ukhjbxx.pas

专业品质

unit UKHJBXX;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, StdCtrls, ExtCtrls, Buttons, ToolWin, ComCtrls, Grids, DBGrids;

type
  TFRM_KHJBXX = class(TForm)
    ToolBar1: TToolBar;
    SpeedButton1: TSpeedButton;
    SpeedButton2: TSpeedButton;
    SpeedButton3: TSpeedButton;
    SpeedButton4: TSpeedButton;
    SpeedButton5: TSpeedButton;
    SpeedButton6: TSpeedButton;
    Panel1: TPanel;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    Label8: TLabel;
    Label9: TLabel;
    Label10: TLabel;
    Label11: TLabel;
    Label12: TLabel;
    Label13: TLabel;
    Label14: TLabel;
    Label15: TLabel;
    Label16: TLabel;
    Label17: TLabel;
    Label18: TLabel;
    Label19: TLabel;
    Label20: TLabel;
    Edit1: TEdit;
    Edit2: TEdit;
    Edit3: TEdit;
    Edit4: TEdit;
    Edit5: TEdit;
    Edit6: TEdit;
    Edit7: TEdit;
    Edit8: TEdit;
    Edit9: TEdit;
    Edit10: TEdit;
    Edit11: TEdit;
    Edit12: TEdit;
    Edit13: TEdit;
    Edit14: TEdit;
    Edit15: TEdit;
    Edit16: TEdit;
    Edit17: TEdit;
    Edit18: TEdit;
    Edit19: TEdit;
    Edit20: TEdit;
    Panel2: TPanel;
    DBGrid1: TDBGrid;
    procedure SpeedButton6Click(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure SpeedButton1Click(Sender: TObject);
    procedure SpeedButton2Click(Sender: TObject);
    procedure SpeedButton3Click(Sender: TObject);
    procedure SpeedButton4Click(Sender: TObject);
    procedure SpeedButton5Click(Sender: TObject);
    procedure Edit2Change(Sender: TObject);
    procedure Edit3Change(Sender: TObject);
    procedure Edit4Change(Sender: TObject);
    procedure Edit5Change(Sender: TObject);
    procedure Edit6Change(Sender: TObject);
    procedure Edit7Change(Sender: TObject);
    procedure Edit8Change(Sender: TObject);
    procedure Edit9Change(Sender: TObject);
    procedure Edit10Change(Sender: TObject);
    procedure Edit11Change(Sender: TObject);
    procedure Edit12Change(Sender: TObject);
    procedure Edit13Change(Sender: TObject);
    procedure Edit14Change(Sender: TObject);
    procedure Edit15Change(Sender: TObject);
    procedure Edit16Change(Sender: TObject);
    procedure Edit17Change(Sender: TObject);
    procedure Edit18Change(Sender: TObject);
    procedure Edit19Change(Sender: TObject);
    procedure Edit20Change(Sender: TObject);
    procedure Edit1KeyPress(Sender: TObject; var Key: Char);
    procedure Edit2KeyPress(Sender: TObject; var Key: Char);
    procedure Edit3KeyPress(Sender: TObject; var Key: Char);
    procedure Edit4KeyPress(Sender: TObject; var Key: Char);
    procedure Edit5KeyPress(Sender: TObject; var Key: Char);
    procedure Edit6KeyPress(Sender: TObject; var Key: Char);
    procedure Edit7KeyPress(Sender: TObject; var Key: Char);
    procedure Edit8KeyPress(Sender: TObject; var Key: Char);
    procedure Edit9KeyPress(Sender: TObject; var Key: Char);
    procedure Edit10KeyPress(Sender: TObject; var Key: Char);
    procedure Edit11KeyPress(Sender: TObject; var Key: Char);
    procedure Edit12KeyPress(Sender: TObject; var Key: Char);
    procedure Edit13KeyPress(Sender: TObject; var Key: Char);
    procedure Edit14KeyPress(Sender: TObject; var Key: Char);
    procedure Edit15KeyPress(Sender: TObject; var Key: Char);
    procedure Edit16KeyPress(Sender: TObject; var Key: Char);
    procedure Edit17KeyPress(Sender: TObject; var Key: Char);
    procedure Edit18KeyPress(Sender: TObject; var Key: Char);
    procedure Edit19KeyPress(Sender: TObject; var Key: Char);
    procedure Edit20KeyPress(Sender: TObject; var Key: Char);
    procedure DBGrid1CellClick(Column: TColumn);
    procedure DBGrid1DrawColumnCell(Sender: TObject; const Rect: TRect;
      DataCol: Integer; Column: TColumn; State: TGridDrawState);
  private
    { Private declarations }
  public
    procedure tr;       //去除空字符
    procedure bh;        //自动编号
    Procedure GetAll;    //获得所有数据
    Procedure Posting;   //提交数据
    Procedure CLS;       //清除控件中内容
    Procedure DIS;       //控件不可用
    Procedure ENA;       //控件可用
    Function CanSave:Boolean;   //判断是否保存
    { Public declarations }
  end;

var
  FRM_KHJBXX: TFRM_KHJBXX;

implementation

uses UDM, UMAIN, UYHQX;

{$R *.dfm}
procedure TFRM_KHJBXX.tr;
var
i:integer;
begin
  for i:=ComponentCount - 1 downto 0 do
    if(Components[i] is TEdit) then
    TEdit(Components[i]).Text:=trim(TEdit(Components[i]).Text);
end;
Function TFRM_KHJBXX.CanSave: Boolean;
begin
  if (Edit1.Text='') then
  begin
   Result:=False;
   Application.MessageBox('客户编号不能为空！','提示信息',0+MB_ICONINFORMATION);
   exit;
  end;
  if (Edit2.Text='') then
  begin
    Result:=False;
    Application.MessageBox('客户名称不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit3.Text='') then
  begin
    Result:=False;
    Application.MessageBox('公司性质不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit4.Text='') then
  begin
    Result:=False;
    Application.MessageBox('公司类别不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit5.Text='') then
  begin
    Result:=False;
    Application.MessageBox('法人代表不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit6.Text='') then
  begin
    Result:=False;
    Application.MessageBox('所属省份不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit7.Text='') then
  begin
    Result:=False;
    Application.MessageBox('通信地址不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit8.Text='') then
  begin
    Result:=False;
    Application.MessageBox('电子邮箱不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit9.Text='') then
  begin
    Result:=False;
    Application.MessageBox('主销产品不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit10.Text='') then
  begin
    Result:=False;
    Application.MessageBox('纳税号不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit11.Text='') then
  begin
    Result:=False;
    Application.MessageBox('联系人不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit12.Text='') then
  begin
    Result:=False;
    Application.MessageBox('联系电话不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit13.Text='') then
  begin
    Result:=False;
    Application.MessageBox('固定电话不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit14.Text='') then
  begin
    Result:=False;
    Application.MessageBox('传真不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit15.Text='') then
  begin
    Result:=False;
    Application.MessageBox('邮编不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit16.Text='') then
  begin
    Result:=False;
    Application.MessageBox('开户银行不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit17.Text='') then
  begin
    Result:=False;
    Application.MessageBox('银行账号不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit18.Text='') then
  begin
    Result:=False;
    Application.MessageBox('期初欠款不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
  if (Edit19.Text='') then
  begin
    Result:=False;
    Application.MessageBox('公司主页不能为空！','提示信息',0+MB_ICONINFORMATION);
    exit;
  end;
end;

procedure TFRM_KHJBXX.bh;
var
i:integer;
s,m:string;
begin
  s:= 'KH'+ FormatDateTime('yyyymmdd',Now());
  With DM.QKHJBXX do
  begin
    Close;
    SQL.Clear;
    SQL.Add('select max(客户编号) as ss From 客户信息表');
    Open;
  end;
  If DM.QKHJBXX.FieldByName('ss').Value=null then
    s := s + '001'
  else
  begin
    m:= Trim(DM.QKHJBXX.FieldByName('ss').Value) ;
    i:= StrToInt(Trim(Copy(m,11,8))) ;
    s:= s +Formatfloat('000',i+1);
  end;
  Edit1.Text := s;
end;

procedure TFRM_KHJBXX.GetAll;
begin
  Edit1.Text:=DM.DSOKHJBXX.FieldByName('客户编号').AsString;
  Edit2.Text:=DM.DSOKHJBXX.FieldByName('客户名称').AsString;
  Edit3.Text:=DM.DSOKHJBXX.FieldByName('公司性质').AsString;
  Edit4.Text:=DM.DSOKHJBXX.FieldByName('公司类别').AsString;
  Edit5.Text:=DM.DSOKHJBXX.FieldByName('法人代表').AsString;
  Edit6.Text:=DM.DSOKHJBXX.FieldByName('所属省份').AsString;
  Edit7.Text:=DM.DSOKHJBXX.FieldByName('通信地址').AsString;
  Edit8.Text:=DM.DSOKHJBXX.FieldByName('电子邮箱').AsString;
  Edit9.Text:=DM.DSOKHJBXX.FieldByName('主销产品').AsString;
  Edit10.Text:=DM.DSOKHJBXX.FieldByName('纳税号').AsString;
  Edit11.Text:=DM.DSOKHJBXX.FieldByName('联系人').AsString;
  Edit12.Text:=DM.DSOKHJBXX.FieldByName('联系电话').AsString;
  Edit13.Text:=DM.DSOKHJBXX.FieldByName('固定电话').AsString;
  Edit14.Text:=DM.DSOKHJBXX.FieldByName('传真').AsString;
  Edit15.Text:=DM.DSOKHJBXX.FieldByName('邮编').AsString;
  Edit16.Text:=DM.DSOKHJBXX.FieldByName('开户银行').AsString;
  Edit17.Text:=DM.DSOKHJBXX.FieldByName('银行账号').AsString;
  Edit18.Text:=DM.DSOKHJBXX.FieldByName('期初欠款').AsString;
  Edit19.Text:=DM.DSOKHJBXX.FieldByName('公司主页').AsString;
  Edit20.Text:=DM.DSOKHJBXX.FieldByName('备注').AsString;
end;
procedure TFRM_KHJBXX.Posting;
begin
  if ActionCD='N' then
  BEGIN
    with DM.QKHJBXX do
    begin
      Close;
      SQL.Clear;
      SQL.Add('INSERT INTO 客户信息表(客户编号,客户名称,公司性质,公司类别,法人代表,所属省份,');
      SQL.Add('通信地址,电子邮箱,主销产品,纳税号,联系人,联系电话,固定电话,传真,邮编,开户银行,');
      SQL.Add('银行账号,期初欠款,公司主页,备注)');
      SQL.Add('Values(:客户编号,:客户名称,:公司性质,:公司类别,:法人代表,:所属省份,:通信地址,');
      SQL.Add(':电子邮箱,:主销产品,:纳税号,:联系人,:联系电话,:固定电话,:传真,:邮编,:开户银行,');
      SQL.Add(':银行账号,:期初欠款,:公司主页,:备注)');
      Parameters.Items[0].Value:=Edit1.Text;
      Parameters.Items[1].Value:=Edit2.Text;
      Parameters.Items[2].Value:=Edit3.Text;
      Parameters.Items[3].Value:=Edit4.Text;
      Parameters.Items[4].Value:=Edit5.Text;
      Parameters.Items[5].Value:=Edit6.Text;
      Parameters.Items[6].Value:=Edit7.Text;
      Parameters.Items[7].Value:=Edit8.Text;
      Parameters.Items[8].Value:=Edit9.Text;
      Parameters.Items[9].Value:=Edit10.Text;
      Parameters.Items[10].Value:=Edit11.Text;
      Parameters.Items[11].Value:=Edit12.Text;
      Parameters.Items[12].Value:=Edit13.Text;
      Parameters.Items[13].Value:=Edit14.Text;
      Parameters.Items[14].Value:=Edit15.Text;
      Parameters.Items[15].Value:=Edit16.Text;
      Parameters.Items[16].Value:=Edit17.Text;
      Parameters.Items[17].Value:=Edit18.Text;
      Parameters.Items[18].Value:=Edit19.Text;
      Parameters.Items[19].Value:=Edit20.Text;
      Prepared:=True;
      ExecSQL;
    end;
  END else
  if ActionCD='M' then
  begin
    With DM.QKHJBXX DO
    begin
      Close;
      SQL.Clear;
      SQL.Add('update 客户信息表 Set 客户名称=:客户名称1,公司性质=:公司性质1,公司类别=:公司类别1,法人代表=:法人代表1,所属省份=:所属省份1,通信地址=:通信地址1,');
      SQL.Add('电子邮箱=:电子邮箱1,主销产品=:主销产品1,纳税号=:纳税号1,联系人=:联系人1,联系电话=:联系电话1,固定电话=:固定电话1,传真=:传真1,邮编=:邮编1,开户银行=:开户银行1,');
      SQL.Add('银行账号=:银行账号1,期初欠款=:期初欠款1,公司主页=:公司主页1,备注=:备注1 where 客户编号=:客户编号1');
      Parameters.Items[0].Value:=Edit2.Text;
      Parameters.Items[1].Value:=Edit3.Text;
      Parameters.Items[2].Value:=Edit4.Text;
      Parameters.Items[3].Value:=Edit5.Text;
      Parameters.Items[4].Value:=Edit6.Text;
      Parameters.Items[5].Value:=Edit7.Text;
      Parameters.Items[6].Value:=Edit8.Text;
      Parameters.Items[7].Value:=Edit9.Text;
      Parameters.Items[8].Value:=Edit10.Text;
      Parameters.Items[9].Value:=Edit11.Text;
      Parameters.Items[10].Value:=Edit12.Text;
      Parameters.Items[11].Value:=Edit13.Text;
      Parameters.Items[12].Value:=Edit14.Text;
      Parameters.Items[13].Value:=Edit15.Text;
      Parameters.Items[14].Value:=Edit16.Text;
      Parameters.Items[15].Value:=Edit17.Text;
      Parameters.Items[16].Value:=Edit18.Text;
      Parameters.Items[17].Value:=Edit19.Text;
      Parameters.Items[18].Value:=Edit20.Text;
      Parameters.Items[19].Value:=DM.DSOKHJBXX.FieldByName('客户编号').AsString;
      Prepared:=true;
      ExecSQL;
    end;
  end;
end;
procedure TFRM_KHJBXX.ENA;
var
  i:integer;