📄 copwavef.cpp
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: copwavef.cpp,v 1.3.28.3 2004/07/09 01:44:17 hubbe Exp $ * * * Portions Copyright (c) 1995-2002 RealNetworks, Inc. All Rights Reserved. * * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks. You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL. Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. * * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. * * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. * * Technology Compatibility Kit Test Suite(s) Location: * http://www.helixcommunity.org/content/tck * * Contributor(s): * * ***** END LICENSE BLOCK ***** */#include "hlxclib/stdio.h"#include "hlxclib/sys/stat.h"#include "hlxclib/sys/types.h"#include "hlxclib/fcntl.h"//#include "hlxclib/errno.h"#include "chxdataf.h"#include "copwavef.h"#include "hxheap.h"#include "hxresult.h"#define HX_FILE_NOT_OPEN -1000/// TB correctly done //int errno = 1;CHXDataFile*CHXDataFile::Construct (UINT32 ulFlags, IUnknown** ppCommonObj){ return new COpenwaveFile;}// CHXFile should set the file reference to a value// indicating the file is not openCOpenwaveFile::COpenwaveFile (void){ // set FD to indicate file is not open mFD = HX_FILE_NOT_OPEN; mLastError = HXR_OK;}// ~CHXFile should close the file if it is openCOpenwaveFile::~COpenwaveFile(void){ // close the file if it is open if ( mFD > 0 ) { //close( mFD ); OpFsClose( mFD ); }}// Following comments and code of GetSize were directly taken from the // windows implementation ../win/cwinfile.cpp// Simply uses stat to get the size of the file in bytes. If the file// is closed, it will still work.ULONG32 COpenwaveFile::GetSize(void){ OpFsStatStruct filestats; if (mFD >= 0) { if (OpFsStat(mFName, &filestats) == kOpFsErrOk) { return filestats.size; } } return 0;}// Create a file with the specified mode// (XXXSAB: does Openwave even have a read-only bit/file permissions for// 'mode'?)// Closes the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT COpenwaveFile::Create(const char *filename, UINT16 mode, BOOL textflag){ // close previous file if necessary if ( mFD > 0 ) { //close( mFD ); OpFsClose( mFD ); } // create file mLastError = HXR_OK; // if ( ( mFD = creat( filename, mode ) ) < 0 ) mFD = OpFsOpen(filename, mode, 0); if (mFD == kOpFsErrAny) { mFD = HX_FILE_NOT_OPEN; mLastError = mFD; return HXR_DOC_MISSING; } mFName = filename; return HXR_OK;}// Open a file with the specified mode// Closes the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT COpenwaveFile::Open(const char *filename, UINT16 mode, BOOL textflag){ // close previous file if necessary if ( mFD > 0 ) { // close( mFD ); OpFsClose( mFD ); } // open file mLastError = HXR_OK; mFD = OpFsOpen(filename, kOpFsFlagWrOnly | kOpFsFlagCreate, 0); { mFD = HX_FILE_NOT_OPEN; mLastError = mFD; return HXR_DOC_MISSING; } mFName = filename; return HXR_OK;}// Close the previous file if it was open// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT COpenwaveFile::Close(void){ // close previous file if necessary if ( mFD > 0 ) { mLastError = HXR_OK; //if ( close( mFD ) < 0 ) if (OpFsClose( mFD ) != kOpFsErrOk ) { mLastError = HXR_INVALID_FILE; return HXR_INVALID_FILE; } return HXR_OK; } return HXR_INVALID_FILE;}HX_RESULT COpenwaveFile::Delete(const char* pFilename){ if(mFD > 0) { //close(mFD); OpFsClose( mFD ); } mLastError = HXR_OK; if(OpFsRemove(pFilename) == kOpFsErrAny) { mLastError = HXR_ACCESSDENIED; } return mLastError;}// Seek moves the current file position to the offset from the fromWhere// specifier returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT COpenwaveFile::Seek(ULONG32 offset, UINT16 fromWhere){ if ( mFD > 0 ) { mLastError = HXR_OK; //if ( lseek( mFD, offset, fromWhere ) < 0 )' if (OpFsSeek( mFD, (OpFsSize)offset, fromWhere) == kOpFsErrAny) { mLastError = HXR_INVALID_FILE; return HXR_INVALID_FILE; } return HXR_OK; } return HXR_INVALID_FILE;}// Rewind sets the file position to the start of file// returns HXR_OK or HXR_INVALID_FILE if an error occurredHX_RESULT COpenwaveFile::Rewind(void){ if ( mFD > 0 ) { mLastError = HXR_OK; //if ( lseek( mFD, 0, SEEK_SET ) < 0 ) if (OpFsSeek( mFD, (OpFsSize)0, SEEK_SET) == kOpFsErrAny) { mLastError = HXR_INVALID_FILE; return HXR_INVALID_FILE; } return HXR_OK; } return HXR_INVALID_FILE;}// Tell returns the current file position// returns HXR_OK or -1 if an error occurredULONG32 COpenwaveFile::Tell(void){ long offset = -1; if ( mFD > 0 ) { mLastError = HXR_OK; // the tell() function will consistently generate a warning // and I haven't figured out how to fix that yet /**** if ((offset = tell( mFD )) < 0 ) { mLastError = errno; } ****/ // so we do this instead.... //if ((offset = lseek( mFD, 0, SEEK_CUR )) < 0 ) if (OpFsSeek( mFD, (OpFsSize)0, SEEK_CUR) == kOpFsErrAny) { mLastError = HXR_INVALID_FILE; } } return (ULONG32)offset;}/* Read reads up to count bytes of data into buf.returns the number of bytes read, EOF, or -1 if the read failed */ULONG32 COpenwaveFile::Read (char *buf, ULONG32 count){ //int ncnt = -1; // number of bytes read OpFsSize ncnt = kOpFsErrAny; if ( mFD > 0 ) { mLastError = HXR_OK; ULONG32 tmpCheck = Tell(); //if ( ( ncnt = read( mFD, buf, count ) ) < 0 ) if (( ncnt = OpFsRead( mFD, buf, count)) == kOpFsErrAny) { mLastError = HXR_INVALID_FILE; } } return (ULONG32)ncnt;}/* Write writes up to count bytes of data from buf.returns the number of bytes written, or -1 if the write failed */ULONG32 COpenwaveFile::Write(const char *buf, ULONG32 count){ // int ncnt = -1; // number of bytes written OpFsSize ncnt = kOpFsErrAny; if ( mFD > 0 ) { mLastError = HXR_OK; //if ( ( ncnt = write( mFD, buf, count ) ) < 0 ) if (( ncnt = OpFsWrite( mFD, buf, count)) == kOpFsErrAny) { mLastError = HXR_INVALID_FILE; } } return (ULONG32)ncnt;}BOOL COpenwaveFile::GetTemporaryFileName(const char *tag, char* name, UINT32 ulBufLen){ // TBF#ifdef Commented_out_code_20030422_132559 if (tmpnam(name)) return TRUE; else#endif /* Commented_out_code_20030422_132559 */ return FALSE;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -