escsmil.cpp

来自「linux下的一款播放器」· C++ 代码 · 共 346 行

CPP
346
字号
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: escsmil.cpp,v 1.2.18.1 2004/07/09 01:57:20 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#include "hxcom.h"     /* IUnknown */#include "hxtypes.h" #include "hxbuffer.h"#include "hxiids.h"#include "hxstrutl.h"#include "hxstring.h"#include "growingq.h"#include "xmlesc.h"#include "escsmil.h"#include "vsrcinfo.h"/*___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Static variable declarations *___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/const char* const CEscapeSMIL::m_pHotSMILTags[] = {       "ref"    , "animation"    , "audio"    , "img"    , "video"    , "text"    , "textstream"    , "meta"    , 0};/*___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *  CEscapeXMLtoHTML::PushHeader(queue) * *  PARAMETERS: *	queue	The queue to push the output to. * *  DESCRIPTION: *	This function pushes the header information for the smil file. * *  RETURNS *	void *___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/voidCEscapeSMIL::PushHeader(CBigByteGrowingQueue* queue){    queue->EnQueue(z_pOpen);        char buf[sizeof(z_pImage_ss) + sizeof(z_pSMILImageLoc) /* Flawfinder: ignore */    		+ sizeof(z_pSMILAltText)];    //sprintf(buf, z_pImage_ss, z_pSMILImageLoc, z_pSMILAltText);    queue->EnQueue(z_pSMILHeader);        //queue->EnQueue(z_pSMILHREF);    //queue->EnQueue(buf);    //queue->EnQueue("</a>");    queue->EnQueue(z_pStream);    queue->EnQueue(z_pSMILName);    queue->EnQueue(z_pEndLine);        PushCommonHeader(queue);    sprintf(buf, z_pXMLSource_s, z_pSMILName); /* Flawfinder: ignore */    queue->EnQueue(buf);    queue->EnQueue(z_pClose);        queue->EnQueue(z_pSMILTrailer);}/*___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *  CEscapeXMLtoHTML::OnTag(cp, pObj, queue) * *  PARAMETERS: * *	cp	It points to the first whitespace after a tag name we are *		looking for *	ulLen	Length to end of cp so we don't overrun the buffer *	pObj	The current state of the Parse Function, this can be used *		to continue parsing.  its tag member contains the name *		of the tag *	queue	The queue to push the output to. * *  DESCRIPTION: *	This function is used to wrap any key attributes in the any tags in *	m_pHotRTTags. It calls CEscapeXMLtoHTML to do most the work * *  RETURNS *	UINT32 *	    number of characters used off cp *___________________________________________________________________________ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/UINT32CEscapeSMIL::OnTag(const UCHAR* cp, UINT32 ulLen, DataObject* pObj,		   CBigByteGrowingQueue* pQueue){    if ( strcasecmp(pObj->tag, "meta") == 0 )    {	// special case - we need to find the base -	const UCHAR* pBeginName = NULL;	const UCHAR* pBeginContent = NULL;	const UCHAR* pEndTag = NULL;	const char* walker = (const char*)cp;	BOOL bInComment = FALSE;	UINT32 ulEscLen = 0;	while ( (!pEndTag) && ulEscLen < ulLen)	{	    if ( !bInComment )	    {		if ( *walker == '>')		{		    pEndTag = (const UCHAR*)walker;		    ++pEndTag;		}		else if ( ulEscLen + 6 < ulLen && 		    isspace(*(walker-1)) && 		    !strncmp(walker, "name", 4) &&		    (*(walker+4) == '=' || isspace(*(walker+4))) )		{		    walker += 4;		    ulEscLen += 4;		    while ( isspace(*walker) && ulEscLen < ulLen )		    {			++walker;			++ulEscLen;		    }		    HX_ASSERT(*walker == '=');		    if ( *walker == '=' )		    {			++walker;			++ulEscLen;			while ( isspace(*walker) && ulEscLen < ulLen )			{			    ++walker;			    ++ulEscLen;			}			HX_ASSERT(*walker == '\"' || *walker == '\'');			if ( *walker == '\"' || *walker == '\'' )			{			    ++walker;			    ++ulEscLen;			    pBeginName = (const UCHAR*)walker;			}		    }		}		else if ( ulEscLen + 7 < ulLen &&  		    isspace(*(walker-1)) && 		    !strncmp(walker, "content", 7) &&		    (*(walker+7) == '='|| isspace(*(walker+7))) )		{		    walker += 7;		    ulEscLen += 7;		    while ( isspace(*walker) && ulEscLen < ulLen )		    {			++walker;			++ulEscLen;		    }		    HX_ASSERT(*walker == '=');		    if ( *walker == '=' )		    {			++walker;			++ulEscLen;			while ( isspace(*walker) && ulEscLen < ulLen )			{			    ++walker;			    ++ulEscLen;			}			HX_ASSERT(*walker == '\"' || *walker == '\'');			if ( *walker == '\"' || *walker == '\'' )			{			    ++walker;			    ++ulEscLen;			    pBeginContent = (const UCHAR*)walker;			}		    }		}		else if ( ulEscLen + 4 < ulLen && 		    !strncmp(walker, "<!--", 4) )		{		    bInComment = TRUE;		    walker += 3;		    ulEscLen += 3;		}	    }	    else	    {		if ( ulEscLen + 3 < ulLen && !strncmp(walker, "-->", 3) )		{		    bInComment = FALSE;		    walker += 2;		    ulEscLen += 2;		}	    }	    ++walker;	    ++ulEscLen;	}	if ( pEndTag == NULL || pBeginName == NULL || pBeginContent == NULL )	{	    return 0;	}	else if ( strncmp((const char*)pBeginName, "base", 4) == 0 )	{	    char* pOldPath = m_pOurPath;	    char* pEndContent = (char*)strchr((const char*)pBeginContent, '\"');	    if ( pEndContent == NULL )	    {		pEndContent = (char*)strchr((const char*)pBeginContent, '\'');	    }	    HX_ASSERT(pEndContent);	    UINT32 ulConLen = 0;	    if ( pEndContent )	    {		ulConLen = (const UCHAR*)pEndContent - pBeginContent;	    }	    m_pOurPath = new char[strlen(pOldPath) + ulConLen + 2];	    strcpy(m_pOurPath, pOldPath);	    HX_VECTOR_DELETE(pOldPath);	    if ( *pBeginContent == '/' )	    {		strncpy(m_pOurPath, (const char*)pBeginContent, ulConLen);		m_pOurPath[ulConLen] = '\0';	    }	    // if it is alpha it is a relative directory name	    else if ( isalnum(*pBeginContent) )	    {		// 1 for "/"		UINT32 len = strlen(m_pOurPath) + ulConLen + 1;		strcat(m_pOurPath, "/");		strncat(m_pOurPath, (const char*)pBeginContent, ulConLen);		m_pOurPath[len] = '\0';	    }	    else if ( !strncmp((const char*)pBeginContent, "./", 2) )	    {		// -1 for .		UINT32 len = strlen(m_pOurPath) + ulConLen - 1;		strncat(m_pOurPath, (const char*)pBeginContent + 1, ulConLen - 1);		m_pOurPath[len] = '\0';	    }	    else if ( !strncmp((const char*)pBeginContent, "../", 3 ) )	    {		int count = 0;		const char* pRelativePath = (const char*)pBeginContent;		char* pCurrentEndOfPath = m_pOurPath;		pCurrentEndOfPath += strlen(m_pOurPath);		// back up a directory off of the file path for		// every ../ we find		while (!strncmp((const char*)pRelativePath, "../", 3 ))		{		    // we found a ../ so back up a directory on the path,		    // walk backwards to the previous / and set it to null		    while (*pCurrentEndOfPath != '/' && 			pCurrentEndOfPath >= m_pOurPath)		    {			pCurrentEndOfPath--;		    }		    // watch to make sure we don't have more ../ than directories		    if ( pCurrentEndOfPath < m_pOurPath )		    {			++pCurrentEndOfPath;		    }		    *pCurrentEndOfPath = '\0';		    pRelativePath +=3;		}		UINT32 len = (pCurrentEndOfPath - m_pOurPath) + 		    ulConLen - (pRelativePath - (const char*)pBeginContent) + 1;				// back 1 off of pRelativePath so we get the / that's there.		strncat(m_pOurPath, (const char*)pRelativePath - 1,		    ulConLen - (pRelativePath - (const char*)pBeginContent) + 1);		m_pOurPath[len] = '\0';	    }	    else	    {		HX_ASSERT(FALSE);		return 0;	    }	    // get rid of the trailing '/' if there is one.	    ulConLen = strlen(m_pOurPath);	    if ( m_pOurPath[ulConLen-1] == '/' )	    {		m_pOurPath[ulConLen-1] = '\0';	    }	}	return 0;    }    else    {	// src=" attribute is the only one we are looking for.	return WrapAttributeWithHREF(cp, ulLen, pObj, pQueue, "src");    }}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?