fet120_wdt_03.s43

The MSP430 code examples are provided for demonstration purposes only.

;******************************************************************************
;   MSP-FET430P120 Demo - WDT, Toggle P1.0, Interval Overflow ISR, HF XTAL ACLK
;
;   Description: Toggle P1.0 using software timed by the WDT ISR. In this
;   example the WDT is clocked with ACLK which is the same as the XTAL and
;   divided by the WDT by 512 triggering and ISR that will toggle P1.0.
;   ACLK = MCLK = LFXT1 = HF XTAL
;   //* HF XTAL REQUIRED AND NOT INSTALLED ON FET *//
;   //* Min Vcc required varies with MCLK frequency - refer to datasheet *//	
;
;                MSP430F123(2)
;             -----------------
;         /|\|              XIN|-
;          | |                 | HF XTAL (455k - 8Mhz)
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   M. Buccini
;   Texas Instruments Inc.
;   Feb 2005
;   Built with IAR Embedded Workbench Version: 3.21A
;******************************************************************************
#include  <msp430x12x2.h>
;------------------------------------------------------------------------------
            ORG     0E000h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #300h,SP                ; Initialize stackpointer
SetupWDT    mov.w   #WDT_ADLY_16,&WDTCTL    ; ACLK / 512, interval timer
SetupBC     bis.b   #XTS,&BCSCTL1           ; LFXT1 = HF XTAL
SetupOsc    bic.b   #OFIFG,&IFG1            ; Clear OSC fault flag
            mov.w   #0FFh,R15               ; R15 = Delay
SetupOsc1   dec.w   R15                     ; Additional delay to ensure start
            jnz     SetupOsc1               ;
            bit.b   #OFIFG,&IFG1            ; OSC fault flag set?
            jnz     SetupOsc                ; OSC Fault, clear flag again
            bis.b   #SELM_3,&BCSCTL2        ; MCLK = LFXT1
            bis.b   #WDTIE,&IE1             ; Enable WDT interrupt
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;				
Mainloop    bis.w   #LPM0+GIE,SR            ; Enter LPM0, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;------------------------------------------------------------------------------
WDT_ISR;    Toggle P1.0
;------------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ;		
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFF4h                  ; WDT Vector
            DW      WDT_ISR                 ;
            END