⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 xmlesc.h

📁 linux下的一款播放器
💻 H
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: xmlesc.h,v 1.5.2.1 2004/07/19 21:04:07 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#ifndef _XMLCONV_H_#define _XMLCONV_H_#include "growingq.h"/**************************************************************************** *  $Id: xmlesc.h,v 1.5.2.1 2004/07/19 21:04:07 hubbe Exp $ * *  NAME:	xmlesc.h * *  CLASS * 	CEscapeXMLtoHTML * *  DESCRIPTION: *      The declaration for a class that escapes all the XML characters *      that are not printable in HTML.  A IHXBuffer is passed into the *      class on throgh the Convert Method.  This is a pure virtual  *      class. The CheckTag, and OnTag functions must be implemented by  *      a child class. *		 ***************************************************************************/// XXXJHUG - I can't find a max tag length in the XML specs - this works// with everything we parse so far.const UINT32 MAXTAGLEN = 128;class CEscapeXMLtoHTML {public:    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  CEscapeXMLtoHTML(pServerUrl, pOurPath)     *     *  PARAMETERS:     *	    pServerUrl	Full url to the server including the template file.     *	    pOurPath	The Relative path of the file currently being parsed     *							no ending /     *	    bMangleLinks    - to mangle or not     *	    bUseStyles	    - output in styles or regular HTML     *	    pHotTags	    - The tags that we will call OnTag For.     *	    pDefaultView    - The default viewsource to use for remote rstp     *			      links ":port/viewmount/viewfile"     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    CEscapeXMLtoHTML(IHXValues* pOptions, const char** pHotTags);        /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  ~CEscapeXMLtoHTML()     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    virtual ~CEscapeXMLtoHTML();        /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  Convert(pXMLsrc)     *     *  PARAMETERS:     *	    pXMLsrc	Pointer to a IHXBuffer containing the src of xml to     *			be converted     *	RETURNS     *	    A new IHXBuffer containing the parsed XML data ready to be      *	    displayed in an HTML browser.     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    STDMETHOD(Convert)(THIS_ IHXBuffer* pBufIn, REF(IHXBuffer*) pOutBuffer);        /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  StatesEnum     *     *	DESCRIPTION:     *		enum descibing the different stages of the Parse Function     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    enum StatesEnum { IN_CONTENT        , IN_DOC_TYPE_DEC        , IN_DOC_TYPE_DEC_TAG        , IN_CDATA	, ABOUT_TO_BEGIN_TAG	, IN_BEGIN_TAG	, IN_TAG	, BEGIN_ATTRIBUTE_VALUE	, IN_QUOTED_ATTRIBUTE_VALUE	, IN_BROKEN_QUOTED_ATTRIBUTE_VALUE	, IN_UNQUOTED_ATTRIBUTE_VALUE	, IN_COMMENT	, IN_AMPERSAND_THINGY     };protected:    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  struct DataObject     *     *	DESCRIPTION:     *		structure that defines the state of the Parse function     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    class DataObject {    public:	DataObject() : state(IN_CONTENT), bInBrokenXML(FALSE), 	    bPushChar(FALSE), tag_index(0), bInProcessingInstructions(FALSE),	    bInInternalComment(FALSE), bInDataSection(FALSE), cQuote('\0') {}	StatesEnum state;	BOOL bInBrokenXML;	BOOL bPushChar;	char tag[MAXTAGLEN]; /* Flawfinder: ignore */	UINT32 tag_index;	BOOL bInProcessingInstructions;	BOOL bInInternalComment;	BOOL bInDataSection;	char cQuote;    };    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  PURE VIRTUAL FUNCTION     *	OnTag(cp, pObj, queue)     *     *  PARAMETERS:     *     *	cp	Pointer to a character string.  It points to the first     *		letter of the tag name that we want to do special stuff to     *  ulLen	Length to end of cp so we don't overrun the buffer     *	pObj	The current state of the Parse Function, this can be used     *		to continue parsing.     *	queue	The queue to push the output to.     *     *  DESCRIPTION:     *	    This method is implemented by a specialized class to take care of     *	    a tag that returned true from the CheckTag call.  It returns how     *	    many characters it ate off the cp.     *	    This function can recursivly call the parse function to keep the     *	    formatting consistant.     *     *  RETURNS     *	    UINT32     *		number of characters used off cp, thus the position can be     *		adjusted after the function returns     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    virtual UINT32 OnTag(const UCHAR* cp, UINT32 ulLen, DataObject* pObj,	    CBigByteGrowingQueue* queue) = 0;    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  PURE VIRTUAL FUNCTION     *	PushHeader(queue)     *     *  PARAMETERS:     *	queue	The queue to push the output to.     *     *  DESCRIPTION:     *	    This method is implemented by classes that are derived from us.     *	It allows the class to output type specific information before the     *  Actual XML source is presented.     *     *  RETURNS     *	    void     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    virtual void PushHeader(CBigByteGrowingQueue* queue) = 0;    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *	PushCommonHeader(queue)     *     *  PARAMETERS:     *	queue	The queue to push the output to.     *     *  DESCRIPTION:     *	    This method outputs the common information for files.  It usually     *	should be called from PushHeader after the file specific information     *	has been queued.     *     *  RETURNS     *	    void     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    void PushCommonHeader(CBigByteGrowingQueue* queue);    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  Parse(pIn, ulLen, pQueue, pObj)     *     *  PARAMETERS:     *     *	pIn	The string to be parsed.     *	ulLen	How far to parse through pIn     *	pQueue	The output Queue to push onto     *	pObj	The state object.  This is used to start the queue from a     *		given state.     *     *  DESCRIPTION:     *     *	    This function walks through the string one character at a time.     *	    Every tag is checked with the CheckTag(...) function to see if it     *	    needs special attention.  If so the OnTag(...) function is      *	    called.  This function will be implemented in a child class that     *	    will replace the tag with parsed imput returning how far along      *	    pIn it made it.     *     *	    This function is designed such that Inherited classes can     *	    recusivly call it to parse thier stream from the given state.     *     *  RETURNS     *	    void     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    void Parse(const UCHAR* pIn, UINT32 ulLen, CBigByteGrowingQueue* pQueue,						     DataObject* pObj);    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *  WrapAttributeWithHREF (cp, pObj, pQueue, pAttribute)     *     *  PARAMETERS:     *     *  cp	Pointer to a character string.  It points to the first     *		letter of the tag name that we want to do special stuff to     *  ulLen	Length to end of cp so we don't overrun the buffer     *  pObj	The current state of the Parse Function, this can be used     *		to continue parsing.     *  queue	The queue to push the output to.     *  pAttribute	The attribute we want to wrap.     *     *  DESCRIPTION:     *	    This method will take the given cp and wrap the given attribute     *	with an HREF.  It will be used by Inherited classes in their OnTag     *	Function     *     *  RETURNS     *	UINT32     *	    number of characters used off cp, thus the position can be     *	    adjusted after the function returns     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    UINT32 WrapAttributeWithHREF(const UCHAR* cp,	UINT32 ulLen, DataObject* pObj, CBigByteGrowingQueue* pQueue,	const char* pAttribute);#ifdef HYPER_LINKING_HREFS_XML    UINT32 LinkHREF(const UCHAR* cp,	UINT32 ulLen, DataObject* pObj, CBigByteGrowingQueue* pQueue);#endif/*___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Helper Methods:  These methods are used to help witht the implentation of *		    OnTag function *___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    BOOL m_bMangleLinks;        char* m_pOurPath;    char* m_pFileName;    char* m_pRamGen;    ULONG32 m_ulModDate;    ULONG32 m_ulFileSize;private:    /*_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     *	CheckTag(pObj)     *     *  PARAMETERS:     *	pObj	The State object.  It contains the tag name.     *     *  DESCRIPTION:     *	    This method checks cp to see if it is the start of a tag we are     *	    looking     *  RETURNS     *	    BOOL     *		TRUE if we want OnTag called, or FALSE if we will ignor this     *		tag     *_______________________________________________________________________     *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/    BOOL CheckTag(DataObject* pObj);        BOOL PushOpenningHREF(const UCHAR* cp, CBigByteGrowingQueue* pQueue, char cEndQuote);    void PushEndingHREF(CBigByteGrowingQueue* pQueue);    UINT32 PushMangledDisplayedPath(const UCHAR* cp, 	    CBigByteGrowingQueue* pQueue, char cEndQuote);    char* EncryptParameter(char* pPath);    UCHAR* GetParameter(const UCHAR* cp, UINT32 ulNameLen, BOOL bFullPath = FALSE);    void BeginColorTag (CBigByteGrowingQueue* qu, DataObject *pObj);    void EndColorTag (CBigByteGrowingQueue* qu, DataObject *pObj);    const char** m_pEscapeStrings;    const char** m_pHotTags;        char* m_pDefaultView;    char* m_pServerUrl;        enum m_enumTags    {	BeginTagMarkup,	EndTagMarkup,	BeginTagNameMarkup,	EndTagNameMarkup,	BeginAttributeValueMarkup,	EndAttributeValueMarkup,	BeginBrokenAttributeMarkup,	EndBrokenAttributeMarkup,	BeginCommentMarkup,	EndCommentMarkup,	BeginAmpersandThingyMarkup,	EndAmpersandThingyMarkup,	BeginHREF,        EndHREF,        BeginProcessingInstructions,        EndProcessingInstructions,        BeginCDATA,        EndCDATA,        BeginDTD,        EndDTD    };    static const char* const m_pDefaultTags[20];    static const char* const m_pStyleTags[20];};#endif // _XMLCONV_H_

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -