📄 if_dereg.h
字号:
/* * Copyright (c) 1982, 1986 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)if_dereg.h 7.3 (Berkeley) 6/28/90 *//* * DEC DEUNA interface */struct dedevice { union { short p0_w; char p0_b[2]; } u_p0;#define pcsr0 u_p0.p0_w#define pclow u_p0.p0_b[0]#define pchigh u_p0.p0_b[1] short pcsr1; short pcsr2; short pcsr3;};/* * PCSR 0 bit descriptions */#define PCSR0_SERI 0x8000 /* Status error interrupt */#define PCSR0_PCEI 0x4000 /* Port command error interrupt */#define PCSR0_RXI 0x2000 /* Receive done interrupt */#define PCSR0_TXI 0x1000 /* Transmit done interrupt */#define PCSR0_DNI 0x0800 /* Done interrupt */#define PCSR0_RCBI 0x0400 /* Receive buffer unavail intrpt */#define PCSR0_FATI 0x0100 /* Fatal error interrupt */#define PCSR0_INTR 0x0080 /* Interrupt summary */#define PCSR0_INTE 0x0040 /* Interrupt enable */#define PCSR0_RSET 0x0020 /* DEUNA reset */#define PCSR0_CMASK 0x000f /* command mask */#define PCSR0_BITS "\20\20SERI\17PCEI\16RXI\15TXI\14DNI\13RCBI\11FATI\10INTR\7INTE\6RSET"/* bits 0-3 are for the PORT_COMMAND */#define CMD_NOOP 0x0#define CMD_GETPCBB 0x1 /* Get PCB Block */#define CMD_GETCMD 0x2 /* Execute command in PCB */#define CMD_STEST 0x3 /* Self test mode */#define CMD_START 0x4 /* Reset xmit and receive ring ptrs */#define CMD_BOOT 0x5 /* Boot DEUNA */#define CMD_PDMD 0x8 /* Polling demand */#define CMD_TMRO 0x9 /* Sanity timer on */#define CMD_TMRF 0xa /* Sanity timer off */#define CMD_RSTT 0xb /* Reset sanity timer */#define CMD_STOP 0xf /* Suspend operation *//* * PCSR 1 bit descriptions */#define PCSR1_XPWR 0x8000 /* Transceiver power BAD */#define PCSR1_ICAB 0x4000 /* Interconnect cabling BAD */#define PCSR1_STCODE 0x3f00 /* Self test error code */#define PCSR1_PCTO 0x0080 /* Port command timed out */#define PCSR1_ILLINT 0x0040 /* Illegal interrupt */#define PCSR1_TIMEOUT 0x0020 /* Timeout */#define PCSR1_POWER 0x0010 /* Power fail */#define PCSR1_RMTC 0x0008 /* Remote console reserved */#define PCSR1_STMASK 0x0007 /* State *//* bit 0-3 are for STATE */#define STAT_RESET 0x0#define STAT_PRIMLD 0x1 /* Primary load */#define STAT_READY 0x2#define STAT_RUN 0x3#define STAT_UHALT 0x5 /* UNIBUS halted */#define STAT_NIHALT 0x6 /* NI halted */#define STAT_NIUHALT 0x7 /* NI and UNIBUS Halted */#define PCSR1_BITS "\20\20XPWR\17ICAB\10PCTO\7ILLINT\6TIMEOUT\5POWER\4RMTC"/* * Port Control Block Base */struct de_pcbb { short pcbb0; /* function */ short pcbb2; /* command specific */ short pcbb4; short pcbb6;};/* PCBB function codes */#define FC_NOOP 0x00 /* NO-OP */#define FC_LSUADDR 0x01 /* Load and start microaddress */#define FC_RDDEFAULT 0x02 /* Read default physical address */#define FC_RDPHYAD 0x04 /* Read physical address */#define FC_WTPHYAD 0x05 /* Write physical address */#define FC_RDMULTI 0x06 /* Read multicast address list */#define FC_WTMULTI 0x07 /* Read multicast address list */#define FC_RDRING 0x08 /* Read ring format */#define FC_WTRING 0x09 /* Write ring format */#define FC_RDCNTS 0x0a /* Read counters */#define FC_RCCNTS 0x0b /* Read and clear counters */#define FC_RDMODE 0x0c /* Read mode */#define FC_WTMODE 0x0d /* Write mode */#define FC_RDSTATUS 0x0e /* Read port status */#define FC_RCSTATUS 0x0f /* Read and clear port status */#define FC_DUMPMEM 0x10 /* Dump internal memory */#define FC_LOADMEM 0x11 /* Load internal memory */#define FC_RDSYSID 0x12 /* Read system ID parameters */#define FC_WTSYSID 0x13 /* Write system ID parameters */#define FC_RDSERAD 0x14 /* Read load server address */#define FC_WTSERAD 0x15 /* Write load server address *//* * Unibus Data Block Base (UDBB) for ring buffers */struct de_udbbuf { short b_tdrbl; /* Transmit desc ring base low 16 bits */ char b_tdrbh; /* Transmit desc ring base high 2 bits */ char b_telen; /* Length of each transmit entry */ short b_trlen; /* Number of entries in the XMIT desc ring */ short b_rdrbl; /* Receive desc ring base low 16 bits */ char b_rdrbh; /* Receive desc ring base high 2 bits */ char b_relen; /* Length of each receive entry */ short b_rrlen; /* Number of entries in the RECV desc ring */};/* * Transmit/Receive Ring Entry */struct de_ring { short r_slen; /* Segment length */ short r_segbl; /* Segment address (low 16 bits) */ char r_segbh; /* Segment address (hi 2 bits) */ u_char r_flags; /* Status flags */ u_short r_tdrerr; /* Errors */#define r_lenerr r_tdrerr short r_rid; /* Request ID */};#define XFLG_OWN 0x80 /* If 0 then owned by driver */#define XFLG_ERRS 0x40 /* Error summary */#define XFLG_MTCH 0x20 /* Address match on xmit request */#define XFLG_MORE 0x10 /* More than one entry required */#define XFLG_ONE 0x08 /* One collision encountered */#define XFLG_DEF 0x04 /* Transmit deferred */#define XFLG_STP 0x02 /* Start of packet */#define XFLG_ENP 0x01 /* End of packet */#define XFLG_BITS "\10\10OWN\7ERRS\6MTCH\5MORE\4ONE\3DEF\2STP\1ENP"#define XERR_BUFL 0x8000 /* Buffer length error */#define XERR_UBTO 0x4000 /* UNIBUS tiemout#define XERR_LCOL 0x1000 /* Late collision */#define XERR_LCAR 0x0800 /* Loss of carrier */#define XERR_RTRY 0x0400 /* Failed after 16 retries */#define XERR_TDR 0x03ff /* TDR value */#define XERR_BITS "\20\20BUFL\17UBTO\15LCOL\14LCAR\13RTRY"#define RFLG_OWN 0x80 /* If 0 then owned by driver */#define RFLG_ERRS 0x40 /* Error summary */#define RFLG_FRAM 0x20 /* Framing error */#define RFLG_OFLO 0x10 /* Message overflow */#define RFLG_CRC 0x08 /* CRC error */#define RFLG_STP 0x02 /* Start of packet */#define RFLG_ENP 0x01 /* End of packet */#define RFLG_BITS "\10\10OWN\7ERRS\6FRAM\5OFLO\4CRC\2STP\1ENP"#define RERR_BUFL 0x8000 /* Buffer length error */#define RERR_UBTO 0x4000 /* UNIBUS tiemout */#define RERR_NCHN 0x2000 /* No data chaining */#define RERR_MLEN 0x0fff /* Message length */#define RERR_BITS "\20\20BUFL\17UBTO\16NCHN"/* mode description bits */#define MOD_HDX 0x0001 /* Half duplex mode */#define MOD_LOOP 0x0004 /* Enable internal loopback */#define MOD_DTCR 0x0008 /* Disables CRC generation */#define MOD_DMNT 0x0200 /* Disable maintenance features */#define MOD_ECT 0x0400 /* Enable collision test */#define MOD_TPAD 0x1000 /* Transmit message pad enable */#define MOD_DRDC 0x2000 /* Disable data chaining */#define MOD_ENAL 0x4000 /* Enable all multicast */#define MOD_PROM 0x8000 /* Enable promiscuous mode */struct de_buf { struct ether_header db_head; /* header */ char db_data[ETHERMTU]; /* packet data */ int db_crc; /* CRC - on receive only */};
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -