📄 timerep.cpp
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: timerep.cpp,v 1.11.32.3 2004/07/09 01:48:16 hubbe Exp $ * * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. * * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks. You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL. Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. * * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. * * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. * * Technology Compatibility Kit Test Suite(s) Location: * http://www.helixcommunity.org/content/tck * * Contributor(s): * * ***** END LICENSE BLOCK ***** */#include "hlxclib/stdlib.h"#include "hlxclib/string.h"#include <ctype.h>#include "hxstrutl.h"#include "timerep.h"#ifdef _OPENWAVE#include "hlxclib/time.h"#endif /* _OPENWAVE */#include "hxassert.h"#include "hxheap.h"#ifdef _DEBUG#undef HX_THIS_FILEstatic const char HX_THIS_FILE[] = __FILE__;#endif#define SECS_PER_MIN 60#define SECS_PER_HOUR (60*SECS_PER_MIN)#define SECS_PER_DAY (24*SECS_PER_HOUR)#define SECS_PER_YEAR (365*SECS_PER_DAY)#ifdef _WIN32#include <olectl.h>// Conversions between FILETIME and time_tstatic const UINT64 EPOCH_DIFF_DAYS = 134774;static const UINT64 EPOCH_DIFF_SECS = (EPOCH_DIFF_DAYS*SECS_PER_DAY);static const UINT64 SECS_TO_100NS = 10000000;static void TimetToFileTime( time_t t, LPFILETIME pft ){ UINT64 u = ((UINT64)t + EPOCH_DIFF_SECS) * SECS_TO_100NS; pft->dwLowDateTime = (DWORD)u; pft->dwHighDateTime = (DWORD)(u>>32);}static time_t FileTimeToTimet( LPFILETIME pft ){ UINT64 u = ((UINT64)pft->dwHighDateTime << 32) | ((UINT64)pft->dwLowDateTime); return (time_t)( u / SECS_TO_100NS - EPOCH_DIFF_SECS );}#endif /* _WIN32 *//* * To reproduce g_monthoffset using GNU date(2) and bash(1): * for N in 1 2 3 4 5 6 7 8 9 10 11 12; do * date -u --date="1/$N/1970" +%s * done * * To reproduce g_monthleapoffset, add SECS_PER_DAY to 2..11 */static const time_t g_monthoffset[12] = { 0, 2678400, 5097600, 7776000, 10368000, 13046400, 15638400, 18316800, 20995200, 23587200, 26265600, 28857600 };static const int g_monthleapoffset[12] = { 0, 2678400, 5184000, 7862400, 10454400, 13132800, 15724800, 18403200, 21081600, 23673600, 26352000, 28944000 };static const int g_monthdays[12] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };static const int g_monthleapdays[12] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };static const char* const g_wkday_names[7] = { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" };static const char* const g_weekday_names[7] = { "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" };static const char* const g_mon_names[12] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" };static const char* const g_month_names[12] = { "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" };static inline const char* wkday_to_str(int n){ return ( (n >= 0 && n < 7) ? g_wkday_names[n] : NULL );}static inline const char* weekday_to_str(int n){ return ( (n >= 0 && n < 7) ? g_weekday_names[n] : NULL );}static inline const char* mon_to_str(int n){ return ( (n >= 0 && n < 12) ? g_mon_names[n] : NULL );}static inline const char* month_to_str(int n){ return ( (n >= 0 && n < 12) ? g_month_names[n] : NULL );}static int weekday_from_string(const char* pStr){ int n; for (n = 0; n < 7; n++) { if (strncasecmp(g_wkday_names[n], pStr, 3) == 0) { return n; } } return -1;}static int month_from_string(const char* pStr){ int n; for (n = 0; n < 12; n++) { if (strncasecmp(g_mon_names[n], pStr, 3) == 0) { return n; } } return -1;}/* * We assume 32-bit signed time_t and disallow years prior to 1970 here. * Supporting 64-bit time_t and years prior to 1970 are not trivial, as * time_t values are commonly converted to UINT32 (eg. stat results). * * We also require input values to be within their legal intervals to avoid * normalization overhead. This is not required by mktime(3). */time_t mktime_gmt(struct tm* ptm){ time_t t = 0; if (ptm == NULL) { HX_ASSERT(FALSE); goto bail; } // Calculate seconds to beginning of year (including leap days) // eg. one leap day for 1973..1976, two for 1977..1980, etc. // Year 2000 was a leap year so the leap calculation is easy if (ptm->tm_year < 70 || ptm->tm_year > 137) { goto bail; } t = SECS_PER_YEAR * (ptm->tm_year-70) + SECS_PER_DAY * ((ptm->tm_year-69)/4); // Add seconds to beginning of day (including leap day, if needed) if (ptm->tm_mon < 0 || ptm->tm_mon > 11) { goto bail; } if (ptm->tm_year%4) { t += g_monthoffset[ptm->tm_mon]; if (ptm->tm_mday < 1 || ptm->tm_mday > g_monthdays[ptm->tm_mon]) { goto bail; } } else { t += g_monthleapoffset[ptm->tm_mon]; if (ptm->tm_mday < 1 || ptm->tm_mday > g_monthleapdays[ptm->tm_mon]) { goto bail; } } t += SECS_PER_DAY * (ptm->tm_mday - 1); // Add hours, minutes, seconds // Note: we allow up to 62 seconds per minute for "leap seconds" if (ptm->tm_hour < 0 || ptm->tm_hour > 23 || ptm->tm_min < 0 || ptm->tm_min > 59 || ptm->tm_sec < 0 || ptm->tm_sec > 61) { goto bail; } t += ptm->tm_hour*SECS_PER_HOUR + ptm->tm_min*SECS_PER_MIN + ptm->tm_sec; return t;bail: return INVALID_TIME_T;}// Win16 and WinCE lack strftime() so implement it here...#if defined(_WIN16) || defined(WIN32_PLATFORM_PSPC)/* * In all of the following make_xxx functions, the following hold true: * - If the destination length is too small to hold the result, the * buffer is not touched and pDest is not advanced. * - nLen is always updated using the length of the source string. * * Thus, we can detect overflow by checking nLen against nDestLen and the * NULL terminator is always placed at pDest with no overflow worries. */static void make_wkday(char*& pDest, size_t nDestLen, int n, size_t& nLen){ const char* pStr = wkday_to_str(n); if (pStr != NULL) { size_t nStrLen = strlen(pStr); if (nLen + nStrLen < nDestLen) { strcpy(pDest, pStr); /* Flawfinder: ignore */ pDest += nStrLen; } nLen += nStrLen; }}static void make_weekday(char*& pDest, size_t nDestLen, int n, size_t& nLen){ const char* pStr = weekday_to_str(n); if (pStr != NULL) { size_t nStrLen = strlen(pStr); if (nLen + nStrLen < nDestLen) { strcpy(pDest, pStr); /* Flawfinder: ignore */ pDest += nStrLen; } nLen += nStrLen; }}static void make_mon(char*& pDest, size_t nDestLen, int n, size_t& nLen){ const char* pStr = mon_to_str(n); if (pStr != NULL) { size_t nStrLen = strlen(pStr); if (nLen + nStrLen < nDestLen) { strcpy(pDest, pStr); /* Flawfinder: ignore */ pDest += nStrLen; } nLen += nStrLen; }}static void make_month(char*& pDest, size_t nDestLen, int n, size_t& nLen){ const char* pStr = month_to_str(n); if (pStr != NULL) { size_t nStrLen = strlen(pStr); if (nLen + nStrLen < nDestLen) { strcpy(pDest, pStr); /* Flawfinder: ignore */ pDest += nStrLen; } nLen += nStrLen; }}static void make_value(char*& pDest, size_t nDestLen, int n, size_t& nLen){ char szBuffer[16]; /* Flawfinder: ignore */ _itoa(n, szBuffer, 10); size_t nStrLen = strlen(szBuffer); if (nLen + nStrLen < nDestLen) { strcpy(pDest, szBuffer); /* Flawfinder: ignore */ pDest += nStrLen; } nLen += nStrLen;}size_t strftime16(char* pDest, size_t nDestLen, const char* pFormat, const struct tm* ptm){ size_t nLen = 0; if (pDest == NULL) { HX_ASSERT(FALSE); return 0; } pDest[0] = '\0'; if (pFormat == NULL) { return 0; } while (*pFormat && nLen < nDestLen) { if (*pFormat == '%' && *(pFormat+1) != '\0') { pFormat++; switch (*pFormat) { case 'a': // abbreviated weekday name make_wkday(pDest, nDestLen, ptm->tm_wday, nLen); break; case 'A': // full weekday name make_weekday(pDest, nDestLen, ptm->tm_wday, nLen); break; case 'b': // abbreviated month name make_mon(pDest, nDestLen, ptm->tm_wday, nLen); break; case 'B': // full month name make_month(pDest, nDestLen, ptm->tm_wday, nLen); break; case 'd': // day of month in decimal make_value(pDest, nDestLen, ptm->tm_mday, nLen); break; case 'H': // hour in 24-hr format make_value(pDest, nDestLen, ptm->tm_hour, nLen); break; case 'm': // month as decimal number make_value(pDest, nDestLen, ptm->tm_mon+1, nLen); break; case 'M': // minutes as decimal number make_value(pDest, nDestLen, ptm->tm_min, nLen); break; case 'S': // seconds as decimal number make_value(pDest, nDestLen, ptm->tm_sec, nLen); break; case 'y': // year without century make_value(pDest, nDestLen, ptm->tm_year, nLen); break; case 'Y': // year with century make_value(pDest, nDestLen, ptm->tm_year+1900, nLen); break; default: // add more options if needed break; } } else { if (nLen+1 < nDestLen) { *pDest = *pFormat; pDest++; } nLen++; } pFormat++; } *pDest = '\0'; return nLen;}#endif /* _WIN16 || WIN32_PLATFORM_PSPC */UTCTimeRep::UTCTimeRep(void){ m_szTime[0] = '\0'; fromUTCTime(time(NULL));}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -