dsp280x_defaultisr.c

DSP280X芯片的编程简单例子

{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;  

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT3.6
interrupt void EPWM6_INT_ISR(void)    // EPWM-6
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT3.7 - Reserved
// INT3.8 - Reserved


// -----------------------------------------------------------
// PIE Group 4 - MUXed into CPU INT4
// -----------------------------------------------------------

// INT 4.1
interrupt void ECAP1_INT_ISR(void)    // ECAP-1
{
  // Insert ISR Code here
  
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;  

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT4.2
interrupt void ECAP2_INT_ISR(void)    // ECAP-2
{
  // Insert ISR Code here
  
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT4.3
interrupt void ECAP3_INT_ISR(void)    // ECAP-3
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;
  
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT4.4
interrupt void ECAP4_INT_ISR(void)     // ECAP-4
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT4.5 - Reserved
// INT4.6 - Reserved
// INT4.7 - Reserved
// INT4.8 - Reserved

// -----------------------------------------------------------
// PIE Group 5 - MUXed into CPU INT5
// -----------------------------------------------------------

// INT 5.1
interrupt void EQEP1_INT_ISR(void)    // EQEP-1
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT5.2
interrupt void EQEP2_INT_ISR(void)    // EQEP-2
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;
 
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT5.3 - Reserved
// INT5.4 - Reserved
// INT5.5 - Reserved
// INT5.6 - Reserved
// INT5.7 - Reserved
// INT5.8 - Reserved

// -----------------------------------------------------------
// PIE Group 6 - MUXed into CPU INT6
// -----------------------------------------------------------

// INT6.1
interrupt void SPIRXINTA_ISR(void)    // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.2
interrupt void SPITXINTA_ISR(void)     // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.3 
interrupt void SPIRXINTB_ISR(void)     // SPI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.4
interrupt void SPITXINTB_ISR(void)     // SPI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.5
interrupt void SPIRXINTC_ISR(void)     // SPI-C
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.6
interrupt void SPITXINTC_ISR(void)     // SPI-C
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.7
interrupt void SPIRXINTD_ISR(void)     // SPI-D
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.8
interrupt void SPITXINTD_ISR(void)     // SPI-D
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}


// -----------------------------------------------------------
// PIE Group 7 - MUXed into CPU INT7
// -----------------------------------------------------------

// INT7.1 - Reserved
// INT7.2 - Reserved
// INT7.3 - Reserved
// INT7.4 - Reserved
// INT7.5 - Reserved
// INT7.6 - Reserved
// INT7.7 - Reserved
// INT7.8 - Reserved

// -----------------------------------------------------------
// PIE Group 8 - MUXed into CPU INT8
// -----------------------------------------------------------

// INT8.1
interrupt void I2CINT1A_ISR(void)     // I2C-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT8.2
interrupt void I2CINT2A_ISR(void)     // I2C-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT8.3 - Reserved
// INT8.4 - Reserved
// INT8.5 - Reserved
// INT8.6 - Reserved
// INT8.7 - Reserved
// INT8.8 - Reserved


// -----------------------------------------------------------
// PIE Group 9 - MUXed into CPU INT9
// -----------------------------------------------------------

// INT9.1
interrupt void SCIRXINTA_ISR(void)     // SCI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.2
interrupt void SCITXINTA_ISR(void)     // SCI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}


// INT9.3
interrupt void SCIRXINTB_ISR(void)     // SCI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.4
interrupt void SCITXINTB_ISR(void)     // SCI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.5
interrupt void ECAN0INTA_ISR(void)  // eCAN-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.6
interrupt void ECAN1INTA_ISR(void)  // eCAN-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.7
interrupt void ECAN0INTB_ISR(void)  // eCAN-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.8
interrupt void ECAN1INTB_ISR(void)  // eCAN-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// -----------------------------------------------------------
// PIE Group 10 - MUXed into CPU INT10
// -----------------------------------------------------------

// INT10.1 - Reserved
// INT10.2 - Reserved
// INT10.3 - Reserved
// INT10.4 - Reserved
// INT10.5 - Reserved
// INT10.6 - Reserved
// INT10.7 - Reserved
// INT10.8 - Reserved


// -----------------------------------------------------------
// PIE Group 11 - MUXed into CPU INT11
// -----------------------------------------------------------

// INT11.1 - Reserved
// INT11.2 - Reserved
// INT11.3 - Reserved
// INT11.4 - Reserved
// INT11.5 - Reserved
// INT11.6 - Reserved
// INT11.7 - Reserved
// INT11.8 - Reserved

// -----------------------------------------------------------
// PIE Group 12 - MUXed into CPU INT12
// -----------------------------------------------------------

// INT12.1 - Reserved
// INT12.2 - Reserved
// INT12.3 - Reserved
// INT12.4 - Reserved
// INT12.5 - Reserved
// INT12.6 - Reserved
// INT12.7 - Reserved
// INT12.8 - Reserved

//---------------------------------------------------------------------------
// Catch All Default ISRs: 
//

interrupt void EMPTY_ISR(void)  // Empty ISR - only does a return.
{

}

interrupt void PIE_RESERVED(void)  // Reserved space.  For test.
{
  asm ("      ESTOP0");
  for(;;);
}

interrupt void rsvd_ISR(void)      // For test
{
  asm ("      ESTOP0");
  for(;;);
}

//===========================================================================
// End of file.
//===========================================================================