⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 activewrap.cpp

📁 linux下的一款播放器
💻 CPP
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: activewrap.cpp,v 1.4.20.3 2004/07/09 01:48:15 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** *//**************************************************************************** *  *  activewrap.cpp * *	Wrapper classes for easy use of ActivePropUser Interface   * *	Possible TODOs:  *	    store list of active property names (set as inactive during destructor) *	    add interface to remove active properties *	    map active properties to wrapper users (ie multiple users per wrapper) *	    let caller set flags about what types of changes are supported, etc * *//**************************************************************************** * Defines *//**************************************************************************** * Includes */#include "hxtypes.h"#include "hxcom.h"#include "hxcomm.h"#include "hxerror.h"#include "hxassert.h"#include "hxmon.h"#include "hxslist.h"#include "hxbuffer.h"#include "hxstrutl.h"#include "hxmap.h"#include "activewrap.h"#ifdef _DEBUG#undef HX_THIS_FILE             static const char HX_THIS_FILE[] = __FILE__;#endifCActivePropWrapper::CActivePropWrapper()	: m_lRefCount(0)	, m_pContext(NULL)	, m_pUser(NULL)	, m_pClassFactory(NULL){};                             HX_RESULTCActivePropWrapper::Init(IUnknown* /*IN*/ pContext, CActivePropWrapperUser * pUser){    if (!(pUser||pContext))     {	return HXR_FAILED;    }    m_pContext = pContext ;    m_pContext->AddRef();    m_pUser = pUser;    m_pUser->AddRef();    HX_RESULT theErr = HXR_OK;        theErr = m_pContext->QueryInterface(IID_IHXCommonClassFactory, 	(void**)&m_pClassFactory);    if (theErr != HXR_OK || m_pClassFactory == NULL)    {        theErr = HXR_INVALID_PARAMETER;        goto bail;    }bail:    return theErr;};                             /* Add the registry property pPropName to the list of Active properties*/HX_RESULTCActivePropWrapper::SetAsActive(const char* pPropName){    IHXRegistry* pRegistry = 0;    IHXActiveRegistry* pActiveReg = 0;    HX_RESULT theErr = m_pContext->QueryInterface(IID_IHXRegistry, 	(void**)&pRegistry);    if (theErr != HXR_OK || pRegistry == NULL)    {        theErr = HXR_INVALID_PARAMETER;        goto bail;    }    theErr = pRegistry->QueryInterface(IID_IHXActiveRegistry, 	(void**) &pActiveReg);    if (theErr != HXR_OK || pActiveReg == NULL)    {        theErr = HXR_INVALID_PARAMETER;        goto bail;    }    theErr = pActiveReg->SetAsActive(pPropName, this);    bail:    HX_RELEASE(pActiveReg);    HX_RELEASE(pRegistry);    return theErr ;}HX_RESULTCActivePropWrapper::Done(){    if (m_pUser)    {        m_pUser->Release();        m_pUser = NULL;    }    return HXR_OK;}CActivePropWrapper::~CActivePropWrapper(){    HX_RELEASE(m_pContext);    if (m_pUser)    {        m_pUser->Release();        m_pUser = NULL;    }}    // IUnknown COM Interface Methods/**************************************************************************** *  IUnknown::AddRef                                            ref:  hxcom.h * *  This routine increases the object reference count in a thread safe *  manner. The reference count is used to manage the lifetime of an object. *  This method must be explicitly called by the user whenever a new *  reference to an object is used. */STDMETHODIMP_(UINT32)CActivePropWrapper::AddRef(){    return InterlockedIncrement(&m_lRefCount);}   /**************************************************************************** *  IUnknown::Release                                           ref:  hxcom.h * *  This routine decreases the object reference count in a thread safe *  manner, and deletes the object if no more references to it exist. It must *  be called explicitly by the user whenever an object is no longer needed. */STDMETHODIMP_(UINT32)CActivePropWrapper::Release(){    if (InterlockedDecrement(&m_lRefCount) > 0)    {        return m_lRefCount;    }        delete this;    return 0;}   /**************************************************************************** *  IUnknown::QueryInterface                                    ref:  hxcom.h * *  This routine indicates which interfaces this object supports. If a given *  interface is supported, the object's reference count is incremented, and *  a reference to that interface is returned. Otherwise a NULL object and *  error code are returned. This method is called by other objects to *  discover the functionality of this object. */STDMETHODIMPCActivePropWrapper::QueryInterface(REFIID riid, void** ppvObj){	QInterfaceList qiList[] =	{		{ GET_IIDHANDLE(IID_IUnknown), (IUnknown*) this },		{ GET_IIDHANDLE(IID_IHXActivePropUser), (IHXActivePropUser*) this },	};	    return QIFind(qiList, QILISTSIZE(qiList), riid, ppvObj);   } /************************************************************************* IHXActivePropUser::SetActiveInt**    Async request to set int pName to ul.*/STDMETHODIMPCActivePropWrapper::SetActiveInt(const char* pName,                        UINT32 ul,                        IHXActivePropUserResponse* pResponse){    //printf("SetActiveInt: %s = %d\n", pName, ul);    if (!m_pUser) return HXR_OK;    CHXString strName(pName);    CHXString strErr;        HX_RESULT res = m_pUser->PropUpdated(strName, ul, strErr);    IHXBuffer* pBuf = NULL;	    if (! strErr.IsEmpty())    {	pBuf = MakeBufString((const char*) strErr);    }    pResponse->SetActiveIntDone(res,	pName, 	ul,	pBuf ? &pBuf : 0,	pBuf ? 1 : 0);    HX_RELEASE(pBuf);    return HXR_OK;}/************************************************************************* IHXActivePropUser::SetActiveStr**    Async request to set string pName to string in pBuffer.*/STDMETHODIMPCActivePropWrapper::SetActiveStr(const char* pName,                        IHXBuffer* pBuffer,                        IHXActivePropUserResponse* pResponse){    //printf("SetActiveStr: %s = %s\n", pName, (const char *)pBuffer->GetBuffer());    if (!m_pUser) return HXR_OK;    CHXString strName(pName);    CHXString strVal((const char *)pBuffer->GetBuffer());    CHXString strErr;    HX_RESULT res = m_pUser->PropUpdated(strName, strVal, strErr);    IHXBuffer* pBuf = NULL;	    if (! strErr.IsEmpty())    {        pBuf = MakeBufString((const char*) strErr);    }        if ((res == HXR_OK) &&	 (strVal != (const char *)pBuffer->GetBuffer()))    {        pBuffer->Set((const UCHAR *)(const char *)strVal, strVal.GetLength());    }	    pResponse->SetActiveStrDone(res,	pName, 	pBuffer, 	pBuf ? &pBuf : 0,	pBuf ? 1 : 0);    HX_RELEASE(pBuf);	    return HXR_OK;}/************************************************************************* IHXActivePropUser::SetActiveBuf**    Async request to set buffer pName to buffer in pBuffer.*	 reUse SetActiveStr*/STDMETHODIMPCActivePropWrapper::SetActiveBuf(const char* pName,                            IHXBuffer* pBuffer,                            IHXActivePropUserResponse* pResponse){    //printf("SetActiveBuf is Calling ");    return SetActiveStr(pName, pBuffer, pResponse);}/************************************************************************* IHXActivePropUser::DeleteActiveProp**       Async request to delete the active property.*/STDMETHODIMPCActivePropWrapper::DeleteActiveProp(const char* pName,                        IHXActivePropUserResponse* pResponse){    //printf("DeleteActiveProp: %s\n", pName);    if (!m_pUser) return HXR_OK;    CHXString strName(pName);    CHXString strErr;        HX_RESULT res = m_pUser->PropDeleted(strName, strErr);    IHXBuffer* pBuf = NULL;	    if (! strErr.IsEmpty())    {        pBuf = MakeBufString((const char*) strErr);    }        pResponse->DeleteActivePropDone(res,	pName, 	pBuf ? &pBuf : 0,	pBuf ? 1 : 0);    HX_RELEASE(pBuf);	    return HXR_OK;}IHXBuffer*CActivePropWrapper::MakeBufString(const char* pText){    IHXBuffer* pRet;    m_pClassFactory->CreateInstance(CLSID_IHXBuffer, (void**)&pRet);    pRet->Set((const unsigned char*)pText, strlen(pText) + 1);    return pRet;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -