process.c
来自「h内核」· C语言 代码 · 共 669 行 · 第 1/2 页
C
669 行
/* * linux/arch/ppc64/kernel/process.c * * Derived from "arch/i386/kernel/process.c" * Copyright (C) 1995 Linus Torvalds * * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and * Paul Mackerras (paulus@cs.anu.edu.au) * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/config.h>#include <linux/module.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/smp.h>#include <linux/smp_lock.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/slab.h>#include <linux/user.h>#include <linux/elf.h>#include <linux/init.h>#include <linux/init_task.h>#include <linux/prctl.h>#include <linux/ptrace.h>#include <linux/kallsyms.h>#include <linux/interrupt.h>#include <linux/utsname.h>#include <asm/pgtable.h>#include <asm/uaccess.h>#include <asm/system.h>#include <asm/io.h>#include <asm/processor.h>#include <asm/mmu.h>#include <asm/mmu_context.h>#include <asm/prom.h>#include <asm/ppcdebug.h>#include <asm/machdep.h>#include <asm/iSeries/HvCallHpt.h>#include <asm/cputable.h>#include <asm/sections.h>#include <asm/tlbflush.h>#ifndef CONFIG_SMPstruct task_struct *last_task_used_math = NULL;struct task_struct *last_task_used_altivec = NULL;#endifstruct mm_struct ioremap_mm = { .pgd = ioremap_dir, .mm_users = ATOMIC_INIT(2), .mm_count = ATOMIC_INIT(1), .cpu_vm_mask = CPU_MASK_ALL, .page_table_lock = SPIN_LOCK_UNLOCKED,};/* * Make sure the floating-point register state in the * the thread_struct is up to date for task tsk. */void flush_fp_to_thread(struct task_struct *tsk){ if (tsk->thread.regs) { /* * We need to disable preemption here because if we didn't, * another process could get scheduled after the regs->msr * test but before we have finished saving the FP registers * to the thread_struct. That process could take over the * FPU, and then when we get scheduled again we would store * bogus values for the remaining FP registers. */ preempt_disable(); if (tsk->thread.regs->msr & MSR_FP) {#ifdef CONFIG_SMP /* * This should only ever be called for current or * for a stopped child process. Since we save away * the FP register state on context switch on SMP, * there is something wrong if a stopped child appears * to still have its FP state in the CPU registers. */ BUG_ON(tsk != current);#endif giveup_fpu(current); } preempt_enable(); }}void enable_kernel_fp(void){ WARN_ON(preemptible());#ifdef CONFIG_SMP if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) giveup_fpu(current); else giveup_fpu(NULL); /* just enables FP for kernel */#else giveup_fpu(last_task_used_math);#endif /* CONFIG_SMP */}EXPORT_SYMBOL(enable_kernel_fp);int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs){ if (!tsk->thread.regs) return 0; flush_fp_to_thread(current); memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs)); return 1;}#ifdef CONFIG_ALTIVECvoid enable_kernel_altivec(void){ WARN_ON(preemptible());#ifdef CONFIG_SMP if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) giveup_altivec(current); else giveup_altivec(NULL); /* just enables FP for kernel */#else giveup_altivec(last_task_used_altivec);#endif /* CONFIG_SMP */}EXPORT_SYMBOL(enable_kernel_altivec);/* * Make sure the VMX/Altivec register state in the * the thread_struct is up to date for task tsk. */void flush_altivec_to_thread(struct task_struct *tsk){ if (tsk->thread.regs) { preempt_disable(); if (tsk->thread.regs->msr & MSR_VEC) {#ifdef CONFIG_SMP BUG_ON(tsk != current);#endif giveup_altivec(current); } preempt_enable(); }}int dump_task_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs){ flush_altivec_to_thread(current); memcpy(vrregs, ¤t->thread.vr[0], sizeof(*vrregs)); return 1;}#endif /* CONFIG_ALTIVEC */struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *new){ struct thread_struct *new_thread, *old_thread; unsigned long flags; struct task_struct *last;#ifdef CONFIG_SMP /* avoid complexity of lazy save/restore of fpu * by just saving it every time we switch out if * this task used the fpu during the last quantum. * * If it tries to use the fpu again, it'll trap and * reload its fp regs. So we don't have to do a restore * every switch, just a save. * -- Cort */ if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP)) giveup_fpu(prev);#ifdef CONFIG_ALTIVEC if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC)) giveup_altivec(prev);#endif /* CONFIG_ALTIVEC */#endif /* CONFIG_SMP */#if defined(CONFIG_ALTIVEC) && !defined(CONFIG_SMP) /* Avoid the trap. On smp this this never happens since * we don't set last_task_used_altivec -- Cort */ if (new->thread.regs && last_task_used_altivec == new) new->thread.regs->msr |= MSR_VEC;#endif /* CONFIG_ALTIVEC */ flush_tlb_pending(); new_thread = &new->thread; old_thread = ¤t->thread; local_irq_save(flags); last = _switch(old_thread, new_thread); local_irq_restore(flags); return last;}static int instructions_to_print = 16;static void show_instructions(struct pt_regs *regs){ int i; unsigned long pc = regs->nip - (instructions_to_print * 3 / 4 * sizeof(int)); printk("Instruction dump:"); for (i = 0; i < instructions_to_print; i++) { int instr; if (!(i % 8)) printk("\n"); if (((REGION_ID(pc) != KERNEL_REGION_ID) && (REGION_ID(pc) != VMALLOC_REGION_ID)) || __get_user(instr, (unsigned int *)pc)) { printk("XXXXXXXX "); } else { if (regs->nip == pc) printk("<%08x> ", instr); else printk("%08x ", instr); } pc += sizeof(int); } printk("\n");}void show_regs(struct pt_regs * regs){ int i; unsigned long trap; printk("NIP: %016lX XER: %08X LR: %016lX CTR: %016lX\n", regs->nip, (unsigned int)regs->xer, regs->link, regs->ctr); printk("REGS: %p TRAP: %04lx %s (%s)\n", regs, regs->trap, print_tainted(), system_utsname.release); printk("MSR: %016lx EE: %01x PR: %01x FP: %01x ME: %01x " "IR/DR: %01x%01x CR: %08X\n", regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, regs->msr&MSR_IR ? 1 : 0, regs->msr&MSR_DR ? 1 : 0, (unsigned int)regs->ccr); trap = TRAP(regs); printk("DAR: %016lx DSISR: %016lx\n", regs->dar, regs->dsisr); printk("TASK: %p[%d] '%s' THREAD: %p", current, current->pid, current->comm, current->thread_info);#ifdef CONFIG_SMP printk(" CPU: %d", smp_processor_id());#endif /* CONFIG_SMP */ for (i = 0; i < 32; i++) { if ((i % 4) == 0) { printk("\n" KERN_INFO "GPR%02d: ", i); } printk("%016lX ", regs->gpr[i]); if (i == 13 && !FULL_REGS(regs)) break; } printk("\n"); /* * Lookup NIP late so we have the best change of getting the * above info out without failing */ printk("NIP [%016lx] ", regs->nip); print_symbol("%s\n", regs->nip); printk("LR [%016lx] ", regs->link); print_symbol("%s\n", regs->link); show_stack(current, (unsigned long *)regs->gpr[1]); if (!user_mode(regs)) show_instructions(regs);}void exit_thread(void){#ifndef CONFIG_SMP if (last_task_used_math == current) last_task_used_math = NULL;#ifdef CONFIG_ALTIVEC if (last_task_used_altivec == current) last_task_used_altivec = NULL;#endif /* CONFIG_ALTIVEC */#endif /* CONFIG_SMP */}void flush_thread(void){ struct thread_info *t = current_thread_info(); if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);#ifndef CONFIG_SMP if (last_task_used_math == current) last_task_used_math = NULL;#ifdef CONFIG_ALTIVEC if (last_task_used_altivec == current) last_task_used_altivec = NULL;#endif /* CONFIG_ALTIVEC */#endif /* CONFIG_SMP */}voidrelease_thread(struct task_struct *t){}/* * This gets called before we allocate a new thread and copy * the current task into it.
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?