📄 smlelem.h
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: smlelem.h,v 1.4.16.1 2004/07/09 01:57:56 hubbe Exp $ * * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. * * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks. You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL. Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. * * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. * * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. * * Technology Compatibility Kit Test Suite(s) Location: * http://www.helixcommunity.org/content/tck * * Contributor(s): * * ***** END LICENSE BLOCK ***** */#ifndef _SMLELEM_H_#define _SMLELEM_H_#define WAY_IN_THE_FUTURE 1981342000 /*1981342000 is 22d+22h+22m+22s */#if !defined(MAX_LONG32)#define MAX_LONG32 0x7FFFFFFF#endif// /This is used for passing invalid coord value for firing a link when an// accesskey event occurs (and no mouse coords are involved): #define ANCHOR_POS_DONTCARE ((UINT16)-1)// /This is used to simplify event processing since accesskey events have no// element that raises them, they have no element ID. The following is used// for all accesskey events that have no ID, and it starts with a number to// make sure it's an illegal XML id and thus won't be used in a SMIL file:#define ACCESSKEY_EVENT_FAKE_ID_STRING "21yrsOld__accesskey_fake_id"// Forward declarationstypedef _INTERFACE IHXValues IHXValues;typedef _INTERFACE IHXBuffer IHXBuffer;class CSmilElement;class CSmilAddGroup;class CSmilRootLayout;class CSmilRegion;class CSmilRegPoint;#if defined(HELIX_FEATURE_SMIL2_MULTIWINDOWLAYOUT)class CSmilViewport;#endif /* #if defined(HELIX_FEATURE_SMIL2_MULTIWINDOWLAYOUT) */class CSmilSource;class CSmilMeta;class CSmilMetadata;class CSmilEndLayout;class CSmilRendererPreFetch;class CSmilSourceUpdate;#if defined(HELIX_FEATURE_SMIL2_TRANSITIONS)class CSmilTransition;#endif /* #if defined(HELIX_FEATURE_SMIL2_TRANSITIONS) */class CSmilAnimateElement;class CSmilCustomTest;class SMILNode;class CSmilParser;class SmilTimeValue;class CHXString;class CSmilTimelineElement;class CHXSimpleList;class CAttr;class CHXStack;class CSmilElement;class CSmilElementHandler{public: virtual HX_RESULT handleAddGroup(CSmilAddGroup* pAddGroup) = 0; virtual HX_RESULT handleRootLayout(CSmilRootLayout* pRootLayout) = 0; virtual HX_RESULT handleRegion(CSmilRegion* pRegion) = 0; virtual HX_RESULT handleRegPoint(CSmilRegPoint* pRegPoint) = 0;#if defined(HELIX_FEATURE_SMIL2_MULTIWINDOWLAYOUT) virtual HX_RESULT handleViewport(CSmilViewport* pView) = 0;#endif /* #if defined(HELIX_FEATURE_SMIL2_MULTIWINDOWLAYOUT) */ virtual HX_RESULT handleSource(CSmilSource* pSource) = 0; virtual HX_RESULT handleMeta(CSmilMeta* pMeta) = 0; virtual HX_RESULT handleMetadata(CSmilMetadata* pMetadata) = 0; virtual HX_RESULT handleEndLayout(CSmilEndLayout* pEndLayout) = 0; virtual HX_RESULT handleRendererPreFetch(CSmilRendererPreFetch* pRend) = 0; virtual HX_RESULT handleSourceUpdate(CSmilSourceUpdate* pUpdate) = 0;#if defined(HELIX_FEATURE_SMIL2_TRANSITIONS) virtual HX_RESULT handleTransition(CSmilTransition* pTrans) = 0;#endif /* #if defined(HELIX_FEATURE_SMIL2_TRANSITIONS) */ virtual HX_RESULT handleTrackRemoval(const char* pID, INT32 nGroup) = 0; virtual HX_RESULT handleTrackPausing(SMILNode* pNode, LONG32 lTimeOfPause, SMILPriorityClassPauseDisplay pauseDisplay, const char* pIdOfPauser) = 0; virtual HX_RESULT handleTrackResuming(const char* pID, INT32 nGroup) = 0;#if defined(HELIX_FEATURE_SMIL2_ANIMATION) virtual HX_RESULT handleAnimate(CSmilAnimateElement* pAnimate) = 0;#endif /* #if defined(HELIX_FEATURE_SMIL2_ANIMATION) */ virtual HX_RESULT handleRemoveTimeUpdate(CSmilElement* pElement, UINT32 ulRemoveTime) = 0; virtual HX_RESULT handleExternalMediaMarkerFile(CSmilElement* pElement, const char* pszID, const char* pszExternalFileName, const char* pszRelativeSource) = 0; virtual HX_RESULT resolveGroupDurToOuterTimeContainerDur(UINT32 ulGroupIndex, UINT32 ulGroupTimeContainerDuration) = 0; virtual HX_RESULT GetCurGroupDuration(REF(UINT32) ulCurGrpDur) = 0;};class CSmilElement{public: CSmilElement(SMILNode* pNode); virtual ~CSmilElement(); virtual void addDuration(UINT32 ulDuration); virtual void addElement(CSmilElement* pElement, UINT32& ulStartTime, UINT32& ulDuration); virtual HX_RESULT handleElement() { return HXR_OK; } virtual HX_RESULT setBeginTime(CSmilParser* pParser); virtual HX_RESULT setEndTime(CSmilParser* pParser); virtual void prepForRestart(BOOL bParentIsRestarting, LONG32 lWhen); virtual void prepForPauseInExcl(LONG32 lCurTime); virtual void prepForResumeInExcl(); virtual void prepForStopInExcl(LONG32 lCurTime); virtual void prepForDeferralInExcl(UINT32 lCurTime); virtual BOOL isPausedInExcl() { return m_bIsPausedInExcl; } virtual BOOL isDeferredInExcl() { return m_bIsDeferredInExcl; } virtual BOOL isStoppedInExcl() { return m_bIsStoppedInExcl; } virtual HX_RESULT getBeginTimeValue(REF(SmilTimeValue*) pValue); virtual HX_RESULT getEndTimeValue(REF(SmilTimeValue*) pValue); // /These were added in order to easily calculate when an already- // inserted-into-the-timeline element *actually* begins and ends so // that doing such things as freezing and holding can be done: virtual HX_RESULT getCurrentScheduledStartTime( REF(ULONG32) ulActualStartTime); virtual HX_RESULT getCurrentScheduledStopTime( REF(ULONG32) ulActualStopTime); // /Note: pValue, as well as the two lists, is|are filled with either // begin or end time|times, depending on the listType value: virtual HX_RESULT getNextResolvedTimeValue(REF(SmilTimeValue*) pValue, INT32 lCurTimeInGroupTime, INT32 lCurTimeInSyncBaseTime, SmilTimingListType listType, CHXSimpleList* pListOfAllResolvedTimes); virtual HX_RESULT resolveEventTimeValues(INT32 lCurTime, const char* pEventName, const char* pEventElementId, SmilTimingListType listType, REF(BOOL) bATimeWasResolved); virtual HX_RESULT resolveSyncArcTimeValues(INT32 lResolvedToTime, const char* pSyncBaseElementId, SmilTimingListType listType, REF(BOOL) bATimeWasResolved, BOOL bMoveNewlyResolvedsToPendingTimesList, CSmilParser* pParser); virtual HX_RESULT getParentRestartDefault(); virtual void updateRemoveTime(UINT32 ulRemoveTime); virtual void handleXMMF(const char* pszID, const char* pszXMMFile, const char* pszSrc); virtual BOOL hasEventBasedBeginTime(); virtual BOOL hasEventBasedEndTime(); virtual CSmilElement* getSyncAncestorElement(); // /Use of the new method fixes PR 79699 and PR 8XXYZ (PR 63622 part 3, // revisited) by making sure that the duration passed to // resetTimelineElementDuration() is in local time coords, not syncbase // time coord (i.e., m_ulDuration may or may not include the delay beyond // the syncbase. This method returns the duration from the element's // begin to its end, w/o any delay: ULONG32 getPureDuration(); // /This method goes through the m_pEndTimeList to see if there's an // event-arc end time or other unresolved end time; this is important // for use in the algorithm for determining whether or not something // should restart (see SMIL 2.0 Spec Timing Module's getNextInterval() // pseudocode): BOOL hasUnresolvedEndTime(); // /This method helps fix PR 50660 (par version) and PR 62408: to make // sure restarted track doesn't get treated as a repeat track in // handleSource(), it calls this and uses the return val to decide; the // m_bIsRestarting is reset to FALSE in case this element does have // a repeat so the repeats will also restart: BOOL IsRestartingAndNotRepeating() { BOOL bIs=m_bIsRestarting; m_bIsRestarting=FALSE; return bIs;} HX_RESULT GetElementProperties(REF(IHXValues*) pProperties); void checkElementFillBehavior(); // /NOTE: all values below are for the currently-active (or, if this // element is not active on the timeline currently, the next-to-be // active) "interval" (see SMIL 2.0 Timing module for details on // how a "current interval" is defined and computed). Multiple begin // and end times are stored in the m_pBeginTimeList and m_pEndTimeList, // respectively. When a new one from that list becomes the active one, // the following vars may change (which happens *during* playback): SMILNode* m_pNode; UINT32 m_ulClipBegin; // start of clip UINT32 m_ulAuthoredClipBegin; // explicitly-authored clipBegin value UINT32 m_ulClipEnd; // clip end time INT32 m_lBeginOffset; // clip delay ULONG32 m_ulBeginOffsetFromSyncBase; UINT32 m_ulDelay; // presentation delay // /NOTE: this may include delay beyond syncbase. getPureDuration() // returns the duration from the element's begin to its end, w/o delay: UINT32 m_ulDuration; // clip duration UINT32 m_ulOriginalDuration; // value dur attribute if dur is specified. UINT32 m_ulDurationInAddTrack; UINT32 m_ulMaxDuration; UINT32 m_ulMaxActiveDur; // as set by the "min" attribute. deflt=indef UINT32 m_ulMinActiveDur; // as set by the "min" attribute. default=0. UINT32 m_ulAuthoredDur; // as set by the "dur" attribute. INT32 m_lEndOffset; UINT32 m_ulAnticipatedPauseDur; UINT32 m_ulEndSync; ULONG32 m_ulStopTimeInExcl; ULONG32 m_ulLongSyncArcBeginInGroupTime; double m_fRepeatValue; UINT32 m_ulTimestamp; // timestamp to send packet SmilElementRestart m_restartBehavior; SmilElementRestart m_restartDefaultBehavior; ULONG32 m_ulSyncTolerance; ULONG32 m_ulSyncToleranceDefault; SMILSyncBehaviorType m_syncBehavior; SMILSyncBehaviorType m_syncBehaviorDefault; CHXString m_sensitivityToMouseEvents; CHXString m_title; CHXString m_author; CHXString m_copyright; CHXString m_abstract; CHXString m_alt; CHXString m_longdesc; ULONG32 m_ulReadIndex; SMILEventSourceTag m_nBeginEventSourceTag; CHXString m_BeginEventSourceID; INT32 m_lBeginEventClockValue; SMILEventSourceTag m_nEndEventSourceTag; CHXString m_EndEventSourceID; INT32 m_lEndEventClockValue; SMILEventSourceTag m_nEndsyncEventSourceTag; CHXString m_EndsyncEventSourceID; CSmilTimelineElement* m_pTimelineElement; CSmilElementHandler* m_pHandler; CHXSimpleList* m_pHyperlinks; CHXSimpleList* m_pBeginTimeList; CHXSimpleList* m_pEndTimeList; CHXString m_beginTransition; CHXString m_endTransition; FillType m_eFill; FillDefaultType m_eFillDefault; FillType m_eActualFill; EraseType m_eErase; UINT32 m_ulRemoveTime; CHXString m_customTestKey; char* m_pszClipBeginMarkerName; char* m_pszClipBeginExternalMarkerFileName; char* m_pszClipEndMarkerName; char* m_pszClipEndExternalMarkerFileName; AccessErrorBehavior m_eAccessErrorBehavior; UINT32 m_ulTimeDeferralOccurred; // ONLY HX_BITFIELD MEMBERS SHOULD GO BELOW THIS LINE! // ALL OTHER MEMBER TYPES SHOULD GO ABOVE THIS LINE! HX_BITFIELD m_bBeginOffsetSet : 1; HX_BITFIELD m_bNegBeginOffsetAlreadyUsed : 1; HX_BITFIELD m_bCurBeginIsOffsetFromSyncBase : 1;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -