⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cunixf.cpp

📁 linux下的一款播放器
💻 CPP
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: cunixf.cpp,v 1.4.32.3 2004/07/09 01:44:23 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#include <stdio.h>#include <sys/stat.h>#include <sys/types.h>#include <fcntl.h>#include <unistd.h>#include <errno.h>#include "chxdataf.h"#include "cunixf.h"#include "hxheap.h"#include "hxresult.h"#if !defined _VXWORKS && !defined __QNXNTO__extern int errno;#endif#define  HX_FILE_NOT_OPEN    -1000CHXDataFile*CHXDataFile::Construct (UINT32 ulFlags, IUnknown** ppCommonObj){    return new CUnixFile;}// CHXFile should set the file reference to a value// indicating the file is not openCUnixFile::CUnixFile (void){        // set FD to indicate file is not open        mFD = HX_FILE_NOT_OPEN;        mLastError = HXR_OK;}// ~CHXFile should close the file if it is openCUnixFile::~CUnixFile(void){         // close the file if it is open        if ( mFD > 0 )        {           close( mFD );        }}// Following comments and code of GetSize were directly taken from the // windows implementation ../win/cwinfile.cpp// Simply uses stat to get the size of the file in bytes.  If the file// is closed, it will still work.ULONG32 CUnixFile::GetSize(void){    struct stat filestats;    if (mFD >= 0)    {        fstat(mFD, &filestats);        return filestats.st_size;    }    return 0;}// Create a file with the specified mode// Closes the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT CUnixFile::Create(const char *filename, UINT16 mode, BOOL textflag){        // close previous file if necessary        if ( mFD > 0 )            close( mFD );        // create file        mLastError = HXR_OK;        if ( ( mFD = creat( filename, mode ) ) < 0 )        {           mLastError = errno;           return HXR_DOC_MISSING;        }        return HXR_OK;}// Open a file with the specified mode// Closes the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT CUnixFile::Open(const char *filename, UINT16 mode, BOOL textflag){        // close previous file if necessary        if ( mFD > 0 )            close( mFD );        // open file        mLastError = HXR_OK;#ifndef _VXWORKS /* VXWORKS uses FAT32 */#define OPENFLAGS (S_IREAD | S_IWRITE)#else#endif        if ( ( mFD = open( filename, mode, OPENFLAGS ) ) < 0 )        {           mLastError = errno;           return HXR_DOC_MISSING;        }        // change permissions to allow everyone to read the file and owner to write	// only if I have to create this file#if !defined(_VXWORKS) && !defined(_BEOS)	if ( mode & O_CREAT )        fchmod( mFD, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH );#endif        return HXR_OK;}// Close the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT CUnixFile::Close(void){        // close previous file if necessary        if ( mFD > 0 )        {           mLastError = HXR_OK;              if ( close( mFD ) < 0 )           {              mLastError = errno;              return HXR_INVALID_FILE;           }         return HXR_OK;        }        return HXR_INVALID_FILE;}HX_RESULT CUnixFile::Delete(const char* pFilename){    if(mFD > 0)    {	close(mFD);    }    mLastError = HXR_OK;    if(unlink(pFilename))    {	if(errno == EACCES)	{	    mLastError = HXR_ACCESSDENIED;	}	else	{	    mLastError = HXR_DOC_MISSING;	}    }    return mLastError;}// Seek moves the current file position to the offset from the fromWhere// specifier returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT CUnixFile::Seek(ULONG32 offset, UINT16 fromWhere){        if ( mFD > 0 )        {           mLastError = HXR_OK;                  if ( lseek( mFD, offset, fromWhere ) < 0 )           {              mLastError = errno;              return HXR_INVALID_FILE;           }         return HXR_OK;        }      return HXR_INVALID_FILE;}// Rewind sets the file position to the start of file// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT CUnixFile::Rewind(void){        if ( mFD > 0 )        {           mLastError = HXR_OK;                  if ( lseek( mFD, 0, SEEK_SET ) < 0 )           {              mLastError = errno;              return HXR_INVALID_FILE;           }         return HXR_OK;        }        return HXR_INVALID_FILE;}// Tell returns the current file position// returns HXR_OK or -1 if an error occurredULONG32 CUnixFile::Tell(void){           long offset = -1;        if ( mFD > 0 )        {           mLastError = HXR_OK;                // the tell() function will consistently generate a warning          // and I haven't figured out how to fix that yet/****           if ((offset = tell( mFD )) < 0 )           {              mLastError = errno;           }****/			// so we do this instead....			if ((offset = lseek( mFD, 0, SEEK_CUR )) < 0 )			{				mLastError = errno;			}        }        return (ULONG32)offset;}/*      Read reads up to count bytes of data into buf.        returns the number of bytes read, EOF, or -1 if the read failed */ULONG32 CUnixFile::Read (char *buf, ULONG32 count){	int ncnt = -1;           // number of bytes read	if ( mFD > 0 ) 	{ 		mLastError = HXR_OK;		ULONG32 tmpCheck = Tell();		if ( ( ncnt = read( mFD, buf, count ) ) < 0 )		{			mLastError = errno;		}	}	return (ULONG32)ncnt;}/*      Write writes up to count bytes of data from buf.        returns the number of bytes written, or -1 if the write failed */ULONG32 CUnixFile::Write(const char *buf, ULONG32 count){        int ncnt = -1;           // number of bytes written      if ( mFD > 0 )      { mLastError = HXR_OK;          if ( ( ncnt = write( mFD, buf, count ) ) < 0 )          {             mLastError = errno;          }      }        return (ULONG32)ncnt;}BOOL CUnixFile::GetTemporaryFileName(const char *tag, char* name, UINT32 ulBufLen){#ifdef _MAC_UNIX	// GR 7/15/03 other Unix implementations should probably use this (or tempnam)	// instead of tmpnam		const int kBuffsize = 1024;	char buff[kBuffsize];	int count = snprintf(buff, kBuffsize, "/tmp/%s_XXXXXX", tag);	if (count > 0 && count < kBuffsize)	{		// replace the X's with digits		if (mktemp(buff) != NULL)		{			strncpy(name, buff, ulBufLen);			return TRUE;		}	}	return FALSE;	#else	if (tmpnam(name))		return TRUE;	else		return FALSE;#endif}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -