⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 bufdataf.cpp

📁 linux下的一款播放器
💻 CPP
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: bufdataf.cpp,v 1.9.32.3 2004/07/09 01:44:51 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#include "hxtypes.h"#include "hlxclib/stdio.h"#if defined(_UNIX)#include <unistd.h>#endif	// _UNIX#include "hlxclib/windows.h"#include "hlxclib/sys/stat.h"#include "hlxclib/sys/types.h"#include "hlxclib/fcntl.h"#include "hlxclib/errno.h"#include "hlxosstr.h"#include "hxcom.h"#include "hxresult.h"#include "ihxpckts.h"#include "hxbuffer.h"#include "debug.h"#include "hxdataf.h"#include "bufdataf.h"///////////////////////////////////////////////////////////////////////////  Method://      BufferedDataFile::QueryInterface//  Purpose://      Implement this to export the interfaces supported by your//      object.//STDMETHODIMPBufferedDataFile::QueryInterface(REFIID riid, void** ppvObj){    if (IsEqualIID(riid, IID_IHXDataFile))    {        AddRef();        *ppvObj = (IHXDataFile*)this;        return HXR_OK;    }        *ppvObj = NULL;    return HXR_NOINTERFACE;}   ///////////////////////////////////////////////////////////////////////////  Method://      BufferedDataFile::AddRef//  Purpose://      Everyone usually implements this the same... feel free to use//      this implementation.//STDMETHODIMP_(ULONG32)BufferedDataFile::AddRef(){    DPRINTF(0x5d000000, ("UBDF::AddRef() = %ld\n", m_lRefCount+1));    return InterlockedIncrement(&m_lRefCount);}   ///////////////////////////////////////////////////////////////////////////  Method://      BufferedDataFile::Release//  Purpose://      Everyone usually implements this the same... feel free to use//      this implementation.//STDMETHODIMP_(ULONG32)BufferedDataFile::Release(){    DPRINTF(0x5d000000, ("UBDF::Release() = %ld\n", m_lRefCount-1));    if (InterlockedDecrement(&m_lRefCount) > 0)    {        return m_lRefCount;    }        delete this;    return 0;}   BufferedDataFile::BufferedDataFile()		  : m_lRefCount(0)		  , m_ulLastError(HXR_OK)		  , m_pFilename(new CHXBuffer)		  , m_pFile(0){    m_pFilename->AddRef();    DPRINTF(0x5d000000, ("BufferedDataFile::BufferedDataFile()\n"));}// ~CHXFile should close the file if it is openBufferedDataFile::~BufferedDataFile(){     // close the file if it is open    if (m_pFile)    {       fclose(m_pFile);       m_pFile = 0;    }    HX_RELEASE(m_pFilename);    DPRINTF(0x5d000000, ("BufferedDataFile::~BufferedDataFile()\n"));}/* *  IHXDataFile methods *//* Bind DataFile Object with FileName */STDMETHODIMP_(void)BufferedDataFile::Bind(const char* pFilename){    m_pFilename->Set((BYTE *)pFilename, strlen(pFilename)+1);    DPRINTF(0x5d000000, ("BufferedDataFile::Bind(%s)\n", 	    (const char *)m_pFilename->GetBuffer()));}/* Creates a datafile using the specified mode * uOpenMode --- File Open mode - HX_FILEFLAG_READ/HX_FILEFLAG_WRITE/HX_FILEFLAG_BINARY */STDMETHODIMPBufferedDataFile::Open(UINT16 uOpenMode){    return _Create(uOpenMode, FALSE);}STDMETHODIMPBufferedDataFile::Create(UINT16 uOpenMode){    return _Create(uOpenMode, TRUE);}/* Open will open a file with the specified mode */HX_RESULTBufferedDataFile::_Create(UINT16 uOpenMode, BOOL bCreateFile){    HX_RESULT retVal = HXR_OK;    m_ulLastError = HXR_OK;    DPRINTF(0x5d000000, ("BufferedDataFile::Open()\n"));    char modeflags[4]; /* Flawfinder: ignore */    // close previous file if necessary    if (m_pFile)    {	fclose(m_pFile);	m_pFile = NULL;    }    modeflags[0] = 'r';    modeflags[1] = 0;    modeflags[2] = 0; #ifdef HELIX_CONFIG_ALLFILES_BINARY    uOpenMode |= HX_FILEFLAG_BINARY;#endif	// HELIX_CONFIG_ALLFILES_BINARY    if (((uOpenMode & HX_FILEFLAG_NOTRUNC) == 0) && bCreateFile)    {	// Overwrite any existing file if in the way	modeflags[0] = 'w';	if (uOpenMode & HX_FILEFLAG_READ)	{	    modeflags[1] = '+';	}    }    else    {	modeflags[0] = 'r';	if (uOpenMode & HX_FILEFLAG_WRITE)	{	    modeflags[1] = '+';	}    }    if (uOpenMode & HX_FILEFLAG_BINARY)    {	strcat(modeflags, "b"); /* Flawfinder: ignore */    }    // open file    if ((m_pFilename == NULL) ||	(m_pFilename->GetSize() == 0))    {	retVal = HXR_FAIL;    }    if (retVal == HXR_OK)    {	m_pFile = fopen((const char *) m_pFilename->GetBuffer(), modeflags);	if (m_pFile)	{	    if (bCreateFile && (uOpenMode & HX_FILEFLAG_NOTRUNC))	    {		fclose(m_pFile);		m_pFile = NULL;		retVal = HXR_FAIL;		m_ulLastError = (UINT32)HXR_FAIL;	    }	}	else	{	    retVal = HXR_DOC_MISSING;	    m_ulLastError = (UINT32)HXR_DOC_MISSING;	}    }    if (retVal == HXR_DOC_MISSING)    {	if (bCreateFile && (uOpenMode & HX_FILEFLAG_NOTRUNC))	{	    // This a recovery on NO_TRUNC file creation	    // Open failed so attempt to create file	    modeflags[0] = 'w';	    modeflags[1] = 0;	    if (uOpenMode && HX_FILEFLAG_READ)	    {		modeflags[1] = '+';		modeflags[2] = 0;	    }	    if (uOpenMode & HX_FILEFLAG_BINARY)	    {		strcat(modeflags, "b"); /* Flawfinder: ignore */	    }	    m_pFile = fopen((const char *) m_pFilename->GetBuffer(), modeflags);	    if (m_pFile)	    {		retVal = m_ulLastError = HXR_OK;	    }	    else	    {		retVal = HXR_FAIL;		m_ulLastError = (UINT32)retVal;	    }	}    }        DPRINTF(0x5d000000, ("BDF::Open() -- %s\n", modeflags));    return retVal;}/* Close closes a file  * If the reference count on the IHXDataFile object is greater than 1,  * then the underlying file cannot be safely closed, so Close() becomes  * a noop in that case. Close it only when the object is destroyed.  * This would be safe, but could lead to a file descriptor leak. */STDMETHODIMPBufferedDataFile::Close(){    if (m_pFile)    {	fclose(m_pFile);	m_pFile = 0;    }    return HXR_OK;}/* Name returns the currently bound file name in FileName. * and returns TRUE, if the a name has been bound.  Otherwise * FALSE is returned. */STDMETHODIMP_(BOOL)BufferedDataFile::Name(REF(IHXBuffer*) pFileName){    BOOL bRetVal = FALSE;    if (m_pFilename && (m_pFilename->GetSize() != 0))    {	pFileName = m_pFilename;	m_pFilename->AddRef();	bRetVal = TRUE;    }    return bRetVal;}/* * IsOpen returns TRUE if file is open.  Otherwise FALSE. */inline BOOLBufferedDataFile::IsOpen(){    return (m_pFile ? TRUE : FALSE);}/* Seek moves the current file position to the offset from the * fromWhere specifier returns current position of file or -1 on * error. */STDMETHODIMPBufferedDataFile::Seek(ULONG32 offset, UINT16 fromWhere){    if (m_pFile)    {	m_ulLastError = HXR_OK;       	if (fseek(m_pFile, offset, fromWhere) < 0)	{	    m_ulLastError = errno;	    return HXR_INVALID_FILE;	}	return HXR_OK;    }    return HXR_INVALID_FILE;}/* Tell returns the current file position in the file */STDMETHODIMP_(ULONG32)BufferedDataFile::Tell(){    INT32 offset = -1;    m_ulLastError = (UINT32)HXR_FAIL;    if (m_pFile)    {	// so we do this instead....	if ((offset = ftell(m_pFile)) != -1)	{	    m_ulLastError = HXR_OK;       	}    }    return (ULONG32) offset;}/* Read reads up to count bytes of data into buf. * returns the number of bytes read, EOF, or -1 if the read failed  */STDMETHODIMP_(ULONG32)BufferedDataFile::Read(REF(IHXBuffer*) pOutBuf, ULONG32 count){    int ncnt = 0;           // number of bytes read    IHXBuffer* pBuf = NULL;    if (m_pFile)    {	if (pOutBuf)	{	    pBuf = pOutBuf;	}	else	{	    m_ulLastError = (UINT32)HXR_OUTOFMEMORY;	    pBuf = new CHXBuffer();	}	if (pBuf)	{	    pBuf->AddRef();	    m_ulLastError = pBuf->SetSize(count);	}		if (m_ulLastError == HXR_OK)	{	    Tell();	}	if (m_ulLastError == HXR_OK)	{	    if ((ncnt = fread((void *)pBuf->GetBuffer(), sizeof(char), 			      count, m_pFile)) < (int)count)	    {		m_ulLastError = ferror(m_pFile) ? HXR_FAIL : HXR_OK;	    }	    if (ncnt < (int)count)	    {		pBuf->SetSize(ncnt);	    }	    if (pBuf != pOutBuf)	    {		pOutBuf = pBuf;		pBuf->AddRef();	    }	}	if (pBuf)	{	    pBuf->Release();	}    }    return (ULONG32)ncnt;}/* Write writes up to count bytes of data from buf. * returns the number of bytes written, or -1 if the write failed  */STDMETHODIMP_(ULONG32)BufferedDataFile::Write(REF(IHXBuffer *) pBuf){    int ncnt = -1;           // number of bytes written    if (m_pFile)    {	m_ulLastError = HXR_OK;	if ((ncnt = fwrite(pBuf->GetBuffer(), sizeof(char), 	    pBuf->GetSize(), m_pFile)) < (int)(pBuf->GetSize()))	{	    m_ulLastError = (UINT32)HXR_FAIL;	}    }    return (ULONG32)ncnt;}/* Flush out the data in case of Buffered I/O */STDMETHODIMPBufferedDataFile::Flush(){    if (m_pFile)    {	m_ulLastError = HXR_OK;       	if (fflush(m_pFile) == 0)	{	    return HXR_OK;	}	m_ulLastError = (UINT32)HXR_FAIL;	return HXR_FAIL;	    }    return HXR_INVALID_FILE;}/* * Return info about the data file such as permissions, time of creation * size in bytes, etc. */STDMETHODIMPBufferedDataFile::Stat(struct stat* statbuf){#ifndef WIN32_PLATFORM_PSPC    if (m_pFile)    {	if (!fstat(fileno(m_pFile), statbuf))	    return HXR_OK;    } else#endif    if (m_pFilename->GetSize())    {	if (!stat((const char *)m_pFilename->GetBuffer(), statbuf))	    return HXR_OK;    }    return HXR_FAIL;}/* Return the file descriptor */inline INT16BufferedDataFile::GetFd(){    return m_pFile ? (INT16) fileno(m_pFile) : -1;}/* GetLastError returns the platform specific file error */STDMETHODIMPBufferedDataFile::GetLastError(){    return m_ulLastError;}/* GetLastError returns the platform specific file error in * string form. */STDMETHODIMP_(void)BufferedDataFile::GetLastError(REF(IHXBuffer*) err){}STDMETHODIMPBufferedDataFile::Delete(){    Close();    if ((!m_pFilename) || (m_pFilename->GetSize() == 0))    {	return HXR_UNEXPECTED;    }#if defined(_WINDOWS)    if (DeleteFile(OS_STRING(m_pFilename->GetBuffer())))    {	return HXR_OK;    }#elif defined(_UNIX)    if (unlink(OS_STRING(m_pFilename->GetBuffer())) == 0)    {	return HXR_OK;    }#endif	// _UNIX    return HXR_FAIL;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -