⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 dswstate.c

📁 h内核
💻 C
📖 第 1 页 / 共 2 页
字号:
/****************************************************************************** * * Module Name: dswstate - Dispatcher parse tree walk management routines * *****************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions, and the following disclaimer, *    without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer *    substantially similar to the "NO WARRANTY" disclaimer below *    ("Disclaimer") and any redistribution must be conditioned upon *    including a substantially similar Disclaimer requirement for further *    binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names *    of any contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#include <acpi/acpi.h>#include <acpi/acparser.h>#include <acpi/acdispat.h>#include <acpi/acnamesp.h>#define _COMPONENT          ACPI_DISPATCHER	 ACPI_MODULE_NAME    ("dswstate")#ifdef ACPI_FUTURE_USAGE/******************************************************************************* * * FUNCTION:    acpi_ds_result_insert * * PARAMETERS:  Object              - Object to push *              Index               - Where to insert the object *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Insert an object onto this walk's result stack * ******************************************************************************/acpi_statusacpi_ds_result_insert (	void                            *object,	u32                             index,	struct acpi_walk_state          *walk_state){	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_insert");	state = walk_state->results;	if (!state) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result object pushed! State=%p\n",			walk_state));		return (AE_NOT_EXIST);	}	if (index >= ACPI_OBJ_NUM_OPERANDS) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Index out of range: %X Obj=%p State=%p Num=%X\n",			index, object, walk_state, state->results.num_results));		return (AE_BAD_PARAMETER);	}	if (!object) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Null Object! Index=%X Obj=%p State=%p Num=%X\n",			index, object, walk_state, state->results.num_results));		return (AE_BAD_PARAMETER);	}	state->results.obj_desc [index] = object;	state->results.num_results++;	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,		"Obj=%p [%s] State=%p Num=%X Cur=%X\n",		object, object ? acpi_ut_get_object_type_name ((union acpi_operand_object *) object) : "NULL",		walk_state, state->results.num_results, walk_state->current_result));	return (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_ds_result_remove * * PARAMETERS:  Object              - Where to return the popped object *              Index               - Where to extract the object *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In *              other words, this is a FIFO. * ******************************************************************************/acpi_statusacpi_ds_result_remove (	union acpi_operand_object       **object,	u32                             index,	struct acpi_walk_state          *walk_state){	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_remove");	state = walk_state->results;	if (!state) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result object pushed! State=%p\n",			walk_state));		return (AE_NOT_EXIST);	}	if (index >= ACPI_OBJ_MAX_OPERAND) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Index out of range: %X State=%p Num=%X\n",			index, walk_state, state->results.num_results));	}	/* Check for a valid result object */	if (!state->results.obj_desc [index]) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Null operand! State=%p #Ops=%X, Index=%X\n",			walk_state, state->results.num_results, index));		return (AE_AML_NO_RETURN_VALUE);	}	/* Remove the object */	state->results.num_results--;	*object = state->results.obj_desc [index];	state->results.obj_desc [index] = NULL;	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,		"Obj=%p [%s] Index=%X State=%p Num=%X\n",		*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",		index, walk_state, state->results.num_results));	return (AE_OK);}#endif  /*  ACPI_FUTURE_USAGE  *//******************************************************************************* * * FUNCTION:    acpi_ds_result_pop * * PARAMETERS:  Object              - Where to return the popped object *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In *              other words, this is a FIFO. * ******************************************************************************/acpi_statusacpi_ds_result_pop (	union acpi_operand_object       **object,	struct acpi_walk_state          *walk_state){	acpi_native_uint                index;	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_pop");	state = walk_state->results;	if (!state) {		return (AE_OK);	}	if (!state->results.num_results) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Result stack is empty! State=%p\n",			walk_state));		return (AE_AML_NO_RETURN_VALUE);	}	/* Remove top element */	state->results.num_results--;	for (index = ACPI_OBJ_NUM_OPERANDS; index; index--) {		/* Check for a valid result object */		if (state->results.obj_desc [index -1]) {			*object = state->results.obj_desc [index -1];			state->results.obj_desc [index -1] = NULL;			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] Index=%X State=%p Num=%X\n",				*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",				(u32) index -1, walk_state, state->results.num_results));			return (AE_OK);		}	}	ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result objects! State=%p\n", walk_state));	return (AE_AML_NO_RETURN_VALUE);}/******************************************************************************* * * FUNCTION:    acpi_ds_result_pop_from_bottom * * PARAMETERS:  Object              - Where to return the popped object *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In *              other words, this is a FIFO. * ******************************************************************************/acpi_statusacpi_ds_result_pop_from_bottom (	union acpi_operand_object       **object,	struct acpi_walk_state          *walk_state){	acpi_native_uint                index;	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_pop_from_bottom");	state = walk_state->results;	if (!state) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Warning: No result object pushed! State=%p\n", walk_state));		return (AE_NOT_EXIST);	}	if (!state->results.num_results) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result objects! State=%p\n", walk_state));		return (AE_AML_NO_RETURN_VALUE);	}	/* Remove Bottom element */	*object = state->results.obj_desc [0];	/* Push entire stack down one element */	for (index = 0; index < state->results.num_results; index++) {		state->results.obj_desc [index] = state->results.obj_desc [index + 1];	}	state->results.num_results--;	/* Check for a valid result object */	if (!*object) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null operand! State=%p #Ops=%X, Index=%X\n",			walk_state, state->results.num_results, (u32) index));		return (AE_AML_NO_RETURN_VALUE);	}	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s], Results=%p State=%p\n",		*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",		state, walk_state));	return (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_ds_result_push * * PARAMETERS:  Object              - Where to return the popped object *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Push an object onto the current result stack * ******************************************************************************/acpi_statusacpi_ds_result_push (	union acpi_operand_object       *object,	struct acpi_walk_state          *walk_state){	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_push");	state = walk_state->results;	if (!state) {		ACPI_REPORT_ERROR (("No result stack frame during push\n"));		return (AE_AML_INTERNAL);	}	if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Result stack overflow: Obj=%p State=%p Num=%X\n",			object, walk_state, state->results.num_results));		return (AE_STACK_OVERFLOW);	}	if (!object) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Object! Obj=%p State=%p Num=%X\n",			object, walk_state, state->results.num_results));		return (AE_BAD_PARAMETER);	}	state->results.obj_desc [state->results.num_results] = object;	state->results.num_results++;	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] State=%p Num=%X Cur=%X\n",		object, object ? acpi_ut_get_object_type_name ((union acpi_operand_object *) object) : "NULL",		walk_state, state->results.num_results, walk_state->current_result));	return (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_ds_result_stack_push * * PARAMETERS:  walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Push an object onto the walk_state result stack. * ******************************************************************************/acpi_statusacpi_ds_result_stack_push (	struct acpi_walk_state          *walk_state){	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_stack_push");	state = acpi_ut_create_generic_state ();	if (!state) {		return (AE_NO_MEMORY);	}	state->common.data_type = ACPI_DESC_TYPE_STATE_RESULT;	acpi_ut_push_generic_state (&walk_state->results, state);	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Results=%p State=%p\n",		state, walk_state));	return (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_ds_result_stack_pop * * PARAMETERS:  walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Pop an object off of the walk_state result stack. * ******************************************************************************/acpi_statusacpi_ds_result_stack_pop (	struct acpi_walk_state          *walk_state){	union acpi_generic_state        *state;	ACPI_FUNCTION_NAME ("ds_result_stack_pop");	/* Check for stack underflow */	if (walk_state->results == NULL) {		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Underflow - State=%p\n",			walk_state));		return (AE_AML_NO_OPERAND);	}	state = acpi_ut_pop_generic_state (&walk_state->results);	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,		"Result=%p remaining_results=%X State=%p\n",		state, state->results.num_results, walk_state));	acpi_ut_delete_generic_state (state);	return (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_ds_obj_stack_delete_all * * PARAMETERS:  walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Clear the object stack by deleting all objects that are on it. *              Should be used with great care, if at all! * ******************************************************************************/#ifdef ACPI_FUTURE_USAGEacpi_statusacpi_ds_obj_stack_delete_all (	struct acpi_walk_state          *walk_state){	u32                             i;	ACPI_FUNCTION_TRACE_PTR ("ds_obj_stack_delete_all", walk_state);	/* The stack size is configurable, but fixed */	for (i = 0; i < ACPI_OBJ_NUM_OPERANDS; i++) {		if (walk_state->operands[i]) {			acpi_ut_remove_reference (walk_state->operands[i]);			walk_state->operands[i] = NULL;		}	}	return_ACPI_STATUS (AE_OK);}#endif  /*  ACPI_FUTURE_USAGE  *//******************************************************************************* * * FUNCTION:    acpi_ds_obj_stack_push * * PARAMETERS:  Object              - Object to push *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Push an object onto this walk's object/operand stack * ******************************************************************************/acpi_statusacpi_ds_obj_stack_push (	void                            *object,	struct acpi_walk_state          *walk_state){	ACPI_FUNCTION_NAME ("ds_obj_stack_push");	/* Check for stack overflow */	if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"overflow! Obj=%p State=%p #Ops=%X\n",			object, walk_state, walk_state->num_operands));		return (AE_STACK_OVERFLOW);	}	/* Put the object onto the stack */	walk_state->operands [walk_state->num_operands] = object;	walk_state->num_operands++;	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] State=%p #Ops=%X\n",			  object, acpi_ut_get_object_type_name ((union acpi_operand_object *) object),			  walk_state, walk_state->num_operands));	return (AE_OK);}#if 0/******************************************************************************* * * FUNCTION:    acpi_ds_obj_stack_pop_object * * PARAMETERS:  pop_count           - Number of objects/entries to pop *              walk_state          - Current Walk state * * RETURN:      Status * * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT *              deleted by this routine. * ******************************************************************************/acpi_statusacpi_ds_obj_stack_pop_object (	union acpi_operand_object       **object,	struct acpi_walk_state          *walk_state){	ACPI_FUNCTION_NAME ("ds_obj_stack_pop_object");	/* Check for stack underflow */	if (walk_state->num_operands == 0) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Missing operand/stack empty! State=%p #Ops=%X\n",			walk_state, walk_state->num_operands));		*object = NULL;		return (AE_AML_NO_OPERAND);	}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -