⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ohci-au1xxx.c

📁 h内核
💻 C
字号:
/* * OHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> * (C) Copyright 2002 Hewlett-Packard Company * * Bus Glue for AMD Alchemy Au1xxx * * Written by Christopher Hoover <ch@hpl.hp.com> * Based on fragments of previous driver by Rusell King et al. * * Modified for LH7A404 from ohci-sa1111.c *  by Durgesh Pattamatta <pattamattad@sharpsec.com> * Modified for AMD Alchemy Au1xxx *  by Matt Porter <mporter@kernel.crashing.org> * * This file is licenced under the GPL. */#include <asm/mach-au1x00/au1000.h>#define USBH_ENABLE_BE (1<<0)#define USBH_ENABLE_C  (1<<1)#define USBH_ENABLE_E  (1<<2)#define USBH_ENABLE_CE (1<<3)#define USBH_ENABLE_RD (1<<4)#ifdef __LITTLE_ENDIAN#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)#elif __BIG_ENDIAN#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)#else#error not byte order defined#endifextern int usb_disabled(void);/*-------------------------------------------------------------------------*/static void au1xxx_start_hc(struct platform_device *dev){	printk(KERN_DEBUG __FILE__		": starting Au1xxx OHCI USB Controller\n");	/* enable host controller */	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);	udelay(1000);	au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);	udelay(1000);	/* wait for reset complete (read register twice; see au1500 errata) */	while (au_readl(USB_HOST_CONFIG),		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))		udelay(1000);	printk(KERN_DEBUG __FILE__	": Clock to USB host has been enabled \n");}static void au1xxx_stop_hc(struct platform_device *dev){	printk(KERN_DEBUG __FILE__	       ": stopping Au1xxx OHCI USB Controller\n");	/* Disable clock */	au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);}/*-------------------------------------------------------------------------*/static irqreturn_t usb_hcd_au1xxx_hcim_irq (int irq, void *__hcd,					     struct pt_regs * r){	struct usb_hcd *hcd = __hcd;	return usb_hcd_irq(irq, hcd, r);}/*-------------------------------------------------------------------------*/void usb_hcd_au1xxx_remove (struct usb_hcd *, struct platform_device *);/* configure so an HC device and id are always provided *//* always called with process context; sleeping is OK *//** * usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. * */int usb_hcd_au1xxx_probe (const struct hc_driver *driver,			  struct usb_hcd **hcd_out,			  struct platform_device *dev){	int retval;	struct usb_hcd *hcd = 0;	unsigned int *addr = NULL;	if (!request_mem_region(dev->resource[0].start,				dev->resource[0].end				- dev->resource[0].start + 1, hcd_name)) {		pr_debug("request_mem_region failed");		return -EBUSY;	}	au1xxx_start_hc(dev);	addr = ioremap(dev->resource[0].start,		       dev->resource[0].end		       - dev->resource[0].start + 1);	if (!addr) {		pr_debug("ioremap failed");		retval = -ENOMEM;		goto err1;	}	if(dev->resource[1].flags != IORESOURCE_IRQ) {		pr_debug ("resource[1] is not IORESOURCE_IRQ");		retval = -ENOMEM;		goto err1;	}	hcd = usb_create_hcd(driver);	if (hcd == NULL) {		pr_debug ("usb_create_hcd failed");		retval = -ENOMEM;		goto err1;	}	ohci_hcd_init(hcd_to_ohci(hcd));	hcd->irq = dev->resource[1].start;	hcd->regs = addr;	hcd->self.controller = &dev->dev;	retval = hcd_buffer_create (hcd);	if (retval != 0) {		pr_debug ("pool alloc fail");		goto err2;	}	retval = request_irq (hcd->irq, usb_hcd_au1xxx_hcim_irq, SA_INTERRUPT,			      hcd->driver->description, hcd);	if (retval != 0) {		pr_debug("request_irq failed");		retval = -EBUSY;		goto err3;	}	pr_debug ("%s (Au1xxx) at 0x%p, irq %d",	     hcd->driver->description, hcd->regs, hcd->irq);	hcd->self.bus_name = "au1xxx";	usb_register_bus (&hcd->self);	if ((retval = driver->start (hcd)) < 0)	{		usb_hcd_au1xxx_remove(hcd, dev);		printk("bad driver->start\n");		return retval;	}	*hcd_out = hcd;	return 0; err3:	hcd_buffer_destroy (hcd); err2:	usb_put_hcd(hcd); err1:	au1xxx_stop_hc(dev);	release_mem_region(dev->resource[0].start,				dev->resource[0].end			   - dev->resource[0].start + 1);	return retval;}/* may be called without controller electrically present *//* may be called with controller, bus, and devices active *//** * usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_au1xxx_probe(), first invoking * the HCD's stop() method.  It is always called from a thread * context, normally "rmmod", "apmd", or something similar. * */void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev){	pr_debug ("remove: %s, state %x", hcd->self.bus_name, hcd->state);	if (in_interrupt ())		BUG ();	hcd->state = USB_STATE_QUIESCING;	pr_debug ("%s: roothub graceful disconnect", hcd->self.bus_name);	usb_disconnect (&hcd->self.root_hub);	hcd->driver->stop (hcd);	hcd->state = USB_STATE_HALT;	free_irq (hcd->irq, hcd);	hcd_buffer_destroy (hcd);	usb_deregister_bus (&hcd->self);	au1xxx_stop_hc(dev);	release_mem_region(dev->resource[0].start,			   dev->resource[0].end			   - dev->resource[0].start + 1);}/*-------------------------------------------------------------------------*/static int __devinitohci_au1xxx_start (struct usb_hcd *hcd){	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);	int		ret;	ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);	if ((ret = ohci_init (ohci)) < 0)		return ret;	if ((ret = ohci_run (ohci)) < 0) {		err ("can't start %s", hcd->self.bus_name);		ohci_stop (hcd);		return ret;	}	return 0;}/*-------------------------------------------------------------------------*/static const struct hc_driver ohci_au1xxx_hc_driver = {	.description =		hcd_name,	.product_desc =		"Au1xxx OHCI",	.hcd_priv_size =	sizeof(struct ohci_hcd),	/*	 * generic hardware linkage	 */	.irq =			ohci_irq,	.flags =		HCD_USB11,	/*	 * basic lifecycle operations	 */	.start =		ohci_au1xxx_start,#ifdef	CONFIG_PM	/* suspend:		ohci_au1xxx_suspend,  -- tbd */	/* resume:		ohci_au1xxx_resume,   -- tbd */#endif /*CONFIG_PM*/	.stop =			ohci_stop,	/*	 * managing i/o requests and associated device resources	 */	.urb_enqueue =		ohci_urb_enqueue,	.urb_dequeue =		ohci_urb_dequeue,	.endpoint_disable =	ohci_endpoint_disable,	/*	 * scheduling support	 */	.get_frame_number =	ohci_get_frame,	/*	 * root hub support	 */	.hub_status_data =	ohci_hub_status_data,	.hub_control =		ohci_hub_control,};/*-------------------------------------------------------------------------*/static int ohci_hcd_au1xxx_drv_probe(struct device *dev){	struct platform_device *pdev = to_platform_device(dev);	struct usb_hcd *hcd = NULL;	int ret;	pr_debug ("In ohci_hcd_au1xxx_drv_probe");	if (usb_disabled())		return -ENODEV;	ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, &hcd, pdev);	if (ret == 0)		dev_set_drvdata(dev, hcd);	return ret;}static int ohci_hcd_au1xxx_drv_remove(struct device *dev){	struct platform_device *pdev = to_platform_device(dev);	struct usb_hcd *hcd = dev_get_drvdata(dev);	usb_hcd_au1xxx_remove(hcd, pdev);	dev_set_drvdata(dev, NULL);	return 0;}	/*TBD*//*static int ohci_hcd_au1xxx_drv_suspend(struct device *dev){	struct platform_device *pdev = to_platform_device(dev);	struct usb_hcd *hcd = dev_get_drvdata(dev);	return 0;}static int ohci_hcd_au1xxx_drv_resume(struct device *dev){	struct platform_device *pdev = to_platform_device(dev);	struct usb_hcd *hcd = dev_get_drvdata(dev);	return 0;}*/static struct device_driver ohci_hcd_au1xxx_driver = {	.name		= "au1xxx-ohci",	.bus		= &platform_bus_type,	.probe		= ohci_hcd_au1xxx_drv_probe,	.remove		= ohci_hcd_au1xxx_drv_remove,	/*.suspend	= ohci_hcd_au1xxx_drv_suspend, */	/*.resume	= ohci_hcd_au1xxx_drv_resume, */};static int __init ohci_hcd_au1xxx_init (void){	pr_debug (DRIVER_INFO " (Au1xxx)");	pr_debug ("block sizes: ed %d td %d\n",		sizeof (struct ed), sizeof (struct td));	return driver_register(&ohci_hcd_au1xxx_driver);}static void __exit ohci_hcd_au1xxx_cleanup (void){	driver_unregister(&ohci_hcd_au1xxx_driver);}module_init (ohci_hcd_au1xxx_init);module_exit (ohci_hcd_au1xxx_cleanup);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -