hwregs.c

h内核

/*******************************************************************************
 *
 * Module Name: hwregs - Read/write access functions for the various ACPI
 *                       control and status registers.
 *
 ******************************************************************************/

/*
 * Copyright (C) 2000 - 2005, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <linux/module.h>

#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#include <acpi/acevents.h>

#define _COMPONENT          ACPI_HARDWARE
	 ACPI_MODULE_NAME    ("hwregs")


/*******************************************************************************
 *
 * FUNCTION:    acpi_hw_clear_acpi_status
 *
 * PARAMETERS:  Flags           - Lock the hardware or not
 *
 * RETURN:      none
 *
 * DESCRIPTION: Clears all fixed and general purpose status bits
 *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 *
 ******************************************************************************/

acpi_status
acpi_hw_clear_acpi_status (
	u32                             flags)
{
	acpi_status                     status;


	ACPI_FUNCTION_TRACE ("hw_clear_acpi_status");


	ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %04X to %04X\n",
		ACPI_BITMASK_ALL_FIXED_STATUS,
		(u16) acpi_gbl_FADT->xpm1a_evt_blk.address));

	if (flags & ACPI_MTX_LOCK) {
		status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
	}

	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
			  ACPI_BITMASK_ALL_FIXED_STATUS);
	if (ACPI_FAILURE (status)) {
		goto unlock_and_exit;
	}

	/* Clear the fixed events */

	if (acpi_gbl_FADT->xpm1b_evt_blk.address) {
		status = acpi_hw_low_level_write (16, ACPI_BITMASK_ALL_FIXED_STATUS,
				 &acpi_gbl_FADT->xpm1b_evt_blk);
		if (ACPI_FAILURE (status)) {
			goto unlock_and_exit;
		}
	}

	/* Clear the GPE Bits in all GPE registers in all GPE blocks */

	status = acpi_ev_walk_gpe_list (acpi_hw_clear_gpe_block, ACPI_ISR);

unlock_and_exit:
	if (flags & ACPI_MTX_LOCK) {
		(void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
	}
	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_get_sleep_type_data
 *
 * PARAMETERS:  sleep_state         - Numeric sleep state
 *              *sleep_type_a        - Where SLP_TYPa is returned
 *              *sleep_type_b        - Where SLP_TYPb is returned
 *
 * RETURN:      Status - ACPI status
 *
 * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
 *              state.
 *
 ******************************************************************************/

acpi_status
acpi_get_sleep_type_data (
	u8                              sleep_state,
	u8                              *sleep_type_a,
	u8                              *sleep_type_b)
{
	acpi_status                     status = AE_OK;
	struct acpi_parameter_info      info;


	ACPI_FUNCTION_TRACE ("acpi_get_sleep_type_data");


	/*
	 * Validate parameters
	 */
	if ((sleep_state > ACPI_S_STATES_MAX) ||
		!sleep_type_a || !sleep_type_b) {
		return_ACPI_STATUS (AE_BAD_PARAMETER);
	}

	/*
	 * Evaluate the namespace object containing the values for this state
	 */
	info.parameters = NULL;
	status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_sleep_state_names[sleep_state],
			  &info);
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s while evaluating sleep_state [%s]\n",
			acpi_format_exception (status), acpi_gbl_sleep_state_names[sleep_state]));

		return_ACPI_STATUS (status);
	}

	/* Must have a return object */

	if (!info.return_object) {
		ACPI_REPORT_ERROR (("Missing Sleep State object\n"));
		status = AE_NOT_EXIST;
	}

	/* It must be of type Package */

	else if (ACPI_GET_OBJECT_TYPE (info.return_object) != ACPI_TYPE_PACKAGE) {
		ACPI_REPORT_ERROR (("Sleep State object not a Package\n"));
		status = AE_AML_OPERAND_TYPE;
	}

	/* The package must have at least two elements */

	else if (info.return_object->package.count < 2) {
		ACPI_REPORT_ERROR (("Sleep State package does not have at least two elements\n"));
		status = AE_AML_NO_OPERAND;
	}

	/* The first two elements must both be of type Integer */

	else if ((ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[0]) != ACPI_TYPE_INTEGER) ||
			 (ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[1]) != ACPI_TYPE_INTEGER)) {
		ACPI_REPORT_ERROR (("Sleep State package elements are not both Integers (%s, %s)\n",
			acpi_ut_get_object_type_name (info.return_object->package.elements[0]),
			acpi_ut_get_object_type_name (info.return_object->package.elements[1])));
		status = AE_AML_OPERAND_TYPE;
	}
	else {
		/*
		 * Valid _Sx_ package size, type, and value
		 */
		*sleep_type_a = (u8) (info.return_object->package.elements[0])->integer.value;
		*sleep_type_b = (u8) (info.return_object->package.elements[1])->integer.value;
	}

	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
			"While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
			acpi_gbl_sleep_state_names[sleep_state], info.return_object,
			acpi_ut_get_object_type_name (info.return_object)));
	}

	acpi_ut_remove_reference (info.return_object);
	return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_get_sleep_type_data);


/*******************************************************************************
 *
 * FUNCTION:    acpi_hw_get_register_bit_mask
 *
 * PARAMETERS:  register_id         - Index of ACPI Register to access
 *
 * RETURN:      The bit mask to be used when accessing the register
 *
 * DESCRIPTION: Map register_id into a register bit mask.
 *
 ******************************************************************************/

struct acpi_bit_register_info *
acpi_hw_get_bit_register_info (
	u32                             register_id)
{
	ACPI_FUNCTION_NAME ("hw_get_bit_register_info");


	if (register_id > ACPI_BITREG_MAX) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid bit_register ID: %X\n", register_id));
		return (NULL);
	}

	return (&acpi_gbl_bit_register_info[register_id]);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_get_register
 *
 * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 *              return_value    - Value that was read from the register
 *              Flags           - Lock the hardware or not
 *
 * RETURN:      Status and the value read from specified Register.  Value
 *              returned is normalized to bit0 (is shifted all the way right)
 *
 * DESCRIPTION: ACPI bit_register read function.
 *
 ******************************************************************************/

acpi_status
acpi_get_register (
	u32                             register_id,
	u32                             *return_value,
	u32                             flags)
{
	u32                             register_value = 0;
	struct acpi_bit_register_info   *bit_reg_info;
	acpi_status                     status;


	ACPI_FUNCTION_TRACE ("acpi_get_register");


	/* Get the info structure corresponding to the requested ACPI Register */

	bit_reg_info = acpi_hw_get_bit_register_info (register_id);
	if (!bit_reg_info) {
		return_ACPI_STATUS (AE_BAD_PARAMETER);
	}

	if (flags & ACPI_MTX_LOCK) {
		status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
	}

	/* Read from the register */

	status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
			  bit_reg_info->parent_register, &register_value);

	if (flags & ACPI_MTX_LOCK) {
		(void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
	}

	if (ACPI_SUCCESS (status)) {
		/* Normalize the value that was read */

		register_value = ((register_value & bit_reg_info->access_bit_mask)
				   >> bit_reg_info->bit_position);

		*return_value = register_value;

		ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read value %8.8X register %X\n",
				register_value, bit_reg_info->parent_register));
	}

	return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_get_register);


/*******************************************************************************
 *
 * FUNCTION:    acpi_set_register
 *
 * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 *              Value           - (only used on write) value to write to the
 *                                Register, NOT pre-normalized to the bit pos
 *              Flags           - Lock the hardware or not
 *
 * RETURN:      Status
 *
 * DESCRIPTION: ACPI Bit Register write function.
 *
 ******************************************************************************/

acpi_status
acpi_set_register (
	u32                             register_id,
	u32                             value,
	u32                             flags)
{
	u32                             register_value = 0;
	struct acpi_bit_register_info   *bit_reg_info;
	acpi_status                     status;


	ACPI_FUNCTION_TRACE_U32 ("acpi_set_register", register_id);


	/* Get the info structure corresponding to the requested ACPI Register */

	bit_reg_info = acpi_hw_get_bit_register_info (register_id);
	if (!bit_reg_info) {
		ACPI_REPORT_ERROR (("Bad ACPI HW register_id: %X\n", register_id));
		return_ACPI_STATUS (AE_BAD_PARAMETER);
	}

	if (flags & ACPI_MTX_LOCK) {
		status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
	}

	/* Always do a register read first so we can insert the new bits  */

	status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
			  bit_reg_info->parent_register, &register_value);
	if (ACPI_FAILURE (status)) {
		goto unlock_and_exit;
	}

	/*
	 * Decode the Register ID
	 * Register ID = [Register block ID] | [bit ID]
	 *
	 * Check bit ID to fine locate Register offset.
	 * Check Mask to determine Register offset, and then read-write.
	 */
	switch (bit_reg_info->parent_register) {
	case ACPI_REGISTER_PM1_STATUS:

		/*
		 * Status Registers are different from the rest.  Clear by
		 * writing 1, and writing 0 has no effect.  So, the only relevant
		 * information is the single bit we're interested in, all others should
		 * be written as 0 so they will be left unchanged.
		 */
		value = ACPI_REGISTER_PREPARE_BITS (value,
				 bit_reg_info->bit_position, bit_reg_info->access_bit_mask);
		if (value) {
			status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
					 ACPI_REGISTER_PM1_STATUS, (u16) value);
			register_value = 0;
		}
		break;


	case ACPI_REGISTER_PM1_ENABLE:

		ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
				bit_reg_info->access_bit_mask, value);

		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
				  ACPI_REGISTER_PM1_ENABLE, (u16) register_value);
		break;


	case ACPI_REGISTER_PM1_CONTROL:

		/*
		 * Write the PM1 Control register.
		 * Note that at this level, the fact that there are actually TWO
		 * registers (A and B - and B may not exist) is abstracted.
		 */
		ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM1 control: Read %X\n", register_value));

		ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
				bit_reg_info->access_bit_mask, value);

		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
				  ACPI_REGISTER_PM1_CONTROL, (u16) register_value);
		break;


	case ACPI_REGISTER_PM2_CONTROL:

		status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
				 ACPI_REGISTER_PM2_CONTROL, &register_value);
		if (ACPI_FAILURE (status)) {
			goto unlock_and_exit;
		}