basysrevedemo_map.mrp
来自「actel BASYs开发板自带的demo程序」· MRP 代码 · 共 298 行 · 第 1/2 页
MRP
298 行
24 signal(s) removedSection 5 - Removed Logic-------------------------The trimmed logic report below shows the logic removed from your design due to
sourceless or loadless signals, and VCC or ground connections. If the removal
of a signal or symbol results in the subsequent removal of an additional signal
or symbol, the message explaining that second removal will be indented. This
indentation will be repeated as a chain of related logic is removed.To quickly locate the original cause for the removal of a chain of logic, look
above the place where that logic is listed in the trimming report, then locate
the lines that are least indented (begin at the leftmost edge).The signal "XLXN_524" is loadless and has been removed. Loadless block "XLXI_174" (ONE) removed.Loadless block "XLXI_66/BUFG_inst1" (CKBUF) removed.The signal "XLXI_66/CLKDLL_inst/DSSEN" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/PSINCDEC" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/PSEN" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/PSCLK" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLK0" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLK90" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLK180" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLK270" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLK2X180" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLKFX" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/CLKFX180" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/LOCKED" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/PSDONE" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<7>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<6>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<5>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<4>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<3>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<2>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<1>" is sourceless and has been removed.The signal "XLXI_66/CLKDLL_inst/STATUS<0>" is sourceless and has been removed.The trimmed logic reported below is either: 1. part of a cycle 2. part of disabled logic 3. a side-effect of other trimmed logicThe signal "XLXN_156" is unused and has been removed.The signal "XLXN_157" is unused and has been removed.Optimized Block(s):TYPE BLOCKGND XLXI_62GND XLXI_65GND XST_GNDVCC XST_VCCTo enable printing of redundant blocks removed and signals merged, set the
detailed map report option and rerun map.Section 6 - IOB Properties--------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+| IOB Name | IOB Type | Direction | IO Standard | Drive | Slew | Reg (s) | Resistor | IBUF/IFD || | | | | Strength | Rate | | | Delay |+-----------------------------------------------------------------------------------------------------------------------------------------+| CLK1 | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || CLK2 | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || HSYNC | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || PS2C | IOB | BIDIR | LVCMOS25 | 2 | SLOW | IFF1 TFF1 | PULLUP | 0 / 2 || PS2D | IOB | BIDIR | LVCMOS25 | 2 | SLOW | IFF1 TFF1 | PULLUP | 0 / 2 || VSYNC | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | OFF1 | PULLUP | 0 / 0 || an<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || an<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || an<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || an<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || btn<0> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || btn<1> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || btn<2> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || btn<3> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || dp | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<4> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<5> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<6> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || led<7> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<4> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<5> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || seg<6> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | 0 / 0 || sw<0> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<1> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<2> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<3> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<4> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<5> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<6> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || sw<7> | IBUF | INPUT | LVCMOS25 | | | | | 0 / 0 || vgaBlue<0> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaBlue<1> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaGreen<0> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaGreen<1> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaGreen<2> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaRed<0> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaRed<1> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 || vgaRed<2> | IOB | OUTPUT | LVCMOS25 | 2 | SLOW | | PULLUP | 0 / 0 |+-----------------------------------------------------------------------------------------------------------------------------------------+Section 7 - RPMs----------------Section 8 - Guide Report------------------------Guide not run on this design.Section 9 - Area Group and Partition Summary--------------------------------------------Partition Implementation Status------------------------------- No Partitions were found in this design.-------------------------------Area Group Information---------------------- No area groups were found in this design.----------------------Section 10 - Modular Design Summary-----------------------------------Modular Design not used for this design.Section 11 - Timing Report--------------------------This design was not run using timing mode.Section 12 - Configuration String Details-----------------------------------------Use the "-detail" map option to print out Configuration Strings⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?