fet120_adc10_08.s43

The MSP430 code examples are provided for demonstration purposes only.

;******************************************************************************
;   MSP-FET430P120 Demo - ADC10, DTC Sample A0 64x, 1.5V, Repeat Single, DCO
;
;   Description: Use DTC to sample A0 64 times with reference to internal 1.5v.
;   Vref Software writes to ADC10SC to trigger sample burst. In Mainloop MSP430
;   waits in LPM0 to save power until ADC10 conversion complete, ADC10_ISR(DTC)
;   will force exit from any LPMx in Mainloop on reti. ADC10 internal
;   oscillator times sample period (16x) and conversion (13x). DTC transfers
;   conversion code to RAM 200h - 280h. P1.0 set at start of conversion burst,
;   reset on completion.
;   //* MSP430F1232 or MSP430F1132 Device Required *//
;
;                MSP430F1232
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;        >---|A0           P1.0|-->LED
;
;   M. Buccini
;   Texas Instruments Inc.
;   Feb 2005
;   Built with IAR Embedded Workbench Version: 3.21A
;******************************************************************************
#include  <msp430x12x2.h>
;------------------------------------------------------------------------------
            ORG     0E000h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #0300h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupADC10  mov.w   #CONSEQ_2,&ADC10CTL1    ; Repeat single channel
            mov.w   #SREF_1+ADC10SHT_2+MSC+REFON+ADC10ON+ADC10IE,&ADC10CTL0;
            mov.w   #30,&TACCR0             ; Delay to allow Ref to settle
            bis.w   #CCIE,&TACCTL0          ; Compare-mode interrupt.
            mov.w   #TACLR+MC_1+TASSEL_2,&TACTL; up mode, SMCLK
            bis.w   #LPM0+GIE,SR            ; Enter LPM0, enable interrupts
            bic.w   #CCIE,&TACCTL0          ; Disable timer interrupt
            dint                            ; Disable Interrupts
            mov.b   #040h,&ADC10DTC1        ; 64 conversions
            bis.b   #01h,&ADC10AE           ; P2.0 ADC option select
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;
Mainloop    bic.w   #ENC,&ADC10CTL0         ;
busy_test   bit     #BUSY,&ADC10CTL1        ; ADC10 core inactive?
            jnz     busy_test               ;
            mov.w   #0200h,&ADC10SA         ; Data buffer start
            bis.b   #001h,&P1OUT            ; P1.0 = 1
            bis.w   #ENC+ADC10SC,&ADC10CTL0 ; Start sampling
            bis.w   #CPUOFF+GIE,SR          ; LPM0, ADC10_ISR will force exit
            bic.b   #001h,&P1OUT            ; P1.0 = 0
            jmp     Mainloop                ; Again
                                            ;
;------------------------------------------------------------------------------
TA0_ISR;    ISR for CCR0
;------------------------------------------------------------------------------
            clr     &TACTL                  ; clear Timer_A control registers
            bic     #LPM0,0(SP)             ; Exit LPMx, interrupts enabled
            reti                            ;
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
ADC10_ISR;
;------------------------------------------------------------------------------
            mov.w   #GIE,0(SP)              ; Exit any LPMx on reti
            reti                            ;		
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFEAh                  ; ADC10 Vector
            DW      ADC10_ISR               ;
            ORG     0FFF2h                  ; Timer_A0 Vector
            DW      TA0_ISR                 ;
            END