⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 align.c

📁 h内核
💻 C
字号:
/* * align.c - handle alignment exceptions for the Power PC. * * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> * Copyright (c) 1998-1999 TiVo, Inc. *   PowerPC 403GCX modifications. * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> *   PowerPC 403GCX/405GP modifications. */#include <linux/config.h>#include <linux/kernel.h>#include <linux/mm.h>#include <asm/ptrace.h>#include <asm/processor.h>#include <asm/uaccess.h>#include <asm/system.h>#include <asm/cache.h>struct aligninfo {	unsigned char len;	unsigned char flags;};#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)#define	OPCD(inst)	(((inst) & 0xFC000000) >> 26)#define	RS(inst)	(((inst) & 0x03E00000) >> 21)#define	RA(inst)	(((inst) & 0x001F0000) >> 16)#define	IS_XFORM(code)	((code) == 31)#endif#define INVALID	{ 0, 0 }#define LD	1	/* load */#define ST	2	/* store */#define	SE	4	/* sign-extend value */#define F	8	/* to/from fp regs */#define U	0x10	/* update index register */#define M	0x20	/* multiple load/store */#define S	0x40	/* single-precision fp, or byte-swap value */#define SX	0x40	/* byte count in XER */#define HARD	0x80	/* string, stwcx. */#define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled *//* * The PowerPC stores certain bits of the instruction that caused the * alignment exception in the DSISR register.  This array maps those * bits to information about the operand length and what the * instruction would do. */static struct aligninfo aligninfo[128] = {	{ 4, LD },		/* 00 0 0000: lwz / lwarx */	INVALID,		/* 00 0 0001 */	{ 4, ST },		/* 00 0 0010: stw */	INVALID,		/* 00 0 0011 */	{ 2, LD },		/* 00 0 0100: lhz */	{ 2, LD+SE },		/* 00 0 0101: lha */	{ 2, ST },		/* 00 0 0110: sth */	{ 4, LD+M },		/* 00 0 0111: lmw */	{ 4, LD+F+S },		/* 00 0 1000: lfs */	{ 8, LD+F },		/* 00 0 1001: lfd */	{ 4, ST+F+S },		/* 00 0 1010: stfs */	{ 8, ST+F },		/* 00 0 1011: stfd */	INVALID,		/* 00 0 1100 */	INVALID,		/* 00 0 1101: ld/ldu/lwa */	INVALID,		/* 00 0 1110 */	INVALID,		/* 00 0 1111: std/stdu */	{ 4, LD+U },		/* 00 1 0000: lwzu */	INVALID,		/* 00 1 0001 */	{ 4, ST+U },		/* 00 1 0010: stwu */	INVALID,		/* 00 1 0011 */	{ 2, LD+U },		/* 00 1 0100: lhzu */	{ 2, LD+SE+U },		/* 00 1 0101: lhau */	{ 2, ST+U },		/* 00 1 0110: sthu */	{ 4, ST+M },		/* 00 1 0111: stmw */	{ 4, LD+F+S+U },	/* 00 1 1000: lfsu */	{ 8, LD+F+U },		/* 00 1 1001: lfdu */	{ 4, ST+F+S+U },	/* 00 1 1010: stfsu */	{ 8, ST+F+U },		/* 00 1 1011: stfdu */	INVALID,		/* 00 1 1100 */	INVALID,		/* 00 1 1101 */	INVALID,		/* 00 1 1110 */	INVALID,		/* 00 1 1111 */	INVALID,		/* 01 0 0000: ldx */	INVALID,		/* 01 0 0001 */	INVALID,		/* 01 0 0010: stdx */	INVALID,		/* 01 0 0011 */	INVALID,		/* 01 0 0100 */	INVALID,		/* 01 0 0101: lwax */	INVALID,		/* 01 0 0110 */	INVALID,		/* 01 0 0111 */	{ 4, LD+M+HARD+SX },	/* 01 0 1000: lswx */	{ 4, LD+M+HARD },	/* 01 0 1001: lswi */	{ 4, ST+M+HARD+SX },	/* 01 0 1010: stswx */	{ 4, ST+M+HARD },	/* 01 0 1011: stswi */	INVALID,		/* 01 0 1100 */	INVALID,		/* 01 0 1101 */	INVALID,		/* 01 0 1110 */	INVALID,		/* 01 0 1111 */	INVALID,		/* 01 1 0000: ldux */	INVALID,		/* 01 1 0001 */	INVALID,		/* 01 1 0010: stdux */	INVALID,		/* 01 1 0011 */	INVALID,		/* 01 1 0100 */	INVALID,		/* 01 1 0101: lwaux */	INVALID,		/* 01 1 0110 */	INVALID,		/* 01 1 0111 */	INVALID,		/* 01 1 1000 */	INVALID,		/* 01 1 1001 */	INVALID,		/* 01 1 1010 */	INVALID,		/* 01 1 1011 */	INVALID,		/* 01 1 1100 */	INVALID,		/* 01 1 1101 */	INVALID,		/* 01 1 1110 */	INVALID,		/* 01 1 1111 */	INVALID,		/* 10 0 0000 */	INVALID,		/* 10 0 0001 */	{ 0, ST+HARD },		/* 10 0 0010: stwcx. */	INVALID,		/* 10 0 0011 */	INVALID,		/* 10 0 0100 */	INVALID,		/* 10 0 0101 */	INVALID,		/* 10 0 0110 */	INVALID,		/* 10 0 0111 */	{ 4, LD+S },		/* 10 0 1000: lwbrx */	INVALID,		/* 10 0 1001 */	{ 4, ST+S },		/* 10 0 1010: stwbrx */	INVALID,		/* 10 0 1011 */	{ 2, LD+S },		/* 10 0 1100: lhbrx */	INVALID,		/* 10 0 1101 */	{ 2, ST+S },		/* 10 0 1110: sthbrx */	INVALID,		/* 10 0 1111 */	INVALID,		/* 10 1 0000 */	INVALID,		/* 10 1 0001 */	INVALID,		/* 10 1 0010 */	INVALID,		/* 10 1 0011 */	INVALID,		/* 10 1 0100 */	INVALID,		/* 10 1 0101 */	INVALID,		/* 10 1 0110 */	INVALID,		/* 10 1 0111 */	INVALID,		/* 10 1 1000 */	INVALID,		/* 10 1 1001 */	INVALID,		/* 10 1 1010 */	INVALID,		/* 10 1 1011 */	INVALID,		/* 10 1 1100 */	INVALID,		/* 10 1 1101 */	INVALID,		/* 10 1 1110 */	{ 0, ST+HARD },		/* 10 1 1111: dcbz */	{ 4, LD },		/* 11 0 0000: lwzx */	INVALID,		/* 11 0 0001 */	{ 4, ST },		/* 11 0 0010: stwx */	INVALID,		/* 11 0 0011 */	{ 2, LD },		/* 11 0 0100: lhzx */	{ 2, LD+SE },		/* 11 0 0101: lhax */	{ 2, ST },		/* 11 0 0110: sthx */	INVALID,		/* 11 0 0111 */	{ 4, LD+F+S },		/* 11 0 1000: lfsx */	{ 8, LD+F },		/* 11 0 1001: lfdx */	{ 4, ST+F+S },		/* 11 0 1010: stfsx */	{ 8, ST+F },		/* 11 0 1011: stfdx */	INVALID,		/* 11 0 1100 */	INVALID,		/* 11 0 1101: lmd */	INVALID,		/* 11 0 1110 */	INVALID,		/* 11 0 1111: stmd */	{ 4, LD+U },		/* 11 1 0000: lwzux */	INVALID,		/* 11 1 0001 */	{ 4, ST+U },		/* 11 1 0010: stwux */	INVALID,		/* 11 1 0011 */	{ 2, LD+U },		/* 11 1 0100: lhzux */	{ 2, LD+SE+U },		/* 11 1 0101: lhaux */	{ 2, ST+U },		/* 11 1 0110: sthux */	INVALID,		/* 11 1 0111 */	{ 4, LD+F+S+U },	/* 11 1 1000: lfsux */	{ 8, LD+F+U },		/* 11 1 1001: lfdux */	{ 4, ST+F+S+U },	/* 11 1 1010: stfsux */	{ 8, ST+F+U },		/* 11 1 1011: stfdux */	INVALID,		/* 11 1 1100 */	INVALID,		/* 11 1 1101 */	INVALID,		/* 11 1 1110 */	INVALID,		/* 11 1 1111 */};#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)intfix_alignment(struct pt_regs *regs){	int instr, nb, flags;#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)	int opcode, f1, f2, f3;#endif	int i, t;	int reg, areg;	int offset, nb0;	unsigned char __user *addr;	unsigned char *rptr;	union {		long l;		float f;		double d;		unsigned char v[8];	} data;	CHECK_FULL_REGS(regs);#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)	/* The 4xx-family & Book-E processors have no DSISR register,	 * so we emulate it.	 * The POWER4 has a DSISR register but doesn't set it on	 * an alignment fault.  -- paulus	 */	if (__get_user(instr, (unsigned int __user *) regs->nip))		return 0;	opcode = OPCD(instr);	reg = RS(instr);	areg = RA(instr);	if (!IS_XFORM(opcode)) {		f1 = 0;		f2 = (instr & 0x04000000) >> 26;		f3 = (instr & 0x78000000) >> 27;	} else {		f1 = (instr & 0x00000006) >> 1;		f2 = (instr & 0x00000040) >> 6;		f3 = (instr & 0x00000780) >> 7;	}	instr = ((f1 << 5) | (f2 << 4) | f3);#else	reg = (regs->dsisr >> 5) & 0x1f;	/* source/dest register */	areg = regs->dsisr & 0x1f;		/* register to update */	instr = (regs->dsisr >> 10) & 0x7f;#endif	nb = aligninfo[instr].len;	if (nb == 0) {		long __user *p;		int i;		if (instr != DCBZ)			return 0;	/* too hard or invalid instruction */		/*		 * The dcbz (data cache block zero) instruction		 * gives an alignment fault if used on non-cacheable		 * memory.  We handle the fault mainly for the		 * case when we are running with the cache disabled		 * for debugging.		 */		p = (long __user *) (regs->dar & -L1_CACHE_BYTES);		if (user_mode(regs)		    && verify_area(VERIFY_WRITE, p, L1_CACHE_BYTES))			return -EFAULT;		for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)			if (__put_user(0, p+i))				return -EFAULT;		return 1;	}	flags = aligninfo[instr].flags;	if ((flags & (LD|ST)) == 0)		return 0;	/* For the 4xx-family & Book-E processors, the 'dar' field of the	 * pt_regs structure is overloaded and is really from the DEAR.	 */	addr = (unsigned char __user *)regs->dar;	if (flags & M) {		/* lmw, stmw, lswi/x, stswi/x */		nb0 = 0;		if (flags & HARD) {			if (flags & SX) {				nb = regs->xer & 127;				if (nb == 0)					return 1;			} else {				if (__get_user(instr,					    (unsigned int __user *)regs->nip))					return 0;				nb = (instr >> 11) & 0x1f;				if (nb == 0)					nb = 32;			}			if (nb + reg * 4 > 128) {				nb0 = nb + reg * 4 - 128;				nb = 128 - reg * 4;			}		} else {			/* lwm, stmw */			nb = (32 - reg) * 4;		}		rptr = (unsigned char *) &regs->gpr[reg];		if (flags & LD) {			for (i = 0; i < nb; ++i)				if (__get_user(rptr[i], addr+i))					return -EFAULT;			if (nb0 > 0) {				rptr = (unsigned char *) &regs->gpr[0];				addr += nb;				for (i = 0; i < nb0; ++i)					if (__get_user(rptr[i], addr+i))						return -EFAULT;			}			for (; (i & 3) != 0; ++i)				rptr[i] = 0;		} else {			for (i = 0; i < nb; ++i)				if (__put_user(rptr[i], addr+i))					return -EFAULT;			if (nb0 > 0) {				rptr = (unsigned char *) &regs->gpr[0];				addr += nb;				for (i = 0; i < nb0; ++i)					if (__put_user(rptr[i], addr+i))						return -EFAULT;			}		}		return 1;	}	offset = 0;	if (nb < 4) {		/* read/write the least significant bits */		data.l = 0;		offset = 4 - nb;	}	/* Verify the address of the operand */	if (user_mode(regs)) {		if (verify_area((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))			return -EFAULT;	/* bad address */	}	if (flags & F) {		preempt_disable();		if (regs->msr & MSR_FP)			giveup_fpu(current);		preempt_enable();	}	/* If we read the operand, copy it in, else get register values */	if (flags & LD) {		for (i = 0; i < nb; ++i)			if (__get_user(data.v[offset+i], addr+i))				return -EFAULT;	} else if (flags & F) {		data.d = current->thread.fpr[reg];	} else {		data.l = regs->gpr[reg];	}	switch (flags & ~U) {	case LD+SE:	/* sign extend */		if (data.v[2] >= 0x80)			data.v[0] = data.v[1] = -1;		break;	case LD+S:	/* byte-swap */	case ST+S:		if (nb == 2) {			SWAP(data.v[2], data.v[3]);		} else {			SWAP(data.v[0], data.v[3]);			SWAP(data.v[1], data.v[2]);		}		break;	/* Single-precision FP load and store require conversions... */	case LD+F+S:		preempt_disable();		enable_kernel_fp();		cvt_fd(&data.f, &data.d, &current->thread.fpscr);		preempt_enable();		break;	case ST+F+S:		preempt_disable();		enable_kernel_fp();		cvt_df(&data.d, &data.f, &current->thread.fpscr);		preempt_enable();		break;	}	if (flags & ST) {		for (i = 0; i < nb; ++i)			if (__put_user(data.v[offset+i], addr+i))				return -EFAULT;	} else if (flags & F) {		current->thread.fpr[reg] = data.d;	} else {		regs->gpr[reg] = data.l;	}	if (flags & U)		regs->gpr[areg] = regs->dar;	return 1;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -