⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rsaddr.c

📁 h内核
💻 C
📖 第 1 页 / 共 3 页
字号:
/******************************************************************************* * * Module Name: rsaddr - Address resource descriptors (16/32/64) * ******************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions, and the following disclaimer, *    without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer *    substantially similar to the "NO WARRANTY" disclaimer below *    ("Disclaimer") and any redistribution must be conditioned upon *    including a substantially similar Disclaimer requirement for further *    binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names *    of any contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#include <acpi/acpi.h>#include <acpi/acresrc.h>#define _COMPONENT          ACPI_RESOURCES	 ACPI_MODULE_NAME    ("rsaddr")/******************************************************************************* * * FUNCTION:    acpi_rs_address16_resource * * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte *                                        stream *              bytes_consumed          - Pointer to where the number of bytes *                                        consumed the byte_stream_buffer is *                                        returned *              output_buffer           - Pointer to the return data buffer *              structure_size          - Pointer to where the number of bytes *                                        in the return data struct is returned * * RETURN:      Status * * DESCRIPTION: Take the resource byte stream and fill out the appropriate *              structure pointed to by the output_buffer. Return the *              number of bytes consumed from the byte stream. * ******************************************************************************/acpi_statusacpi_rs_address16_resource (	u8                              *byte_stream_buffer,	acpi_size                       *bytes_consumed,	u8                              **output_buffer,	acpi_size                       *structure_size){	u8                              *buffer = byte_stream_buffer;	struct acpi_resource            *output_struct = (void *) *output_buffer;	u8                              *temp_ptr;	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address16);	u32                             index;	u16                             temp16;	u8                              temp8;	ACPI_FUNCTION_TRACE ("rs_address16_resource");	/*	 * Point past the Descriptor to get the number of bytes consumed	 */	buffer += 1;	ACPI_MOVE_16_TO_16 (&temp16, buffer);	/* Validate minimum descriptor length */	if (temp16 < 13) {		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);	}	*bytes_consumed = temp16 + 3;	output_struct->id = ACPI_RSTYPE_ADDRESS16;	/*	 * Get the Resource Type (Byte3)	 */	buffer += 2;	temp8 = *buffer;	/* Values 0-2 are valid */	if (temp8 > 2) {		return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);	}	output_struct->data.address16.resource_type = temp8 & 0x03;	/*	 * Get the General Flags (Byte4)	 */	buffer += 1;	temp8 = *buffer;	/* Producer / Consumer */	output_struct->data.address16.producer_consumer = temp8 & 0x01;	/* Decode */	output_struct->data.address16.decode = (temp8 >> 1) & 0x01;	/* Min Address Fixed */	output_struct->data.address16.min_address_fixed = (temp8 >> 2) & 0x01;	/* Max Address Fixed */	output_struct->data.address16.max_address_fixed = (temp8 >> 3) & 0x01;	/*	 * Get the Type Specific Flags (Byte5)	 */	buffer += 1;	temp8 = *buffer;	if (ACPI_MEMORY_RANGE == output_struct->data.address16.resource_type) {		output_struct->data.address16.attribute.memory.read_write_attribute =				(u16) (temp8 & 0x01);		output_struct->data.address16.attribute.memory.cache_attribute =				(u16) ((temp8 >> 1) & 0x03);	}	else {		if (ACPI_IO_RANGE == output_struct->data.address16.resource_type) {			output_struct->data.address16.attribute.io.range_attribute =				(u16) (temp8 & 0x03);			output_struct->data.address16.attribute.io.translation_attribute =				(u16) ((temp8 >> 4) & 0x03);		}		else {			/* BUS_NUMBER_RANGE == Address16.Data->resource_type */			/* Nothing needs to be filled in */		}	}	/*	 * Get Granularity (Bytes 6-7)	 */	buffer += 1;	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.granularity, buffer);	/*	 * Get min_address_range (Bytes 8-9)	 */	buffer += 2;	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.min_address_range, buffer);	/*	 * Get max_address_range (Bytes 10-11)	 */	buffer += 2;	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.max_address_range, buffer);	/*	 * Get address_translation_offset (Bytes 12-13)	 */	buffer += 2;	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.address_translation_offset, buffer);	/*	 * Get address_length (Bytes 14-15)	 */	buffer += 2;	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.address_length, buffer);	/*	 * Resource Source Index (if present)	 */	buffer += 2;	/*	 * This will leave us pointing to the Resource Source Index	 * If it is present, then save it off and calculate the	 * pointer to where the null terminated string goes:	 * Each Interrupt takes 32-bits + the 5 bytes of the	 * stream that are default.	 *	 * Note: Some resource descriptors will have an additional null, so	 * we add 1 to the length.	 */	if (*bytes_consumed > (16 + 1)) {		/* Dereference the Index */		temp8 = *buffer;		output_struct->data.address16.resource_source.index = (u32) temp8;		/* Point to the String */		buffer += 1;		/* Point the String pointer to the end of this structure */		output_struct->data.address16.resource_source.string_ptr =				(char *)((u8 * )output_struct + struct_size);		temp_ptr = (u8 *) output_struct->data.address16.resource_source.string_ptr;		/* Copy the string into the buffer */		index = 0;		while (0x00 != *buffer) {			*temp_ptr = *buffer;			temp_ptr += 1;			buffer += 1;			index += 1;		}		/*		 * Add the terminating null		 */		*temp_ptr = 0x00;		output_struct->data.address16.resource_source.string_length = index + 1;		/*		 * In order for the struct_size to fall on a 32-bit boundary,		 * calculate the length of the string and expand the		 * struct_size to the next 32-bit boundary.		 */		temp8 = (u8) (index + 1);		struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);	}	else {		output_struct->data.address16.resource_source.index = 0x00;		output_struct->data.address16.resource_source.string_length = 0;		output_struct->data.address16.resource_source.string_ptr = NULL;	}	/*	 * Set the Length parameter	 */	output_struct->length = (u32) struct_size;	/*	 * Return the final size of the structure	 */	*structure_size = struct_size;	return_ACPI_STATUS (AE_OK);}/******************************************************************************* * * FUNCTION:    acpi_rs_address16_stream * * PARAMETERS:  linked_list             - Pointer to the resource linked list *              output_buffer           - Pointer to the user's return buffer *              bytes_consumed          - Pointer to where the number of bytes *                                        used in the output_buffer is returned * * RETURN:      Status * * DESCRIPTION: Take the linked list resource structure and fills in the *              the appropriate bytes in a byte stream * ******************************************************************************/acpi_statusacpi_rs_address16_stream (	struct acpi_resource            *linked_list,	u8                              **output_buffer,	acpi_size                       *bytes_consumed){	u8                              *buffer = *output_buffer;	u8                              *length_field;	u8                              temp8;	char                            *temp_pointer = NULL;	acpi_size                       actual_bytes;	ACPI_FUNCTION_TRACE ("rs_address16_stream");	/*	 * The descriptor field is static	 */	*buffer = 0x88;	buffer += 1;	/*	 * Save a pointer to the Length field - to be filled in later	 */	length_field = buffer;	buffer += 2;	/*	 * Set the Resource Type (Memory, Io, bus_number)	 */	temp8 = (u8) (linked_list->data.address16.resource_type & 0x03);	*buffer = temp8;	buffer += 1;	/*	 * Set the general flags	 */	temp8 = (u8) (linked_list->data.address16.producer_consumer & 0x01);	temp8 |= (linked_list->data.address16.decode & 0x01) << 1;	temp8 |= (linked_list->data.address16.min_address_fixed & 0x01) << 2;	temp8 |= (linked_list->data.address16.max_address_fixed & 0x01) << 3;	*buffer = temp8;	buffer += 1;	/*	 * Set the type specific flags	 */	temp8 = 0;	if (ACPI_MEMORY_RANGE == linked_list->data.address16.resource_type) {		temp8 = (u8)			(linked_list->data.address16.attribute.memory.read_write_attribute &			 0x01);		temp8 |=			(linked_list->data.address16.attribute.memory.cache_attribute &			 0x03) << 1;	}	else if (ACPI_IO_RANGE == linked_list->data.address16.resource_type) {		temp8 = (u8)			(linked_list->data.address16.attribute.io.range_attribute &			 0x03);		temp8 |=			(linked_list->data.address16.attribute.io.translation_attribute &			 0x03) << 4;	}	*buffer = temp8;	buffer += 1;	/*	 * Set the address space granularity	 */	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.granularity);	buffer += 2;	/*	 * Set the address range minimum	 */	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.min_address_range);	buffer += 2;	/*	 * Set the address range maximum	 */	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.max_address_range);	buffer += 2;	/*	 * Set the address translation offset	 */	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.address_translation_offset);	buffer += 2;	/*	 * Set the address length	 */	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.address_length);	buffer += 2;	/*	 * Resource Source Index and Resource Source are optional	 */	if (0 != linked_list->data.address16.resource_source.string_length) {		temp8 = (u8) linked_list->data.address16.resource_source.index;		*buffer = temp8;		buffer += 1;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -