⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hxchkpt2.h

📁 linux下的一款播放器
💻 H
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: hxchkpt2.h,v 1.4.32.3 2004/07/09 01:46:15 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** *//*    @description This is another cut at the RN checkpoint macros. It is designed to plugin seamlessly,     it defines the same macros as the main hxchkpt.h header.      Removes checkpoint lists - all checkpoints now stored in the checkpoint manager      Does not support accumulators      Designed to produce output that is then post processed*/#ifndef _HXCHKPT2_H_#define _HXCHKPT2_H_#ifndef _RNPERFORMANCE_H_#error This file must not be included on its own. You should include hxperf.h#endif#ifdef ENABLE_CHECKPOINTS2#include "hlxclib/stdio.h"#include "hxtick.h"#ifdef SECTIONS_ONLY// If we're just logging sections we don't need to allocate so much space for checkpoints#define MAX_CHECKPOINTS_PER_MODULE 100#define MAX_COMMENT_CHARACTERS 100#else#define MAX_CHECKPOINTS_PER_MODULE 600000#define MAX_COMMENT_CHARACTERS 100000#endifstruct CHXCheckpoint2{    enum CheckpointType { ENTER_BLOCK, EXIT_BLOCK, CHECKPOINT };        const char* m_pFunctionName;    const char* m_pComment;    const char* m_pFileName;    UINT32 m_ulLineNumber;    double m_dTime;    CheckpointType m_type;};class CHXCheckpointManager2{public:    CHXCheckpointManager2( const char* pModuleName, const char* pOutputFileName )    : m_pModuleName( pModuleName ),      m_pOutputFileName( pOutputFileName ),      m_ulCheckpointIndex( 0 ),      m_pComments( m_comments )    {    }    ~CHXCheckpointManager2()    {	// Since writing to a file slows down startup time timing data is only dumped to the file when the global checkpoint	// manager object associated with a dll or exe is destroyed meaning an unload or program termination occured.	DumpCheckpoints();    }    void AddCheckpoint( const char* pFunctionName, const char* pComment, const char* pFileName, UINT32 ulLineNumber, double dTime, CHXCheckpoint2::CheckpointType type )    {	if( m_ulCheckpointIndex < MAX_CHECKPOINTS_PER_MODULE )	{	    m_CheckpointArray[ m_ulCheckpointIndex ].m_pFunctionName = pFunctionName;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_pComment = pComment;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_pFileName = pFileName;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_ulLineNumber = ulLineNumber;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_dTime = dTime;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_type = type;	}	++m_ulCheckpointIndex;    }    const char* AddCheckpointCopy( const char* pFunctionName, const char* pComment, const char* pFileName, UINT32 ulLineNumber, double dTime, CHXCheckpoint2::CheckpointType type )    {    	const char* result = "Unknown";    		if( m_ulCheckpointIndex < MAX_CHECKPOINTS_PER_MODULE )	{	    m_CheckpointArray[ m_ulCheckpointIndex ].m_pFunctionName = pFunctionName;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_pFileName = pFileName;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_ulLineNumber = ulLineNumber;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_dTime = dTime;	    m_CheckpointArray[ m_ulCheckpointIndex ].m_type = type;	    const int len = strlen( pComment );	    if( m_pComments < m_comments + MAX_COMMENT_CHARACTERS && m_pComments + len + 1 < m_comments + MAX_COMMENT_CHARACTERS )	    {	    	m_CheckpointArray[ m_ulCheckpointIndex ].m_pComment = m_pComments;	    	memcpy( m_pComments, pComment, len + 1 ); /* Flawfinder: ignore */	    }	    else	    {	    	m_CheckpointArray[ m_ulCheckpointIndex ].m_pComment = "Unknown";	    }	    result = m_pComments;	    m_pComments += len + 1;	}	++m_ulCheckpointIndex;	return result;    }    const char* CommentPrefix( CHXCheckpoint2::CheckpointType type )    {    	switch( type )    	{    	    case CHXCheckpoint2::ENTER_BLOCK:    	    	return "Enter ";    	    	break;    	    case CHXCheckpoint2::EXIT_BLOCK:    	    	return "Exit ";    	    	break;    	    case CHXCheckpoint2::CHECKPOINT:    	    	return "";    	    	break;    	}    	return "";    }        void DumpCheckpoints()    {	// We must append to the log files because the DLL might be loaded and unloaded several times.	FILE* pFile = ::fopen( m_pOutputFileName, "a+" );	if (pFile)	{	    if( m_ulCheckpointIndex > MAX_CHECKPOINTS_PER_MODULE )	    {		::fprintf( pFile, "***ERROR*** tried to store %ld checkpoints, only room for %ld\n", m_ulCheckpointIndex, MAX_CHECKPOINTS_PER_MODULE );		::fprintf( pFile, "\n\n\n" );	    }	    if( m_pComments >= m_comments + MAX_COMMENT_CHARACTERS )    	    {		::fprintf( pFile, "***ERROR*** tried to copy %ld comment characters, only room for %ld\n", m_pComments, MAX_COMMENT_CHARACTERS );		::fprintf( pFile, "\n\n\n" );	    }	    	    ::fprintf(pFile, "Format==> ElapsedTimeFromPreviousCheckpoint;ElapsedTimeFromStartOfFunction;ElapsedTimeSinceFirstModuleCheckpoint;OSTime;ModuleAndFileName;FunctionName;LineNumber;Comment\n");	    for(UINT32 j = 0; j < min( MAX_CHECKPOINTS_PER_MODULE, m_ulCheckpointIndex ); j++)	    {		::fprintf(pFile, "%.6lf;%.6lf;%.6lf;%.6lf;%s\\%s;%s;%lu;%s%s\n",		    (j ? (m_CheckpointArray[j].m_dTime - m_CheckpointArray[j-1].m_dTime) : 0),		    m_CheckpointArray[j].m_dTime - m_CheckpointArray[0].m_dTime,		    m_CheckpointArray[j].m_dTime,		    m_CheckpointArray[j].m_dTime,		    m_pModuleName,		    m_CheckpointArray[j].m_pFileName,		    m_CheckpointArray[j].m_pFunctionName,		    m_CheckpointArray[j].m_ulLineNumber,		    CommentPrefix( m_CheckpointArray[j].m_type ),		    m_CheckpointArray[j].m_pComment );	    }	    ::fclose(pFile);	}    }protected:    CHXCheckpoint2  m_CheckpointArray[ MAX_CHECKPOINTS_PER_MODULE ];    const char*	    m_pModuleName;    const char*	    m_pOutputFileName;    UINT32	    m_ulCheckpointIndex;    // This is the array used to store comments that must be copied because they are not static strings that will stick around in the module    char	    m_comments[ MAX_COMMENT_CHARACTERS ]; /* Flawfinder: ignore */    char*	    m_pComments;};extern CHXCheckpointManager2 g_HXCheckpointManager2;					\static const char* g_HXFunctionName = "Unknown";//// HXGetDoubleTickCount()// return a double in milliseconds#if defined(_WIN32) inline double HXGetDoubleTickCount(){    static double frequency = 0.0;    if( frequency == 0.0 )    {	QueryPerformanceFrequency( &QueryPerformanceFrequencyResult );	frequency = 4294967296.0;	frequency *= QueryPerformanceFrequencyResult.HighPart;	frequency += QueryPerformanceFrequencyResult.LowPart;    }    QueryPerformanceCounter( &QueryPerformanceCounterResult );    double result = 4294967296.0;    result *= QueryPerformanceCounterResult.HighPart;    result += QueryPerformanceCounterResult.LowPart;    result /= frequency;    result *= 1000.0;    return result;}#elif defined(_UNIX) && !defined(_VXWORKS)// GetTickCount in pnmisc/unix/getticcount.c chops off accuracy// this version doesn't// returns a double in millisecond with microsecond accuracyinline double HXGetDoubleTickCount(){    struct timeval tv;    gettimeofday (&tv, NULL);    return tv.tv_sec * 1000 + tv.tv_usec / 1000.0;}#endif#if defined(_WIN32) || ( defined(_UNIX) && !defined(_VXWORKS))#define HX_GET_BETTERTICKCOUNT2() HXGetDoubleTickCount()#else#define  HX_GET_BETTERTICKCOUNT2()     HX_GET_BETTERTICKCOUNT()#endif#define HX_ENABLE_CHECKPOINTS_FOR_MODULE( pModuleName, pOutputFileName )		\    CHXCheckpointManager2 g_HXCheckpointManager2(pModuleName, pOutputFileName);#define HX_SETUP_CHECKPOINTLIST( pFunctionName )// We don't support accumulators#define HX_PRIME_ACCUMULATOR(id, pComment)#define HX_UPDATE_ACCUMULATOR(id)#define HX_ACCUMULATE(id, pComment, data)#define HX_LOG_CHECKPOINT_INTEHXAL(pComment, type )						\    g_HXCheckpointManager2.AddCheckpoint( g_HXFunctionName, pComment, __FILE__, __LINE__, HX_GET_BETTERTICKCOUNT2(), type );#define HX_LOG_CHECKPOINT_INTEHXAL_COPY(pComment, type)						\    g_HXCheckpointManager2.AddCheckpointCopy( g_HXFunctionName, pComment, __FILE__, __LINE__, HX_GET_BETTERTICKCOUNT2(), type );#define HX_LOG_SINGLESHOT_CHECKPOINT_INTEHXAL( pFunctionName, pComment)			\    {										      	\	static BOOL doneCheckPoint = FALSE;					      	\	if( !doneCheckPoint )							      	\	{									      	\	    HX_LOG_CHECKPOINT_INTEHXAL( pComment, CHXCheckpoint2::CHECKPOINT )		\	    doneCheckPoint = TRUE;						      	\	}									      	\    }#ifdef SECTIONS_ONLY// We are only interesting in logging the start and end of sections. All other macros // compile out completely. This is done to provide a bare minimum profiling that will // be almost completely unaffected by the presence of the profiling code.#define HX_LOG_CHECKPOINT(pComment)#define HX_LOG_CHECKPOINT_COPY(pComment)#define HX_LOG_INITIAL_CHECKPOINT(pFunctionName)#define HX_LOG_SINGLESHOT_CHECKPOINT( pFunctionName, pComment)#define HX_LOG_BLOCK( pBlockName )#define HX_LOG_BLOCK_COPY( pBlockName )#define HX_LOG_START_SECTION( pSectionName )						\    HX_LOG_SINGLESHOT_CHECKPOINT_INTEHXAL( "", "--- Start section " pSectionName );#define HX_LOG_END_SECTION( pSectionName )						\    HX_LOG_SINGLESHOT_CHECKPOINT_INTEHXAL( "", "--- End section " pSectionName );#else#define HX_LOG_CHECKPOINT(pComment)   HX_LOG_CHECKPOINT_INTEHXAL( pComment, CHXCheckpoint2::CHECKPOINT )#define HX_LOG_CHECKPOINT_COPY(pComment)   HX_LOG_CHECKPOINT_INTEHXAL_COPY( pComment, CHXCheckpoint2::CHECKPOINT )#define HX_LOG_INITIAL_CHECKPOINT(pFunctionName)					\	    HX_SETUP_CHECKPOINTLIST( pFunctionName )					\	    HX_LOG_CHECKPOINT( "Initial Function Checkpoint" )#define HX_LOG_SINGLESHOT_CHECKPOINT( pFunctionName, pComment ) HX_LOG_SINGLESHOT_CHECKPOINT_INTEHXAL( pFunctionName, pComment )#define HX_LOG_BLOCK( pBlockName )							\    class CHXBlockLogger2								\    {											\    public:										\	CHXBlockLogger2()								\	{										\	    HX_LOG_CHECKPOINT_INTEHXAL( pBlockName, CHXCheckpoint2::ENTER_BLOCK );	\	}										\	~CHXBlockLogger2()								\	{										\	    HX_LOG_CHECKPOINT_INTEHXAL( pBlockName, CHXCheckpoint2::EXIT_BLOCK );	\	}										\    };											\    CHXBlockLogger2 blockLogger1278#define HX_LOG_BLOCK_COPY( pBlockName )							\    class CHXBlockLogger3								\    {											\    public:										\	CHXBlockLogger3( const char* pBName  )						\	{										\	    pBlockName_ = HX_LOG_CHECKPOINT_INTEHXAL_COPY( pBName, CHXCheckpoint2::ENTER_BLOCK );	\	}										\	~CHXBlockLogger3()								\	{										\	    HX_LOG_CHECKPOINT_INTEHXAL_COPY( pBlockName_, CHXCheckpoint2::EXIT_BLOCK );	\	}										\    private:										\    	const char* pBlockName_;							\    };											\    CHXBlockLogger3 blockLogger12783( pBlockName )#define HX_LOG_START_SECTION( pSectionName )						\    HX_LOG_SINGLESHOT_CHECKPOINT( "", "--- Start section " pSectionName );#define HX_LOG_END_SECTION( pSectionName )						\    HX_LOG_SINGLESHOT_CHECKPOINT( "", "--- End section " pSectionName );#endif#endif#endif // _GEMCHKPT_H_

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -