⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hxcolor.h

📁 linux下的一款播放器
💻 H
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: hxcolor.h,v 1.1.18.1 2004/07/09 02:00:01 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#ifndef _HXCOLOR_H_#define _HXCOLOR_H_#ifdef __cplusplusextern "C" {#endif#include "ciddefs.h"/* * component GUID support. */HX_RESULT HXEXPORT ENTRYPOINT(GetHXColorGUID) (UCHAR* pGUID);/* * Initialize color conversion library. */void HXEXPORT ENTRYPOINT(InitColorConverter) ();/* * Set YUV color adjustments. * Use: *  void SetColorAdjustments (float Brightness, *              float Contrast, float Saturation, float Hue); * Input: *  Brightness - brightness adjustment [-1,1], default - 0 *  Contrast   - contrast adjustment [-1,1], default - 0 *  Saturation - saturation adjustment [-1,1], default - 0 *  Hue        - hue adjustment  [-1,1], default - 0 * Returns: *  none. */void HXEXPORT ENTRYPOINT(SetColorAdjustments) (float Brightness,                float Contrast, float Saturation, float Hue);/* * Get the current YUV color adjustments. * Use: *  void GetColorAdjustments (float *Brightness, *              float *Contrast, float *Saturation, float *Hue); * Output: *  Brightness - brightness adjustment [-1,1], default - 0 *  Contrast   - contrast adjustment [-1,1], default - 0 *  Saturation - saturation adjustment [-1,1], default - 0 *  Hue        - hue adjustment  [-1,1], default - 0 * Returns: *  none. */void HXEXPORT ENTRYPOINT(GetColorAdjustments) (float* Brightness,                float* Contrast, float* Saturation, float* Hue);/* * Suggest palette to use for 8-bit RGB output. * Use: *  int SuggestRGB8Palette (int nColors, UINT32 *lpRGBVals); * Input: *  nColors - the number of existing colors in palette *  lpRGBVals - RGB values for each palette entry *  lpIndices - pixel values (palette indices) * Returns: *  >0, the total number of colors to be used, if success *  -1, if error */#ifdef _FAT_HXCOLORint HXEXPORT ENTRYPOINT(SuggestRGB8Palette) (int nColors, UINT32 *lpRGBVals);#endif/* * Set palette to use for 8-bit RGB output. * Use: *  int SetRGB8Palette (int nColors, UINT32 *lpRGBVals, int *lpIndices); * Input: *  nColors - the number of colors in palette *  lpRGBVals - RGB values for each palette entry *  lpIndices - pixel values (palette indices) * Returns: *  >0, the total number of colors set, if success *  -1, if error */#ifdef _FAT_HXCOLORint HXEXPORT ENTRYPOINT(SetRGB8Palette) (int nColors, UINT32 *lpRGBVals, int *lpIndices);#endif/* * Sets YUV 4:4:4 -> YUV 4:2:0 chroma resampling mode * Use: *  int SetChromaResamplingMode(int nNewMode); * Input: *  nNewMode - a chroma resampling mode to use *   E.g. given input   a b *   chroma samples:    c d *   we will produce: *      mode = 0:       (a+b+c+d) / 4 *             1:       (a+b) / 2 *             2:       (c+d) / 2 * Returns: *  previously set resampling mode. */#ifdef _FAT_HXCOLORint HXEXPORT ENTRYPOINT(SetChromaResamplingMode)(int nNewMode);#endif/* * Low-level format-conversion routines. * Use: *  int XXXXtoYYYY (unsigned char *dest_ptr, int dest_width, int dest_height, *      int dest_pitch, int dest_x, int dest_y, int dest_dx, int dest_dy, *      unsigned char *src_ptr, int src_width, int src_height, int src_pitch, *      int src_x, int src_y, int src_dx, int src_dy); * Input: *  dest_ptr - pointer to a destination buffer *  dest_width, dest_height - width/height of the destination image (pixels) *  dest_pitch - pitch of the dest. buffer (in bytes; <0 - if bottom up image) *  dest_x, dest_y, dest_dx, dest_dy - destination rectangle (pixels) *  src_ptr - pointer to an input image *  src_width, src_height - width/height of the input image (pixels) *  src_pitch - pitch of the source buffer (in bytes; <0 - if bottom up image) *  src_x, src_y, src_dx, src_dy - source rectangle (pixels) * Returns: *  0 - if success; -1 if failure. * Notes: *  a) In all cases, pointers to the source and destination buffers must be *     DWORD aligned, and both pitch parameters must be multiple of 4!!! *  b) Converters that deal with YUV 4:2:2, or 4:2:0 formats may also require *     rectangle parameters (x,y,dx,dy) to be multiple of 2. Failure to provide *     aligned rectangles will result in partially converted image. *  c) Currently only scale factors of 1:1 and 2:1 are supported; if the rates *     dest_dx/src_dx & dest_dy/src_dy are neither 1, or 2, the converters *     will fail. */typedef int (* LPHXCOLORCONVERTER) \            (unsigned char *, int, int, int, int, int, int, int, \            unsigned char *, int, int, int, int, int, int, int);    #if defined(HELIX_CONFIG_NOSTATICS)#include "nostatic/yuv.h" //for color_data_t    typedef int (* LPHXCOLORCONVERTERNOSTATIC) \          (unsigned char *, int, int, int, int, int, int, int, \           unsigned char *, int, int, int, int, int, int, int, \           color_data_t* );    #endif    HX_RESULT HXEXPORT ENTRYPOINT(GetCompatibleColorFormats)(INT32 cidIn, INT32* pcidOut, UINT32* pnSize);/* * Find a converter to trasform data from format X to format Y. * Use: *  LPHXCOLORCONVERTER GetColorConverter (INT32 cidIn, INT32 cidOut); * Input: *  cidIn - input color format ID (!CID_UNKNOWN) *  cidOut - desirable output color format ID (!CID_UNKNOWN) * Returns: *  pointer to an appropriate color conversion routine, if success; *  NULL - conversion is not supported. */LPHXCOLORCONVERTER HXEXPORT ENTRYPOINT(GetColorConverter) (INT32 cidIn, INT32 cidOut);/* * Low-level format-conversion routines. * Use: *  int I420toYYYY (unsigned char *dest_ptr, int dest_width, int dest_height, *      int dest_pitch, int dest_x, int dest_y, int dest_dx, int dest_dy, *      unsigned char *pY, unsigned char *pU, unsigned char *pV, *      int src_width, int src_height, int yPitch, int uPitch, int vPitch, *      int src_x, int src_y, int src_dx, int src_dy); * Input: *  dest_ptr - pointer to a destination buffer *  dest_width, dest_height - width/height of the destination image (pixels) *  dest_pitch - pitch of the dest. buffer (in bytes; <0 - if bottom up image) *  dest_x, dest_y, dest_dx, dest_dy - destination rectangle (pixels) *  pY - pointer to the y plane *  pU - pointer to the u plane *  pV - pointer to the v plane *  src_width, src_height - width/height of the input image (pixels) *  yPitch - pitch of the y source buffer (in bytes; <0 - if bottom up image) *  uPitch - pitch of the u source buffer (in bytes; <0 - if bottom up image) *  vPitch - pitch of the v source buffer (in bytes; <0 - if bottom up image) *  src_x, src_y, src_dx, src_dy - source rectangle (pixels) * Returns: *  0 - if success; -1 if failure. * Notes: *  a) In all cases, pointers to the source and destination buffers must be *     DWORD aligned, and both pitch parameters must be multiple of 4!!! *  b) Converters that deal with YUV 4:2:2, or 4:2:0 formats may also require *     rectangle parameters (x,y,dx,dy) to be multiple of 2. Failure to provide *     aligned rectangles will result in partially converted image. *  c) Currently only scale factors of 1:1 and 2:1 are supported; if the rates *     dest_dx/src_dx & dest_dy/src_dy are neither 1, or 2, the converters *     will fail. */typedef int (* LPHXCOLORCONVERTER2) \                (unsigned char *, int, int, int, int, int, int, int, \                 unsigned char *, unsigned char *, unsigned char *,  \                 int, int, int, int, int, int, int, int, int);LPHXCOLORCONVERTER2 HXEXPORT ENTRYPOINT(GetColorConverter2) (INT32 cidIn, INT32 cidOut);/// Because ADS1.2 armcpp crash bug, we will not using these function on Openwave platform.#ifndef ADS12/* * Try selected compatible color formats. * Use: *  BOOL ScanCompatibleColorFormats (INT32 cidIn, INT32 cidOutMask, void *pParam, *      BOOL (*pfnTryIt) (void *pParam, INT32 cidOut, LPHXCOLORCONVERTER pfnCC)); * Input: *  cidIn - input color format ID (!CID_UNKNOWN) *  cidOutMask - masks output formats to try (use ~0 to scan all formats) *  pParam - pointer to a parameter block to pass to fpTryIt () *  pfnTryIt - pointer to a function, which will be called for each *          compatible output format; * Special Inputs: *  Last INT32 argument is dummy unused one created just for avoiding ADS 1.2 ARM compiler's crash due to  *  not being able handle nested function ptr as the last argument. It should be taken out once we *  are sure that is not the case such as compiler update from current 1.2 to 2.0. * * Returns: *  TRUE, if fpTryIt() has exited with TRUE status; *  FALSE, if non of the compatible formats has been accepted by fpTryIt(). */BOOL HXEXPORT ENTRYPOINT(ScanCompatibleColorFormats) (INT32 cidIn, INT32 cidOutMask, void *pParam,                                                      BOOL (*pfnTryIt) (void *pParam, INT32 cidOut, LPHXCOLORCONVERTER pfnCC),INT32=0);/* * Try all compatible color formats. */BOOL HXEXPORT ENTRYPOINT(ScanAllCompatibleColorFormats) (BOOL (*pfnTryIt) (void *pParam, INT32 cidOut, LPHXCOLORCONVERTER pfnCC)                                                         ,INT32 cidIn, void *pParam);#endif/*********************** * Old HXCOLOR.DLL interface: ****************************************************/#define T_RGB888 7#define T_RGB555 8#define T_RGB565 9/* * Main color-conversion function. * * Input: *  ysrc, usrc, vsrc - pointers to planar YUV420 *  dst - pointer to RGB output buffer *  width, height - size of input image, in pixels *  pitch - horizontal pitch of RGB output buffer, in pixels *          negative pitch toggles inverted output *          usually, pitch = width (or 2*width if expanding) *  format - format of RGB output buffer *  expand - flag to enable bilinear-interpolated output *           output buffer must be twice as large * * Output: *  dst filled with RGB output. */#ifdef _FAT_HXCOLORvoid HXEXPORT ENTRYPOINT(ConvertYUVtoRGB)   (UCHAR* ySrc,                 UCHAR* uSrc,                 UCHAR* vSrc,                 INT32  nPitchSrc,                 UCHAR* Dst,                 INT32  nWidth,                 INT32  nHeight,                 INT32  nPitchDst,                 INT16  nFormat,                 INT16  nExpand);#endif/* * Mac color-conversion function. * * Input: *  ysrc, usrc, vsrc - pointers to planar YUV420 *  dst - pointer to RGB output buffer *  width, height - size of input image, in pixels *  pitch - horizontal pitch of RGB output buffer, in pixels *          negative pitch toggles inverted output *          usually, pitch = width (or 2*width if expanding) *  format - format of RGB output buffer *  expand - flag to enable bilinear-interpolated output *           output buffer must be twice as large * * Output: *  dst filled with RGB output. */#ifdef _FAT_HXCOLOR#ifdef _MACINTOSH#pragma export on#endif //_MACINTOSHvoid HXEXPORT ENTRYPOINT(ConvertYUVtoMacRGB32)   (UCHAR* ySrc,                 UCHAR* uSrc,                 UCHAR* vSrc,                 INT32  nPitchSrc,                 UCHAR* Dst,                 INT32  nWidth,                 INT32  nHeight,                 INT32  nPitchDst,                 INT16  nFormat,                 INT16  nExpand);#ifdef _MACINTOSH#pragma export off#endif //_MACINTOSH#endif/* * Converts a RGB3 buffer into a YUV buffer in Y'CbCr 4:2:0 format. */#ifdef _FAT_HXCOLORvoid HXEXPORT ENTRYPOINT(ConvertRGBtoYUV)   (UCHAR* pInput,                 UCHAR* pOutput,                 INT32  nWidth,                 INT32  nHeight,                 BOOL   bBGR);#endif/* * Converts a RGB3 buffer into an XRGB buffer. */#ifdef _FAT_HXCOLORvoid HXEXPORT ENTRYPOINT(ConvertRGB24toXRGB) (UCHAR* pSrc, UCHAR* pDest,    ULONG32 srcSize, ULONG32 destSize, INT32 nWidth, INT32 nHeight);#endif#ifdef __cplusplus}#endif#endif // _HXCOLOR_H_

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -