channel.h

Asterisk-1.4.4最新内核源代码

   none or a subset of those features, and you should not count on this if you want your
   asterisk application to be portable.  They're mainly useful for tweaking performance */

/*! Sets an option on a channel */
/*! 
 * \param channel channel to set options on
 * \param option option to change
 * \param data data specific to option
 * \param datalen length of the data
 * \param block blocking or not
 * Set an option on a channel (see frame.h), optionally blocking awaiting the reply 
 * Returns 0 on success and -1 on failure
 */
int ast_channel_setoption(struct ast_channel *channel, int option, void *data, int datalen, int block);

/*! Pick the best codec  */
/* Choose the best codec...  Uhhh...   Yah. */
int ast_best_codec(int fmts);


/*! Checks the value of an option */
/*! 
 * Query the value of an option, optionally blocking until a reply is received
 * Works similarly to setoption except only reads the options.
 */
struct ast_frame *ast_channel_queryoption(struct ast_channel *channel, int option, void *data, int *datalen, int block);

/*! Checks for HTML support on a channel */
/*! Returns 0 if channel does not support HTML or non-zero if it does */
int ast_channel_supports_html(struct ast_channel *channel);

/*! Sends HTML on given channel */
/*! Send HTML or URL on link.  Returns 0 on success or -1 on failure */
int ast_channel_sendhtml(struct ast_channel *channel, int subclass, const char *data, int datalen);

/*! Sends a URL on a given link */
/*! Send URL on link.  Returns 0 on success or -1 on failure */
int ast_channel_sendurl(struct ast_channel *channel, const char *url);

/*! Defers DTMF */
/*! Defer DTMF so that you only read things like hangups and audio.  Returns
   non-zero if channel was already DTMF-deferred or 0 if channel is just now
   being DTMF-deferred */
int ast_channel_defer_dtmf(struct ast_channel *chan);

/*! Undeos a defer */
/*! Undo defer.  ast_read will return any dtmf characters that were queued */
void ast_channel_undefer_dtmf(struct ast_channel *chan);

/*! Initiate system shutdown -- prevents new channels from being allocated.
    If "hangup" is non-zero, all existing channels will receive soft
     hangups */
void ast_begin_shutdown(int hangup);

/*! Cancels an existing shutdown and returns to normal operation */
void ast_cancel_shutdown(void);

/*! Returns number of active/allocated channels */
int ast_active_channels(void);

/*! Returns non-zero if Asterisk is being shut down */
int ast_shutting_down(void);

/*! Activate a given generator */
int ast_activate_generator(struct ast_channel *chan, struct ast_generator *gen, void *params);

/*! Deactive an active generator */
void ast_deactivate_generator(struct ast_channel *chan);

void ast_set_callerid(struct ast_channel *chan, const char *cidnum, const char *cidname, const char *ani);


/*! return a mallocd string with the result of sprintf of the fmt and following args */
char *ast_safe_string_alloc(const char *fmt, ...);



/*! Start a tone going */
int ast_tonepair_start(struct ast_channel *chan, int freq1, int freq2, int duration, int vol);
/*! Stop a tone from playing */
void ast_tonepair_stop(struct ast_channel *chan);
/*! Play a tone pair for a given amount of time */
int ast_tonepair(struct ast_channel *chan, int freq1, int freq2, int duration, int vol);

/*!
 * \brief Automatically service a channel for us... 
 *
 * \retval 0 success
 * \retval -1 failure, or the channel is already being autoserviced
 */
int ast_autoservice_start(struct ast_channel *chan);

/*! 
 * \brief Stop servicing a channel for us...  
 *
 * \retval 0 success
 * \retval -1 error, or the channel has been hungup 
 */
int ast_autoservice_stop(struct ast_channel *chan);

/* If built with zaptel optimizations, force a scheduled expiration on the
   timer fd, at which point we call the callback function / data */
int ast_settimeout(struct ast_channel *c, int samples, int (*func)(void *data), void *data);

/*!	\brief Transfer a channel (if supported).  Returns -1 on error, 0 if not supported
   and 1 if supported and requested 
	\param chan current channel
	\param dest destination extension for transfer
*/
int ast_transfer(struct ast_channel *chan, char *dest);

/*!	\brief  Start masquerading a channel
	XXX This is a seriously wacked out operation.  We're essentially putting the guts of
           the clone channel into the original channel.  Start by killing off the original
           channel's backend.   I'm not sure we're going to keep this function, because
           while the features are nice, the cost is very high in terms of pure nastiness. XXX
	\param chan 	Channel to masquerade
*/
int ast_do_masquerade(struct ast_channel *chan);

/*!	\brief Find bridged channel 
	\param chan Current channel
*/
struct ast_channel *ast_bridged_channel(struct ast_channel *chan);

/*!
  \brief Inherits channel variable from parent to child channel
  \param parent Parent channel
  \param child Child channel

  Scans all channel variables in the parent channel, looking for those
  that should be copied into the child channel.
  Variables whose names begin with a single '_' are copied into the
  child channel with the prefix removed.
  Variables whose names begin with '__' are copied into the child
  channel with their names unchanged.
*/
void ast_channel_inherit_variables(const struct ast_channel *parent, struct ast_channel *child);

/*!
  \brief adds a list of channel variables to a channel
  \param chan the channel
  \param vars a linked list of variables

  Variable names can be for a regular channel variable or a dialplan function
  that has the ability to be written to.
*/
void ast_set_variables(struct ast_channel *chan, struct ast_variable *vars);

/*!
  \brief An opaque 'object' structure use by silence generators on channels.
 */
struct ast_silence_generator;

/*!
  \brief Starts a silence generator on the given channel.
  \param chan The channel to generate silence on
  \return An ast_silence_generator pointer, or NULL if an error occurs

  This function will cause SLINEAR silence to be generated on the supplied
  channel until it is disabled; if the channel cannot be put into SLINEAR
  mode then the function will fail.

  The pointer returned by this function must be preserved and passed to
  ast_channel_stop_silence_generator when you wish to stop the silence
  generation.
 */
struct ast_silence_generator *ast_channel_start_silence_generator(struct ast_channel *chan);

/*!
  \brief Stops a previously-started silence generator on the given channel.
  \param chan The channel to operate on
  \param state The ast_silence_generator pointer return by a previous call to
  ast_channel_start_silence_generator.
  \return nothing

  This function will stop the operating silence generator and return the channel
  to its previous write format.
 */
void ast_channel_stop_silence_generator(struct ast_channel *chan, struct ast_silence_generator *state);

/*!
  \brief Check if the channel can run in internal timing mode.
  \param chan The channel to check
  \return boolean

  This function will return 1 if internal timing is enabled and the timing
  device is available.
 */
int ast_internal_timing_enabled(struct ast_channel *chan);

/* Misc. functions below */

/*! \brief if fd is a valid descriptor, set *pfd with the descriptor
 * \return Return 1 (not -1!) if added, 0 otherwise (so we can add the
 * return value to the index into the array)
 */
static inline int ast_add_fd(struct pollfd *pfd, int fd)
{
	pfd->fd = fd;
	pfd->events = POLLIN | POLLPRI;
	return fd >= 0;
}

/*! \brief Helper function for migrating select to poll */
static inline int ast_fdisset(struct pollfd *pfds, int fd, int max, int *start)
{
	int x;
	int dummy=0;

	if (fd < 0)
		return 0;
	if (!start)
		start = &dummy;
	for (x = *start; x<max; x++)
		if (pfds[x].fd == fd) {
			if (x == *start)
				(*start)++;
			return pfds[x].revents;
		}
	return 0;
}

#ifdef SOLARIS
static inline void timersub(struct timeval *tvend, struct timeval *tvstart, struct timeval *tvdiff)
{
	tvdiff->tv_sec = tvend->tv_sec - tvstart->tv_sec;
	tvdiff->tv_usec = tvend->tv_usec - tvstart->tv_usec;
	if (tvdiff->tv_usec < 0) {
		tvdiff->tv_sec --;
		tvdiff->tv_usec += 1000000;
	}

}
#endif

/*! \brief Waits for activity on a group of channels 
 * \param nfds the maximum number of file descriptors in the sets
 * \param rfds file descriptors to check for read availability
 * \param wfds file descriptors to check for write availability
 * \param efds file descriptors to check for exceptions (OOB data)
 * \param tvp timeout while waiting for events
 * This is the same as a standard select(), except it guarantees the
 * behaviour where the passed struct timeval is updated with how much
 * time was not slept while waiting for the specified events
 */
static inline int ast_select(int nfds, fd_set *rfds, fd_set *wfds, fd_set *efds, struct timeval *tvp)
{
#ifdef __linux__
	return select(nfds, rfds, wfds, efds, tvp);
#else
	if (tvp) {
		struct timeval tv, tvstart, tvend, tvlen;
		int res;

		tv = *tvp;
		gettimeofday(&tvstart, NULL);
		res = select(nfds, rfds, wfds, efds, tvp);
		gettimeofday(&tvend, NULL);
		timersub(&tvend, &tvstart, &tvlen);
		timersub(&tv, &tvlen, tvp);
		if (tvp->tv_sec < 0 || (tvp->tv_sec == 0 && tvp->tv_usec < 0)) {
			tvp->tv_sec = 0;
			tvp->tv_usec = 0;
		}
		return res;
	}
	else
		return select(nfds, rfds, wfds, efds, NULL);
#endif
}

#ifdef DO_CRASH
#define CRASH do { fprintf(stderr, "!! Forcing immediate crash a-la abort !!\n"); *((int *)0) = 0; } while(0)
#else
#define CRASH do { } while(0)
#endif

#define CHECK_BLOCKING(c) do { 	 \
	if (ast_test_flag(c, AST_FLAG_BLOCKING)) {\
		if (option_debug) \
			ast_log(LOG_DEBUG, "Thread %ld Blocking '%s', already blocked by thread %ld in procedure %s\n", (long) pthread_self(), (c)->name, (long) (c)->blocker, (c)->blockproc); \
		CRASH; \
	} else { \
		(c)->blocker = pthread_self(); \
		(c)->blockproc = __PRETTY_FUNCTION__; \
		ast_set_flag(c, AST_FLAG_BLOCKING); \
	} } while (0)

ast_group_t ast_get_group(const char *s);

/*! \brief print call- and pickup groups into buffer */
char *ast_print_group(char *buf, int buflen, ast_group_t group);

/*! \brief Convert enum channelreloadreason to text string for manager event
	\param reason	Enum channelreloadreason - reason for reload (manager, cli, start etc)
*/
const char *channelreloadreason2txt(enum channelreloadreason reason);

/*! \brief return an ast_variable list of channeltypes */
struct ast_variable *ast_channeltype_list(void);

/*!
  \brief Begin 'whispering' onto a channel
  \param chan The channel to whisper onto
  \return 0 for success, non-zero for failure

  This function will add a whisper buffer onto a channel and set a flag
  causing writes to the channel to reduce the volume level of the written
  audio samples, and then to mix in audio from the whisper buffer if it
  is available.

  Note: This function performs no locking; you must hold the channel's lock before
  calling this function.
 */
int ast_channel_whisper_start(struct ast_channel *chan);

/*!
  \brief Feed an audio frame into the whisper buffer on a channel
  \param chan The channel to whisper onto
  \param f The frame to to whisper onto chan
  \return 0 for success, non-zero for failure
 */
int ast_channel_whisper_feed(struct ast_channel *chan, struct ast_frame *f);

/*!
  \brief Stop 'whispering' onto a channel
  \param chan The channel to whisper onto
  \return 0 for success, non-zero for failure

  Note: This function performs no locking; you must hold the channel's lock before
  calling this function.
 */
void ast_channel_whisper_stop(struct ast_channel *chan);

#if defined(__cplusplus) || defined(c_plusplus)
}
#endif

#endif /* _ASTERISK_CHANNEL_H */