⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hxsm.h

📁 linux下的一款播放器
💻 H
字号:
/* ***** BEGIN LICENSE BLOCK ***** * Source last modified: $Id: hxsm.h,v 1.6.2.1 2004/07/09 02:05:40 hubbe Exp $ *  * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved. *  * The contents of this file, and the files included with this file, * are subject to the current version of the RealNetworks Public * Source License (the "RPSL") available at * http://www.helixcommunity.org/content/rpsl unless you have licensed * the file under the current version of the RealNetworks Community * Source License (the "RCSL") available at * http://www.helixcommunity.org/content/rcsl, in which case the RCSL * will apply. You may also obtain the license terms directly from * RealNetworks.  You may not use this file except in compliance with * the RPSL or, if you have a valid RCSL with RealNetworks applicable * to this file, the RCSL.  Please see the applicable RPSL or RCSL for * the rights, obligations and limitations governing use of the * contents of the file. *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL") in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your version of * this file only under the terms of the GPL, and not to allow others * to use your version of this file under the terms of either the RPSL * or RCSL, indicate your decision by deleting the provisions above * and replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient may * use your version of this file under the terms of any one of the * RPSL, the RCSL or the GPL. *  * This file is part of the Helix DNA Technology. RealNetworks is the * developer of the Original Code and owns the copyrights in the * portions it created. *  * This file, and the files included with this file, is distributed * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET * ENJOYMENT OR NON-INFRINGEMENT. *  * Technology Compatibility Kit Test Suite(s) Location: *    http://www.helixcommunity.org/content/tck *  * Contributor(s): *  * ***** END LICENSE BLOCK ***** */#ifndef _HXSM_H_#define _HXSM_H_#include "hxtypes.h"#include "hxcom.h"#include "hxsmbw.h"#include "hxslist.h"class CHXSimpleList;class ASMRuleBook;struct IHXSourceBandwidthInfo;struct IHXErrorMessages;class ASMStreamInfo;class ASMSourceInfo;class HXSM;struct IHXValues;#define NUM_REPORTS_NEEDED_TO_UPSHIFT 4#define BW_DETECTION_DATA_POINTS 1024#define TCP_BANDWIDTH_WINDOW 20000class ASMSourceInfo : public IHXBandwidthManagerInput{public:    UINT32	m_ulLastReportTime;    UINT32	m_ulIncomingBandwidth;    UINT32	m_ulRateBeforeDeAccel;    INT32	m_lTimeDiffBase;  //this must be signed !!!    UINT32	m_ulBytesBehind;    INT32	m_lLastBehindTime;    UINT32	m_ulLastSetDelivery;    UINT32	m_ulSubscribedBw;    UINT32	m_ulMaxSubscribedBw;    UINT32	m_ulMasterOffer;    HX_BITFIELD	m_bBehind : 1;    HX_BITFIELD	m_bLossBehind : 1;    HX_BITFIELD	m_bSlightlyBehind : 1;    HX_BITFIELD	m_bTimeStampDelivery : 1;    HX_BITFIELD m_bPendingChill : 1;    HX_BITFIELD m_bInvalidUpReport : 1;    HX_BITFIELD	m_bPerfectPlay : 1;    HX_BITFIELD m_bIsDone : 1;    HX_BITFIELD m_bMayBeAccelerated : 1;    HX_BITFIELD m_bTryToUpShift : 1;    HX_BITFIELD	m_bAdjustBandwidth : 1;    UINT32	m_ulLowestBandwidthBeforeTimeStamp;    /*     * The following are switches used in load testing only to control     * whether or not any fall forward or fall back rate negotiation     * goes on. There is a master switch, m_bDisableBothAccelDecel,     * in the HXSM class that effects both of these swiches, globaly,     * for ALL sources regardless of URL option switches.     *      * Option switches are: "DoAccel", "DoDecel"     *     * NOTE: DoAccel and DoDecel control both Accelleration/Deceleration     *       and upshifting and downshifting of SureStream sources.     */    HX_BITFIELD m_bSourceAccelAllowed : 1;    HX_BITFIELD m_bSourceDecelAllowed : 1;private:    HX_BITFIELD m_bSlidingBwWindowReady : 1;public:    ASMRuleBook*    m_pMasterRuleBook;    ASMStreamInfo** m_pStreams;    CHXSimpleList   m_SubscriptionChanges;    UINT32  GetBandwidthSince(UINT32 ulTime, UINT32 ulNow);    UINT32  GetBandwidth();    TRANSPORT_TYPE			m_TransportType;    ASMSourceInfo(HXSource* pSource, HXSM* pHXASM);    ~ASMSourceInfo();    void Done();    STDMETHOD (QueryInterface ) (THIS_ REFIID ID, void** ppInterfaceObj);    STDMETHOD_(UINT32, AddRef ) (THIS);    STDMETHOD_(UINT32, Release) (THIS);    /*     *	IHXBandwidthManagerInput methods     */    STDMETHOD(ReportDataPacket)		(THIS_					UINT32 ulTimeStamp,					UINT32 ulArrivedTimeStamp,					UINT32 ulSize);    STDMETHOD(ReportUpshiftInfo)	(THIS_					UINT32 ulTimeStamp,					UINT32 ulSize);    STDMETHOD(ReportLatency)		(THIS_					UINT32 ulServerTime,					UINT32 ulClientTime);    STDMETHOD(SetCongestionFactor)	(THIS_					UINT32 ulFactor);    STDMETHOD(SetTransportType)		(THIS_					TRANSPORT_TYPE type);    HXSource*				m_pSource;    IHXSourceBandwidthInfo*		m_pSBI;    /* If the source has enough data, it may tell the bandwidth     * manager to cut down on accelerated buffering.     */    void    ChangeAccelerationStatus	(BOOL      bMayBeAccelerated,					 BOOL	   bUseAccelerationFactor,					 UINT32	   ulAccelerationFactor);private:    UINT32				THRESHOLD;    INT32				m_lOuterThreshold;    INT32				CalcBackup(UINT32, UINT32);    INT32				m_lRefCount;    typedef struct _BwDetectionData    {	UINT32	    m_ulSize;	UINT32	    m_ulTimeStamp;	UINT32	    m_ulATime;    } BwDetectionData;        /* For Bandwidth Detection */    BwDetectionData*			m_pBwDetectionData;    UINT32				m_ulBwDetectionDataLen;    UINT32				m_ulSlidingWindowLocation;    UINT32				m_ulBwDetectionDataCount;    HXSM*				m_pHXASM;private:    BOOL				AllocBWDetectionData(UINT32 ulReqSize);};class ASMStreamInfo{public:    BOOL				m_bTimeStampDelivery;    void				NotifyTimeStampDelivery();    void				NotifyLimitBandwidth(UINT32 ulBandwidth);    void				NotifyNewBandwidth();    void				SetLastBandwidth(UINT32 ulOffer);    ASMStreamInfo();    ~ASMStreamInfo();    ASMSourceInfo*			m_pASMSourceInfo;    IHXStreamBandwidthNegotiator*	m_pNegotiator;    IHXStreamBandwidthBias*		m_pBias;    IHXAtomicRuleGather*		m_pRuleGather;    UINT32				m_ulFixedBandwidth;    UINT32				m_ulLastBandwidth;    float*				m_pThreshold;    UINT32				m_ulNumThresholds;    UINT32				m_ulThresholdPosition;    UINT32				m_ulResistanceToLower;    UINT32				m_ulOffer;    UINT32				m_ulMasterRuleBookSetOffer;    UINT32				m_ulMaxEffectiveThreshold;    UINT32                              m_ulStreamNumber;};class HXSM : public IHXBandwidthManager{public:    HXSM();    ~HXSM();    STDMETHOD (QueryInterface ) (THIS_ REFIID ID, void** ppInterfaceObj);    STDMETHOD_(UINT32, AddRef ) (THIS);    STDMETHOD_(UINT32, Release) (THIS);    /*     *	IHXBandwidthManager methods     */    STDMETHOD(RegisterSource)	(THIS_				HXSource* pSource,				IUnknown* pUnknown);    STDMETHOD(RegisterSourcesDone)	(THIS);    STDMETHOD_(BOOL, NotEnoughBandwidth)(THIS);    STDMETHOD(UnRegisterSource)	(THIS_				HXSource* pSource);    /* If the source has enough data, it may tell the bandwidth     * manager to cut down on accelerated buffering.     */    STDMETHOD(ChangeAccelerationStatus)	(THIS_				HXSource* pSource,				BOOL	   bMayBeAccelerated,				BOOL	   bUseAccelerationFactor,				UINT32	   ulAccelerationFactor);    void UpShiftInfo(UINT32 ulTimeStamp, UINT32 ulSize);    /* Called by HXPlayer at end of each presentation */    STDMETHOD(PresentationDone)	(THIS);    STDMETHOD(ChangeBW) (THIS_ 		UINT32 newBW, HXSource* pSource);    typedef enum { HX_NONE, CONGESTION, INIT, INIT_REDIST, REDIST, REDO_ACCEL, CHILL_BUFFERING } RState;    RState		m_State;private:    INT32		m_lRefCount;    IHXValues*		m_pSubscriptionVariables;    CHXSimpleList*	m_pASMSourceInfo;    CHXSimpleList*	m_pASMStreamInfo;    UINT32		m_ulOriginalHighestBandwidthAvail;    UINT32		m_ulHighestBandwidthAvail;    UINT32		m_ulPeakUsedBandwidth;    UINT32		m_ulUpShiftTimes[5];    UINT32		m_ulUpShiftSizes[5];    UINT32		m_ulUpShiftRingPos;    UINT32		m_ulUpShiftBandwidthAvail;    UINT32		m_ulNumSources;    UINT32		m_ulMaxAccelBitRate;    UINT32		m_ulResistanceBitRate;    UINT32		m_ulOriginalResistanceBitRate;    INT32		m_ulNumReportsSinceUpShift;    UINT32		m_ulLastStableBandwidth;    UINT32		m_ulUpShiftTestPointScaleFactor;    UINT32		m_ulOfferToRecalc;    UINT32		m_ulNextPacketWindow;    INT32		m_lPacketCounter;    UINT32		m_ulUpShiftPastResistanceCount;    INT16		m_lLoss : 16;    HX_BITFIELD		m_bInitialHighBwAvail : 1;    HX_BITFIELD		m_bPipeFull : 1;    HX_BITFIELD		m_bUpShiftInfoReady : 1;    HX_BITFIELD		m_bDidOfferUpShiftToRecalc : 1;    HX_BITFIELD         m_bEnableSDB : 1;    /****************************************************************     * The following are switches used in load testing only to control     *  whether or not any fall forward or fall back rate negotiation     *  goes on. The acceleration or deceleration can be controled with     *  the m_bDoAccel and m_bDoDecel switches.  All rate changes can     *  be turned off with the m_bDisableBothAccelDecel switch which     *  overrides any values in the m_bDoAccel and m_bDoDecel switches.     *  if the m_bDisableBothAccelDecel switch is FALSE(0) then it has     *  no effect.     *      * Preference Keys are:     *                       DoAccel, DoDecel, LoadTest,     *                       DisableBothAccelDecel     *****************************************************************/    BOOL    m_bLoadTest;    BOOL    m_bDoAccel;    BOOL    m_bDoDecel;    BOOL    m_bDisableBothAccelDecel;    HXFLOAT m_fAccelerationFactor;#ifndef GOLD    IHXErrorMessages*	m_pEM;#endif    void Recalc();    void RecalcAccel();     friend class ASMSourceInfo;};#endif  /* ifndef _HXSM_H_ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -