⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 h263dec.cpp

📁 linux下的一款播放器
💻 CPP
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: h263dec.cpp,v 1.10.4.1 2004/07/09 01:56:54 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#include "hxtypes.h"#include "hxresult.h"#include "hxassert.h"#include "hxwintyp.h"#include "hxcom.h"#include "hxcomm.h"#include "ihxpckts.h"#include "hxplugn.h"#include "hxengin.h"#include "hxerror.h"#include "hxformt.h"#include "hxslist.h"#include "dllaccesbridge.h"#include "dllpath.h"#include "hxvh263.h"#include "h263vdec.h"#include "h263dec.h"#include "h263vidfmt.h"#include "hxstrutl.h"#include "hxheap.h"#ifdef _DEBUG#undef HX_THIS_FILE		static const char HX_THIS_FILE[] = __FILE__;#endif/**************************************************************************** *  Method: *    CH263Decoder::CH263Decoder * */CH263Decoder::CH263Decoder(IUnknown* pContext)    : m_pCodecAccess(NULL)    , m_fpH263Init(0)    , m_fpH263Free(0)    , m_fpH263Transform(0)    , m_pContext(pContext)    , m_pDecoderState(NULL)    , m_ulPreviousFrameType(0)    , m_bMoreFrames(FALSE){    HX_ADDREF(m_pContext);}/**************************************************************************** *  Method: *    CH263Decoder::~CH263Decoder * */CH263Decoder::~CH263Decoder(){    CloseDecoder();    HX_RELEASE(m_pContext);}HX_RESULT CH263Decoder::CloseDecoder(){    if (m_pDecoderState)    {	m_fpH263Free(m_pDecoderState);	m_pDecoderState = NULL;    }    m_fpH263Init = NULL;    m_fpH263Free = NULL;    m_fpH263Transform = NULL;    HX_DELETE(m_pCodecAccess);    return HXR_OK;}/**************************************************************************** *  Method: *    CH263Decoder::CH263Decoder * */HX_RESULTCH263Decoder::InitDecoder(HXxSize* pSize){    // Build the module name if none is supplied    char pLibName[16]; /* Flawfinder: ignore */	// Try to load a codec until OS_BuildLibName does not find one    for (INT32 i=0;; i++)    {        if (!m_pCodecAccess)        {            if (OS_BuildLibName(pLibName, 16, i) == FALSE)            {                return HXR_FAIL;            }            // DLLAccess should be used to provide cross-platform support            m_pCodecAccess = new DLLAccessBridge(pLibName, DLLTYPE_CODEC, m_pContext);        }        if (LoadCodecFunctions())        {            // We found a codec and could get its symbols            break;        }                // We could not get the codec's symbols so look for another one        HX_DELETE(m_pCodecAccess);    }    if (m_pDecoderState)    {	m_fpH263Free(m_pDecoderState);    }    m_InitParams.outtype    = T_YUV420_NOCOPY;    m_InitParams.pels	    = (UINT16)pSize->cx;    m_InitParams.lines	    = (UINT16)pSize->cy;    m_InitParams.nPadWidth    = 0;	/* number of columns of padding on right to get 16 x 16 block*/    m_InitParams.nPadHeight   = 0;/* number of rows of padding on bottom to get 16 x 16 block*/    m_InitParams.ulInvariants = 0;	// ulInvariants specifies the invariant picture header bits    m_InitParams.packetization = TRUE;    m_InitParams.ulStreamVersion = HX_ENCODE_PROD_VERSION(4,4,0,0);    return m_fpH263Init(&m_InitParams, &m_pDecoderState);}/**************************************************************************** *  Method: *    CH263Decoder::DecodeFrame() */HX_RESULTCH263Decoder::DecodeFrame(CMediaPacket* pFrameToDecode, 			  UINT8* pDecodedBuf,			  HXxSize* pFrameDims) {    HX_RESULT ret = HXR_OK;    if (m_fpH263Transform != NULL)    {	H263DecoderOutParams OutputParams;	H263DecoderInParams InputParams;		InputParams.dataLength = pFrameToDecode->m_ulDataSize;	InputParams.bInterpolateImage = FALSE;	InputParams.numDataSegments = 0;	InputParams.pDataSegments = 0;	InputParams.timestamp = pFrameToDecode->m_ulTime;	InputParams.flags = 0;	if (m_bMoreFrames)	{	    m_bMoreFrames = FALSE;	    InputParams.flags |= RV_DECODE_MORE_FRAMES;	}			if (pDecodedBuf != NULL)	{	    ret = VerifyInput(pFrameToDecode, &InputParams);                if (FAILED(ret))        {            return ret;        }        ret = m_fpH263Transform(pFrameToDecode->m_pData, 		pDecodedBuf, &InputParams, 		&OutputParams, m_pDecoderState);#ifdef XXX_JHUG_DEBUG	    FILE* f = fopen("C:\\TEMP\\decodeLog.txt", "a+");	    fprintf(f, "Transform pBuffer, length=%i %s\n", pBuffer->GetSize(), SUCCEEDED(ret) ? "SUCCEEDED":"FAILED");	    fclose(f);#endif // XXX_JHUG_DEBUG	    	    if (OutputParams.notes & RV_DECODE_KEY_FRAME)	    {		m_ulPreviousFrameType = FRAME_TYPE_I;	    }	    else	    {		if (OutputParams.notes & RV_DECODE_B_FRAME)		{		    m_ulPreviousFrameType = FRAME_TYPE_B;		}		else		{		    m_ulPreviousFrameType = FRAME_TYPE_P;		}	    }	    if (pFrameDims)	    {		pFrameDims->cx = OutputParams.width;		pFrameDims->cy = OutputParams.height;	    }	}	else 	{	    m_ulPreviousFrameType = FRAME_TYPE_I;	}	if (OutputParams.notes & RV_DECODE_MORE_FRAMES)	{	    m_bMoreFrames = TRUE;	}	else	{	    m_bMoreFrames = FALSE;	}    }    else    {	ret = HXR_FAIL;    }	    return ret;}/**************************************************************************** *  Method: *    CH263Decoder::OS_BuildLibName */BOOL CH263Decoder::OS_BuildLibName(char *pLibName,                                   UINT32 ulLibNameBufLen,                                   INT32 nIndex){    BOOL rtn = TRUE;    if (pLibName == NULL)        return FALSE;    // Priority scheme for loading h263 backend    switch (nIndex)    {        // mpeg4/h263/rv7 combo decoder        case 0:            SafeStrCpy(pLibName, "dmp4", ulLibNameBufLen);            break;                // g2 decoder        case 1:        case 2:            SafeStrCpy(pLibName, "drv2", ulLibNameBufLen);            break;                // h263 backend        case 3:            SafeStrCpy(pLibName, "d263", ulLibNameBufLen);            break;        default:            return FALSE;    }#if defined(WIN32) || defined(_WIN32)    if (2 == nIndex)    {        SafeStrCat(pLibName, "3260", ulLibNameBufLen);    }    SafeStrCat(pLibName, ".DLL", ulLibNameBufLen);#elif defined (_MAC_UNIX)    SafeStrCpy(pLibName, ".bundle", ulLibNameBufLen);#elif _MACINTOSH #if defined(_CARBON)#ifdef _MAC_MACHO    SafeStrCpy(pLibName, ".bundle", ulLibNameBufLen);#else	// _MAC_MACHO    SafeStrCat(pLibName, ".shlb", ulLibNameBufLen);#endif	// _MAC_MACHO#else	// _CARBON        SafeStrCat(pLibName, ".DLL", ulLibNameBufLen);#endif	// _CARBON#elif defined (_UNIX)    //    // codecs are named like this :XXXX.so" where XXXX is the    // codec id string    //    SafeStrCat(pLibName, ".so", ulLibNameBufLen);#endif    return rtn;}BOOL CH263Decoder::LoadCodecFunctions(){    BOOL bReturn = m_pCodecAccess->isOpen();    if (bReturn)    {        // we got a module so get the symbols we need	if (!m_fpH263Init)        {            m_fpH263Init = (FPTRANSFORMINIT) m_pCodecAccess->getSymbol("RV20toYUV420Init");        }        if (!m_fpH263Init)        {            m_fpH263Init = (FPTRANSFORMINIT) m_pCodecAccess->getSymbol("HXVtoYUV420Init");        }	if (!m_fpH263Free)        {            m_fpH263Free = (FPTRANSFORMFREE) m_pCodecAccess->getSymbol("RV20toYUV420Free");        }        if (!m_fpH263Free)        {            m_fpH263Free = (FPTRANSFORMFREE) m_pCodecAccess->getSymbol("HXVtoYUV420Free");        }	if (!m_fpH263Transform)        {            m_fpH263Transform = (FPTRANSFORMHXV10TOYUV) m_pCodecAccess->getSymbol("RV20toYUV420Transform");        }        if (!m_fpH263Transform)        {            m_fpH263Transform = (FPTRANSFORMHXV10TOYUV) m_pCodecAccess->getSymbol("HXVtoYUV420Transform");        }	        if (m_fpH263Init == NULL ||            m_fpH263Free == NULL ||            m_fpH263Transform == NULL)        {            bReturn = FALSE;        }    }    return bReturn;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -