📄 smlprstime.h
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: smlprstime.h,v 1.1.22.1 2004/07/09 01:57:56 hubbe Exp $ * * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. * * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks. You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL. Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. * * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. * * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. * * Technology Compatibility Kit Test Suite(s) Location: * http://www.helixcommunity.org/content/tck * * Contributor(s): * * ***** END LICENSE BLOCK ***** */#ifndef SMLPRSTI_H#define SMLPRSTI_Henum SmilTimeType{ SmilTimeNone, SmilTimeOffset, SmilTimeClockValue, SmilTimeSyncBase,#if defined(ENABLE_SYNC_TO_PREV) SmilTimeSyncToPrev,#endif SmilTimeEvent, SmilTimeMediaMarker, SmilTimeWallclock};// Forward declarationsclass CSmilElement;class CHXString;class SmilTimeValue{public: SmilTimeValue(IUnknown* pContext, UINT32 ulStartLine, CSmilElement* pElement); virtual ~SmilTimeValue(); HX_RESULT parseValue(const char* pPos, SMILSyncAttributeTag nTag, const char* pThisElementID); INT32 setTimeOffset(time_t refTime); INT32 getTimeOffset() { return m_lOffset;} SmilTimeType getTimeType() { return m_type; } const char* getEventName() { return (const char*) m_pEventName; } void handleAsEvent(const char* pstr) { if (pstr) m_pEventName = (char*)pstr; m_bTreatSyncArcAsEvent = TRUE; } const char* getIdRef() { return (const char*) m_idRef; } BOOL isTimeResolved() { return m_bTimeIsResolved; } void setIsTimeResolved(BOOL bIsResolved); HX_RESULT getEffectiveResolvedTime(REF(INT32) lEffectiveResolvedTime); // /This sets the "base" time it resolved to, i.e., without the offset: void setResolvedToTime(INT32 lWhen) { m_lResolvedToTime = lWhen; } INT32 getResolvedToTimeWithoutOffset() { return m_lResolvedToTime; } // /XXXEH- not sure yet whether we need these 2 functions: INT32 getWhenTimeWasResolved() { return m_lWhenTimeWasResolved; } void setWhenTimeWasResolved(INT32 lWhen) { m_lWhenTimeWasResolved = lWhen; }#if defined(ENABLE_SYNC_TO_PREV) BOOL isSyncBaseTimeVal() { return (SmilTimeSyncBase == m_type || SmilTimeSyncToPrev == m_type); }#else BOOL isSyncBaseTimeVal() { return (SmilTimeSyncBase == m_type); }#endif BOOL isResumeEvent() { return (m_type == SmilTimeEvent && m_pEventName && 0==strcmp(m_pEventName, "resumeEvent")); } BOOL isUndeferEvent() { return (m_type == SmilTimeEvent && m_pEventName && 0==strcmp(m_pEventName, "undeferEvent")); } HX_RESULT setPauseTime(LONG32 lTimeOfPause); ULONG32 getPauseTime() { return m_lTimeOfPause;} BOOL isSameTimeValue(SmilTimeValue* pOtherTimeVal); BOOL deferUntil(LONG32 lNewStartTime); // Media-marker-related const char* getFullMarkerName() const { return m_pszMarkerName; } BOOL isExternalMarker() const { return m_bIsExternalMarker; } const char* getExternalMarkerFileName() const { return m_pszExternalMarkerFileName; } const char* getExternalMarkerName() const { return m_pszExternalMarkerName; } const char* getMarkerName() const { return (m_bIsExternalMarker ? m_pszExternalMarkerName : m_pszMarkerName); } void setMarkerTime(UINT32 ulTime); // /Point back at "owner" of this: CSmilElement* m_pElement; // /This is "foo" in the following example: "foo.beginEvent+5s" CHXString m_idRef; // /This is id of element that deferred us: CHXString m_awaitingThisOnesEndForUndefer; SMILEventSourceTag m_position; // /This is the '5' in: begin="foo.repeat(5)": UINT16 m_uRepeatIteration; SmilTimeType m_type; // ONLY HX_BITFIELD MEMBERS SHOULD GO BELOW THIS LINE! // ALL OTHER MEMBER TYPES SHOULD GO ABOVE THIS LINE! HX_BITFIELD m_bTreatSyncArcAsEvent : 1;private: HX_RESULT parseOffset(const char* pCh); HX_RESULT parseClockValue(const char* pValue, UINT32& ulTimeValue);#if defined(ENABLE_SYNC_TO_PREV) HX_RESULT parseSyncToPrev(REF(const char*) pPos);#endif HX_RESULT parseWallClockValue(REF(const char*) pCh); HX_RESULT parseEvent(const char* pBase, const char* pEvent, const char* pOffset); HX_RESULT parseSyncBase(const char* pBase, const char* pEvent, const char* pOffset); HX_RESULT parseMarker(const char* pBase, const char* pEvent, const char* pOffset); IUnknown* m_pContext; UINT32 m_ulStartLine; // /This is the time offset from a sync-arc or event-arc, e.g., // this is 5000 (milliseconds) in the following example: // "foo.beginEvent+5s": INT32 m_lOffset; // /Deferring and other things can change m_lOffset; this keeps track of // what it was set to originally in case we restart: INT32 m_lOriginalOffset; // the date defaults to -1/-1/-1 :==> today... INT16 m_year; INT8 m_month; INT8 m_day; // the time defaults to 00:00:00.0 UINT8 m_hour; UINT8 m_min; UINT8 m_sec; UINT16 m_ms; // defaults to 0: local time INT16 m_UTCOffsetMin; // media-marker-related char* m_pszMarkerName; // in begin="foo.marker()", this is what's inside the () char* m_pszExternalMarkerFileName; // in begin="foo.marker(foo.mmr#A)", this is "foo.mmr" char* m_pszExternalMarkerName; // in begin="foo.marker(foo.mmr#A)", this is "A" UINT32 m_ulMarkerTime; // /This is "beginEvent" in the following example: "foo.beginEvent+5s" char* m_pEventName; // /This is the time that a non-clock/offset time resolved to; it differs // from m_lWhenTimeWasResolved in cases like pure sync-arc timing where // the resolved-to time is calculatable well in advance of the time it // was resolved: INT32 m_lResolvedToTime; // /This is the time passed in to CSmilParser::tryToResolveBeginEndEvents // which gets called whenever an event occurs. We need this because // this tells us *when* we resolved and we want to keep this separate // from the m_lOffset in case it is negative, in which case our offset // is really m_lWhenTimeResolved with a clip-begin of m_lOffset: // /XXXEH- TODO: make sure final SMIL Boston spec agrees with above and // also, make sure that sync-arc and other time values that resolve after // the start of the presentation also get this set: INT32 m_lWhenTimeWasResolved; // /For resume event times, this keeps track of when *this was created so // we can recalculate the element's end time when a resume is needed: INT32 m_lTimeOfPause; // ONLY HX_BITFIELD MEMBERS SHOULD GO BELOW THIS LINE! // ALL OTHER MEMBER TYPES SHOULD GO ABOVE THIS LINE! HX_BITFIELD m_bRelativeToUTC : 1; // defaults to FALSE, relative to local time HX_BITFIELD m_bIsExternalMarker : 1; HX_BITFIELD m_bUsedToBeMediaMarker : 1; // /XXEH- TODO: make sure to reset this to FALSE whenever a repeat (or // seek?) happens: // /This says whether or not this's time is resolved to a clock val; HX_BITFIELD m_bTimeIsResolved : 1;};#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -