⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 exstore.c

📁 h内核
💻 C
📖 第 1 页 / 共 2 页
字号:
/****************************************************************************** * * Module Name: exstore - AML Interpreter object store support * *****************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions, and the following disclaimer, *    without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer *    substantially similar to the "NO WARRANTY" disclaimer below *    ("Disclaimer") and any redistribution must be conditioned upon *    including a substantially similar Disclaimer requirement for further *    binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names *    of any contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#include <acpi/acpi.h>#include <acpi/acdispat.h>#include <acpi/acinterp.h>#include <acpi/amlcode.h>#include <acpi/acnamesp.h>#define _COMPONENT          ACPI_EXECUTER	 ACPI_MODULE_NAME    ("exstore")/******************************************************************************* * * FUNCTION:    acpi_ex_store * * PARAMETERS:  *source_desc        - Value to be stored *              *dest_desc          - Where to store it.  Must be an NS node *                                    or an union acpi_operand_object of type *                                    Reference; *              walk_state          - Current walk state * * RETURN:      Status * * DESCRIPTION: Store the value described by source_desc into the location *              described by dest_desc. Called by various interpreter *              functions to store the result of an operation into *              the destination operand -- not just simply the actual "Store" *              ASL operator. * ******************************************************************************/acpi_statusacpi_ex_store (	union acpi_operand_object       *source_desc,	union acpi_operand_object       *dest_desc,	struct acpi_walk_state          *walk_state){	acpi_status                     status = AE_OK;	union acpi_operand_object       *ref_desc = dest_desc;	ACPI_FUNCTION_TRACE_PTR ("ex_store", dest_desc);	/* Validate parameters */	if (!source_desc || !dest_desc) {		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null parameter\n"));		return_ACPI_STATUS (AE_AML_NO_OPERAND);	}	/* dest_desc can be either a namespace node or an ACPI object */	if (ACPI_GET_DESCRIPTOR_TYPE (dest_desc) == ACPI_DESC_TYPE_NAMED) {		/*		 * Dest is a namespace node,		 * Storing an object into a Named node.		 */		status = acpi_ex_store_object_to_node (source_desc,				 (struct acpi_namespace_node *) dest_desc, walk_state,				 ACPI_IMPLICIT_CONVERSION);		return_ACPI_STATUS (status);	}	/* Destination object must be a Reference or a Constant object */	switch (ACPI_GET_OBJECT_TYPE (dest_desc)) {	case ACPI_TYPE_LOCAL_REFERENCE:		break;	case ACPI_TYPE_INTEGER:		/* Allow stores to Constants -- a Noop as per ACPI spec */		if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {			return_ACPI_STATUS (AE_OK);		}		/*lint -fallthrough */	default:		/* Destination is not a Reference object */		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,			"Target is not a Reference or Constant object - %s [%p]\n",			acpi_ut_get_object_type_name (dest_desc), dest_desc));		ACPI_DUMP_STACK_ENTRY (source_desc);		ACPI_DUMP_STACK_ENTRY (dest_desc);		ACPI_DUMP_OPERANDS (&dest_desc, ACPI_IMODE_EXECUTE, "ex_store",				  2, "Target is not a Reference or Constant object");		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);	}	/*	 * Examine the Reference opcode.  These cases are handled:	 *	 * 1) Store to Name (Change the object associated with a name)	 * 2) Store to an indexed area of a Buffer or Package	 * 3) Store to a Method Local or Arg	 * 4) Store to the debug object	 */	switch (ref_desc->reference.opcode) {	case AML_NAME_OP:	case AML_REF_OF_OP:		/* Storing an object into a Name "container" */		status = acpi_ex_store_object_to_node (source_desc, ref_desc->reference.object,				  walk_state, ACPI_IMPLICIT_CONVERSION);		break;	case AML_INDEX_OP:		/* Storing to an Index (pointer into a packager or buffer) */		status = acpi_ex_store_object_to_index (source_desc, ref_desc, walk_state);		break;	case AML_LOCAL_OP:	case AML_ARG_OP:		/* Store to a method local/arg  */		status = acpi_ds_store_object_to_local (ref_desc->reference.opcode,				  ref_desc->reference.offset, source_desc, walk_state);		break;	case AML_DEBUG_OP:		/*		 * Storing to the Debug object causes the value stored to be		 * displayed and otherwise has no effect -- see ACPI Specification		 */		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,			"**** Write to Debug Object: Object %p %s ****:\n\n",			source_desc, acpi_ut_get_object_type_name (source_desc)));		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %s: ",			acpi_ut_get_object_type_name (source_desc)));		if (!acpi_ut_valid_internal_object (source_desc)) {		   ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT,			   "%p, Invalid Internal Object!\n", source_desc));		   break;		}		switch (ACPI_GET_OBJECT_TYPE (source_desc)) {		case ACPI_TYPE_INTEGER:			if (acpi_gbl_integer_byte_width == 4) {				ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n",					(u32) source_desc->integer.value));			}			else {				ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X%8.8X\n",					ACPI_FORMAT_UINT64 (source_desc->integer.value)));			}			break;		case ACPI_TYPE_BUFFER:			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]",				(u32) source_desc->buffer.length));			ACPI_DUMP_BUFFER (source_desc->buffer.pointer,				(source_desc->buffer.length < 32) ? source_desc->buffer.length : 32);			break;		case ACPI_TYPE_STRING:			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n",				source_desc->string.length, source_desc->string.pointer));			break;		case ACPI_TYPE_PACKAGE:			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] Elements Ptr - %p\n",				source_desc->package.count, source_desc->package.elements));			break;		default:			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "%p\n",				source_desc));			break;		}		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC, "\n"));		break;	default:		ACPI_REPORT_ERROR (("ex_store: Unknown Reference opcode %X\n",			ref_desc->reference.opcode));		ACPI_DUMP_ENTRY (ref_desc, ACPI_LV_ERROR);		status = AE_AML_INTERNAL;		break;	}	return_ACPI_STATUS (status);}/******************************************************************************* * * FUNCTION:    acpi_ex_store_object_to_index * * PARAMETERS:  *source_desc            - Value to be stored *              *dest_desc              - Named object to receive the value *              walk_state              - Current walk state * * RETURN:      Status

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -