system_mk10n512md100.c

K10的GPIO库函数之实现LED灯亮灭

/*
** ###################################################################
**     Processor:           MK10N512MD100
**     Compilers:           ARM Compiler
**                          Freescale C/C++ for Embedded ARM
**                          GNU ARM C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**     Reference manual:    K10P144M100SF2RM, Rev. 3, 4 Nov 2010
**     Version:             rev. 1.6, 2011-01-14
**
**     Abstract:
**         Provides a system configuration function and a global variable that contains the system frequency.
**         It configures the device and initializes the oscillator (PLL) that is part of the microcontroller device.
**
**     Copyright: 2011 Freescale Semiconductor, Inc. All Rights Reserved.
**
**     http:                 www.freescale.com
**     mail:                 [e-mail]
**
**     Revisions:
**     - rev. 0.1 (2010-09-29)
**         Initial version
**     - rev. 1.0 (2010-10-15)
**         First public version
**     - rev. 1.1 (2010-10-27)
**         Registers updated according to the new reference manual revision - Rev. 2, 15 Oct 2010
**         ADC - Peripheral register PGA bit definition has been fixed, bits PGALP, PGACHP removed.
**         CAN - Peripheral register MCR bit definition has been fixed, bit WAKSRC removed.
**         CRC - Peripheral register layout structure has been extended with 8/16-bit access to shadow registers.
**         CMP - Peripheral base address macro renamed from HSCMPx_BASE to CMPx_BASE.
**         CMP - Peripheral base pointer macro renamed from HSCMPx to CMPx.
**         DMA - Peripheral base address macro renamed from eDMA_BASE to DMA_BASE.
**         DMA - Peripheral base pointer macro renamed from eDMA to DMA.
**         GPIO - Port Output Enable Register (POER) has been renamed to Port Data Direction Register (PDDR), all POER related macros fixed to PDDR.
**         PDB - Peripheral register layout structure has been extended for Channel n and DAC n register array access (#MTWX44115).
**         RFSYS - System regfile registers have been added (#MTWX43999)
**         RFVBAT - VBAT  regfile registers have been added (#MTWX43999)
**         RTC - Peripheral register CR bit definition has been fixed, bit OTE removed.
**         TSI - Peripheral registers STATUS, SCANC bit definition have been fixed, bit groups CAPTRM, DELVOL and AMCLKDIV added.
**         VREF - Peripheral register TRM removed.
**     - rev. 1.2 (2010-11-11)
**         Registers updated according to the new reference manual revision - Rev. 3, 4 Nov 2010
**         CAN - Individual Matching Element Update (IMEU) feature has been removed.
**         CAN - Peripheral register layout structure has been fixed, registers IMEUR, LRFR have been removed.
**         CAN - Peripheral register CTRL2 bit definition has been fixed, bits IMEUMASK, LOSTRMMSK, LOSTRLMSK, IMEUEN have been removed.
**         CAN - Peripheral register ESR2 bit definition has been fixed, bits IMEUF, LOSTRMF, LOSTRLF have been removed.
**         NV - Fixed offset address of BACKKEYx, FPROTx registers.
**         TSI - Peripheral register layout structure has been fixed, register WUCNTR has been removed.
**     - rev. 1.3 (2010-11-19)
**         CAN - Support for CAN0_IMEU_IRQn, CAN0_Lost_Rx_IRQn interrupts has been removed.
**         CAN - Support for CAN1_IMEU_IRQn, CAN1_Lost_Rx_IRQn interrupts has been removed.
**     - rev. 1.4 (2010-11-30)
**         EWM - Peripheral base address EWM_BASE definition has been fixed from 0x4005F000u to 0x40061000u (#MTWX44776).
**     - rev. 1.5 (2010-12-17)
**         AIPS0, AIPS1 - Fixed offset of PACRE-PACRP registers (#MTWX45259).
**     - rev. 1.6 (2011-01-14)
**         Added BITBAND_REG() macro to provide access to register bits using bit band region.
**
** ###################################################################
*/

/*! \file MK10N512MD100 */
/*! \version 1.6 */
/*! \date 2011-01-14 */
/*! \brief Device specific configuration file for MK10N512MD100 (implementation file) */
/*! \detailed Provides a system configuration function and a global variable that contains the system frequency.
      It configures the device and initializes the oscillator (PLL) that is part of the microcontroller device. */

#include <stdint.h>
#include "MK10N512MD100.h"

#define DISABLE_WDOG    1

#define CLOCK_SETUP     0
/* Predefined clock setups
   0 ... Multipurpose Clock Generator (MCG) in FLL Engaged Internal (FEI) mode
         Core clock/Bus clock derived from an internal clock source 32.768kHz
         Core clock = 47.97MHz, BusClock = 47.97MHz
   1 ... Multipurpose Clock Generator (MCG) in PLL Engaged External (PEE} mode
         Clock derived from and external crystal 8MHz
         Core clock = 48MHz, BusClock = 48MHz
   2 ... Multipurpose Clock Generator (MCG) in Bypassed Low Power External (BLPE) mode
         Core clock/Bus clock derived directly from external crystal with no multiplication
         Core clock = 8MHz, BusClock = 8MHz
*/

/*----------------------------------------------------------------------------
  Define clock source values
 *----------------------------------------------------------------------------*/
#if (CLOCK_SETUP == 0)
  #define CPU_XTAL_CLK_HZ                 4000000u /* Value of the external crystal or oscillator clock frequency in Hz */
  #define CPU_XTAL32k_CLK_HZ              32768u   /* Value of the external 32k crystal or oscillator clock frequency in Hz */
  #define CPU_INT_SLOW_CLK_HZ             32768u   /* Value of the slow internal oscillator clock frequency in Hz  */
  #define CPU_INT_FAST_CLK_HZ             4000000u /* Value of the fast internal oscillator clock frequency in Hz  */
  #define DEFAULT_SYSTEM_CLOCK            47972352u /* Default System clock value */
#elif (CLOCK_SETUP == 1)
  #define CPU_XTAL_CLK_HZ                 8000000u /* Value of the external crystal or oscillator clock frequency in Hz */
  #define CPU_XTAL32k_CLK_HZ              32768u   /* Value of the external 32k crystal or oscillator clock frequency in Hz */
  #define CPU_INT_SLOW_CLK_HZ             32768u   /* Value of the slow internal oscillator clock frequency in Hz  */
  #define CPU_INT_FAST_CLK_HZ             4000000u /* Value of the fast internal oscillator clock frequency in Hz  */
  #define DEFAULT_SYSTEM_CLOCK            48000000u /* Default System clock value */
#elif (CLOCK_SETUP == 2)
  #define CPU_XTAL_CLK_HZ                 8000000u /* Value of the external crystal or oscillator clock frequency in Hz */
  #define CPU_XTAL32k_CLK_HZ              32768u   /* Value of the external 32k crystal or oscillator clock frequency in Hz */
  #define CPU_INT_SLOW_CLK_HZ             32768u   /* Value of the slow internal oscillator clock frequency in Hz  */
  #define CPU_INT_FAST_CLK_HZ             4000000u /* Value of the fast internal oscillator clock frequency in Hz  */
  #define DEFAULT_SYSTEM_CLOCK            8000000u /* Default System clock value */
#endif /* (CLOCK_SETUP == 2) */


/* ----------------------------------------------------------------------------
   -- Core clock
   ---------------------------------------------------------------------------- */

uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;

/* ----------------------------------------------------------------------------
   -- SystemInit()
   ---------------------------------------------------------------------------- */

void SystemInit (void) {
#if (DISABLE_WDOG)
  /* Disable the WDOG module */
  /* WDOG_UNLOCK: WDOGUNLOCK=0xC520 */
  WDOG->UNLOCK = (uint16_t)0xC520u;     /* Key 1 */
  /* WDOG_UNLOCK : WDOGUNLOCK=0xD928 */
  WDOG->UNLOCK  = (uint16_t)0xD928u;    /* Key 2 */
  /* WDOG_STCTRLH: ??=0,DISTESTWDOG=0,BYTESEL=0,TESTSEL=0,TESTWDOG=0,??=0,STNDBYEN=1,WAITEN=1,STOPEN=1,DBGEN=0,ALLOWUPDATE=1,WINEN=0,IRQRSTEN=0,CLKSRC=1,WDOGEN=0 */
  WDOG->STCTRLH = (uint16_t)0x01D2u;
#endif /* (DISABLE_WDOG) */

  /* System clock initialization */
#if (CLOCK_SETUP == 0)
  /* Switch to FEI Mode */
  /* MCG->C1: CLKS=0,FRDIV=0,IREFS=1,IRCLKEN=1,IREFSTEN=0 */
  MCG->C1 = (uint8_t)0x06u;
  /* MCG->C2: ??=0,??=0,RANGE=0,HGO=0,EREFS=0,LP=0,IRCS=0 */
  MCG->C2 = (uint8_t)0x00u;
  /* MCG_C4: DMX32=1,DRST_DRS=1 */
  MCG->C4 = (uint8_t)((MCG->C4 & (uint8_t)~(uint8_t)0x40u) | (uint8_t)0xA0u);
  /* MCG->C5: ??=0,PLLCLKEN=0,PLLSTEN=0,PRDIV=0 */
  MCG->C5 = (uint8_t)0x00u;
  /* MCG->C6: LOLIE=0,PLLS=0,CME=0,VDIV=0 */
  MCG->C6 = (uint8_t)0x00u;
  while((MCG->S & MCG_S_IREFST_MASK) == 0u) { /* Check that the source of the FLL reference clock is the internal reference clock. */
  }
  while((MCG->S & 0x0Cu) != 0x00u) {    /* Wait until output of the FLL is selected */
  }
  /* SIM->CLKDIV1: OUTDIV1=0,OUTDIV2=0,OUTDIV3=1,OUTDIV4=1,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0,??=0 */
  SIM->CLKDIV1 = (uint32_t)0x00110000u; /* Update system prescalers */
#elif (CLOCK_SETUP == 1)
  /* Switch to FBE Mode */
  /* OSC->CR: ERCLKEN=0,??=0,EREFSTEN=0,??=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */