⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 machzwd.c

📁 h内核
💻 C
字号:
/* *  MachZ ZF-Logic Watchdog Timer driver for Linux * * *  This program is free software; you can redistribute it and/or *  modify it under the terms of the GNU General Public License *  as published by the Free Software Foundation; either version *  2 of the License, or (at your option) any later version. * *  The author does NOT admit liability nor provide warranty for *  any of this software. This material is provided "AS-IS" in *  the hope that it may be useful for others. * *  Author: Fernando Fuganti <fuganti@conectiva.com.br> * *  Based on sbc60xxwdt.c by Jakob Oestergaard * * *  We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the *  following periods: *      wd#1 - 2 seconds; *      wd#2 - 7.2 ms; *  After the expiration of wd#1, it can generate a NMI, SCI, SMI, or *  a system RESET and it starts wd#2 that unconditionaly will RESET *  the system when the counter reaches zero. * *  14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> *      Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT */#include <linux/config.h>#include <linux/module.h>#include <linux/moduleparam.h>#include <linux/types.h>#include <linux/timer.h>#include <linux/jiffies.h>#include <linux/miscdevice.h>#include <linux/watchdog.h>#include <linux/fs.h>#include <linux/ioport.h>#include <linux/notifier.h>#include <linux/reboot.h>#include <linux/init.h>#include <asm/io.h>#include <asm/uaccess.h>#include <asm/system.h>/* ports */#define ZF_IOBASE	0x218#define INDEX		0x218#define DATA_B		0x219#define DATA_W		0x21A#define DATA_D		0x21A/* indexes */			/* size */#define ZFL_VERSION	0x02	/* 16   */#define CONTROL 	0x10	/* 16   */#define STATUS		0x12	/* 8    */#define COUNTER_1	0x0C	/* 16   */#define COUNTER_2	0x0E	/* 8    */#define PULSE_LEN	0x0F	/* 8    *//* controls */#define ENABLE_WD1	0x0001#define ENABLE_WD2	0x0002#define RESET_WD1	0x0010#define RESET_WD2	0x0020#define GEN_SCI		0x0100#define GEN_NMI		0x0200#define GEN_SMI		0x0400#define GEN_RESET	0x0800/* utilities */#define WD1	0#define WD2	1#define zf_writew(port, data)  { outb(port, INDEX); outw(data, DATA_W); }#define zf_writeb(port, data)  { outb(port, INDEX); outb(data, DATA_B); }#define zf_get_ZFL_version()   zf_readw(ZFL_VERSION)static unsigned short zf_readw(unsigned char port){	outb(port, INDEX);	return inw(DATA_W);}MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>");MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver");MODULE_LICENSE("GPL");MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);#ifdef CONFIG_WATCHDOG_NOWAYOUTstatic int nowayout = 1;#elsestatic int nowayout = 0;#endifmodule_param(nowayout, int, 0);MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");#define PFX "machzwd"static struct watchdog_info zf_info = {	.options		= WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,	.firmware_version	= 1,	.identity		= "ZF-Logic watchdog",};/* * action refers to action taken when watchdog resets * 0 = GEN_RESET * 1 = GEN_SMI * 2 = GEN_NMI * 3 = GEN_SCI * defaults to GEN_RESET (0) */static int action = 0;module_param(action, int, 0);MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");static int zf_action = GEN_RESET;static unsigned long zf_is_open;static char zf_expect_close;static spinlock_t zf_lock;static spinlock_t zf_port_lock;static struct timer_list zf_timer;static unsigned long next_heartbeat = 0;/* timeout for user land heart beat (10 seconds) */#define ZF_USER_TIMEO (HZ*10)/* timeout for hardware watchdog (~500ms) */#define ZF_HW_TIMEO (HZ/2)/* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */#define ZF_CTIMEOUT 0xffff#ifndef ZF_DEBUG#	define dprintk(format, args...)#else#	define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __FUNCTION__, __LINE__ , ## args)#endifstatic inline void zf_set_status(unsigned char new){	zf_writeb(STATUS, new);}/* CONTROL register functions */static inline unsigned short zf_get_control(void){	return zf_readw(CONTROL);}static inline void zf_set_control(unsigned short new){	zf_writew(CONTROL, new);}/* WD#? counter functions *//* *	Just set counter value */static inline void zf_set_timer(unsigned short new, unsigned char n){	switch(n){		case WD1:			zf_writew(COUNTER_1, new);		case WD2:			zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);		default:			return;	}}/* * stop hardware timer */static void zf_timer_off(void){	unsigned int ctrl_reg = 0;	unsigned long flags;	/* stop internal ping */	del_timer_sync(&zf_timer);	spin_lock_irqsave(&zf_port_lock, flags);	/* stop watchdog timer */	ctrl_reg = zf_get_control();	ctrl_reg |= (ENABLE_WD1|ENABLE_WD2);	/* disable wd1 and wd2 */	ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2);	zf_set_control(ctrl_reg);	spin_unlock_irqrestore(&zf_port_lock, flags);	printk(KERN_INFO PFX ": Watchdog timer is now disabled\n");}/* * start hardware timer */static void zf_timer_on(void){	unsigned int ctrl_reg = 0;	unsigned long flags;	spin_lock_irqsave(&zf_port_lock, flags);	zf_writeb(PULSE_LEN, 0xff);	zf_set_timer(ZF_CTIMEOUT, WD1);	/* user land ping */	next_heartbeat = jiffies + ZF_USER_TIMEO;	/* start the timer for internal ping */	zf_timer.expires = jiffies + ZF_HW_TIMEO;	add_timer(&zf_timer);	/* start watchdog timer */	ctrl_reg = zf_get_control();	ctrl_reg |= (ENABLE_WD1|zf_action);	zf_set_control(ctrl_reg);	spin_unlock_irqrestore(&zf_port_lock, flags);	printk(KERN_INFO PFX ": Watchdog timer is now enabled\n");}static void zf_ping(unsigned long data){	unsigned int ctrl_reg = 0;	unsigned long flags;	zf_writeb(COUNTER_2, 0xff);	if(time_before(jiffies, next_heartbeat)){		dprintk("time_before: %ld\n", next_heartbeat - jiffies);		/*		 * reset event is activated by transition from 0 to 1 on		 * RESET_WD1 bit and we assume that it is already zero...		 */		spin_lock_irqsave(&zf_port_lock, flags);		ctrl_reg = zf_get_control();		ctrl_reg |= RESET_WD1;		zf_set_control(ctrl_reg);		/* ...and nothing changes until here */		ctrl_reg &= ~(RESET_WD1);		zf_set_control(ctrl_reg);		spin_unlock_irqrestore(&zf_port_lock, flags);		zf_timer.expires = jiffies + ZF_HW_TIMEO;		add_timer(&zf_timer);	}else{		printk(KERN_CRIT PFX ": I will reset your machine\n");	}}static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,								loff_t *ppos){	/* See if we got the magic character */	if(count){		/*		 * no need to check for close confirmation		 * no way to disable watchdog ;)		 */		if (!nowayout) {			size_t ofs;			/*			 * note: just in case someone wrote the magic character			 * five months ago...			 */			zf_expect_close = 0;			/* now scan */			for (ofs = 0; ofs != count; ofs++){				char c;				if (get_user(c, buf + ofs))					return -EFAULT;				if (c == 'V'){					zf_expect_close = 42;					dprintk("zf_expect_close = 42\n");				}			}		}		/*		 * Well, anyhow someone wrote to us,		 * we should return that favour		 */		next_heartbeat = jiffies + ZF_USER_TIMEO;		dprintk("user ping at %ld\n", jiffies);	}	return count;}static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,	unsigned long arg){	void __user *argp = (void __user *)arg;	int __user *p = argp;	switch(cmd){		case WDIOC_GETSUPPORT:			if (copy_to_user(argp, &zf_info, sizeof(zf_info)))				return -EFAULT;			break;		case WDIOC_GETSTATUS:			return put_user(0, p);		case WDIOC_KEEPALIVE:			zf_ping(0);			break;		default:			return -ENOIOCTLCMD;	}	return 0;}static int zf_open(struct inode *inode, struct file *file){	spin_lock(&zf_lock);	if(test_and_set_bit(0, &zf_is_open)) {		spin_unlock(&zf_lock);		return -EBUSY;	}	if (nowayout)		__module_get(THIS_MODULE);	spin_unlock(&zf_lock);	zf_timer_on();	return nonseekable_open(inode, file);}static int zf_close(struct inode *inode, struct file *file){	if(zf_expect_close == 42){		zf_timer_off();	} else {		del_timer(&zf_timer);		printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");	}	spin_lock(&zf_lock);	clear_bit(0, &zf_is_open);	spin_unlock(&zf_lock);	zf_expect_close = 0;	return 0;}/* * Notifier for system down */static int zf_notify_sys(struct notifier_block *this, unsigned long code,								void *unused){	if(code == SYS_DOWN || code == SYS_HALT){		zf_timer_off();	}	return NOTIFY_DONE;}static struct file_operations zf_fops = {	.owner          = THIS_MODULE,	.llseek         = no_llseek,	.write          = zf_write,	.ioctl          = zf_ioctl,	.open           = zf_open,	.release        = zf_close,};static struct miscdevice zf_miscdev = {	.minor = WATCHDOG_MINOR,	.name = "watchdog",	.fops = &zf_fops,}; /* * The device needs to learn about soft shutdowns in order to * turn the timebomb registers off. */static struct notifier_block zf_notifier = {	.notifier_call = zf_notify_sys,};static void __init zf_show_action(int act){	char *str[] = { "RESET", "SMI", "NMI", "SCI" };	printk(KERN_INFO PFX ": Watchdog using action = %s\n", str[act]);}static int __init zf_init(void){	int ret;	printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n");	ret = zf_get_ZFL_version();	printk("%#x\n", ret);	if((!ret) || (ret != 0xffff)){		printk(KERN_WARNING PFX ": no ZF-Logic found\n");		return -ENODEV;	}	if((action <= 3) && (action >= 0)){		zf_action = zf_action>>action;	} else		action = 0;	zf_show_action(action);	spin_lock_init(&zf_lock);	spin_lock_init(&zf_port_lock);	ret = misc_register(&zf_miscdev);	if (ret){		printk(KERN_ERR "can't misc_register on minor=%d\n",							WATCHDOG_MINOR);		goto out;	}	if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){		printk(KERN_ERR "cannot reserve I/O ports at %d\n",							ZF_IOBASE);		ret = -EBUSY;		goto no_region;	}	ret = register_reboot_notifier(&zf_notifier);	if(ret){		printk(KERN_ERR "can't register reboot notifier (err=%d)\n",									ret);		goto no_reboot;	}	zf_set_status(0);	zf_set_control(0);	/* this is the timer that will do the hard work */	init_timer(&zf_timer);	zf_timer.function = zf_ping;	zf_timer.data = 0;	return 0;no_reboot:	release_region(ZF_IOBASE, 3);no_region:	misc_deregister(&zf_miscdev);out:	return ret;}void __exit zf_exit(void){	zf_timer_off();	misc_deregister(&zf_miscdev);	unregister_reboot_notifier(&zf_notifier);	release_region(ZF_IOBASE, 3);}module_init(zf_init);module_exit(zf_exit);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -