1, arg2, arg3) // Performance analysis.#ifdef PCI#define NDD_TRACE(string, arg1, arg2, arg3) // Performance analysis.#endif // PCI#define SMT_PAGESIZE PAGE_SIZE // Size of a memory page (power of 2).// -----------------------// SMT Definitions// -----------------------#define TICKS_PER_SECOND HZ#define SMC_VERSION 1// -----------------------// OS-Driver Definitions// -----------------------#define NO_ADDRESS 0xffe0 /* No Device (I/O) Address */#define SKFP_MAX_NUM_BOARDS 8 /* maximum number of PCI boards */#define SK_BUS_TYPE_PCI 0#define SK_BUS_TYPE_EISA 1#define FP_IO_LEN 256 /* length of IO area used */#define u8 unsigned char#define u16 unsigned short#define u32 unsigned int#define MAX_TX_QUEUE_LEN 20 // number of packets queued by driver#define MAX_FRAME_SIZE 4550#define RX_LOW_WATERMARK NUM_RECEIVE_BUFFERS / 2#define TX_LOW_WATERMARK NUM_TRANSMIT_BUFFERS - 2/*** Include the IOCTL stuff*/#include <linux/sockios.h>#define SKFPIOCTL SIOCDEVPRIVATEstruct s_skfp_ioctl { unsigned short cmd; /* Command to run */ unsigned short len; /* Length of the data buffer */ unsigned char __user *data; /* Pointer to the data buffer */};/* ** Recognised ioctl commands for the driver */#define SKFP_GET_STATS 0x05 /* Get the driver statistics */#define SKFP_CLR_STATS 0x06 /* Zero out the driver statistics */// The per-adapter driver structurestruct s_smt_os { struct net_device *dev; struct net_device *next_module; u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */ struct pci_dev pdev; /* PCI device structure */ unsigned long base_addr; unsigned char factory_mac_addr[8]; ulong SharedMemSize; ulong SharedMemHeap; void* SharedMemAddr; dma_addr_t SharedMemDMA; ulong QueueSkb; struct sk_buff_head SendSkbQueue; ulong MaxFrameSize; u8 ResetRequested; // MAC statistics structure struct fddi_statistics MacStat; // receive into this local buffer if no skb available // data will be not valid, because multiple RxDs can // point here at the same time, it must be at least // MAX_FRAME_SIZE bytes in size unsigned char *LocalRxBuffer; dma_addr_t LocalRxBufferDMA; // Version (required by SMT module). u_long smc_version ; // Required by Hardware Module (HWM). struct hw_modul hwm ; // For SMP-savety spinlock_t DriverLock; };typedef struct s_smt_os skfddi_priv;#endif // _TARGETOS_
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -