bit5101.h

Bitek 公司 bit1611b模拟屏驱动芯片外接MCU驱动DEMO源码

/* **********************************************************************

         Copyright (c) 2002-2006 Beyond Innovation Technology Co., Ltd

        All rights are reserved. Reproduction in whole or in parts is
    prohibited without the prior written consent of the copyright owner.
   ----------------------------------------------------------------------

    Module: BIT5101.H

    Purpose: Interface of BIT5101.

    Version: 0.01                                   11:33AM  2005/11/17

    Compiler: Keil 8051 C Compiler v8.01

    Reference:
    [1] BIT5101 8051 MICROCONTROLLER WITH 64K FLASH AND ISP Version 0.01,
        2004/10/25, Beyond Innovation Technology

   ----------------------------------------------------------------------
    Modification:

    R0.01 11:33AM  2005/11/17 Jeffrey Chang
    Reason:
        1. Original.
    Solution:

   ********************************************************************** */

#ifndef _BIT5101_H_
#define _BIT5101_H_


/*  BYTE Registers  */
sfr P0      = 0x80;     // Port 0
sfr P1      = 0x90;     // Port 1
sfr P2      = 0xA0;     // Port 2
sfr P3      = 0xB0;     // Port 3
sfr P4      = 0xD8;     // Port 4 (BIT5101)


sfr SP      = 0x81;     // Stack Pointer

sfr DPL     = 0x82;     // Data Pointer Low
sfr DPH     = 0x83;     // Data Pointer high

sfr PCON    = 0x87;     // Power Control

sfr TCON    = 0x88;     // Timer Control
sfr TMOD    = 0x89;     // Timer Mode
sfr TL0     = 0x8A;     // Timer 0 Low
sfr TL1     = 0x8B;     // Timer 1 Low
sfr TH0     = 0x8C;     // Timer 0 High
sfr TH1     = 0x8D;     // Timer 1 High

sfr WDTC    = 0x8F;     // (BIT5101) Watchdog Timer Control Register

sfr SCON    = 0x98;     // Serial Control
sfr SBUF    = 0x99;     // Serial Data Buffer


sfr IE      = 0xA8;     // Interrupt Enable
sfr IP      = 0xB8;     // Interrupt Priority

sfr CHPCON  = 0xBF;     // (BIT5101) ISP Control Register
sfr XICON   = 0xC0;     // (BIT5101) External Interrupt Control

sfr PSW     = 0xD0;     // Program Status Word
sfr ACC     = 0xE0;     // Accumulator
sfr B       = 0xF0;     // B register

/* ISP SFR */
sfr ISP_CTRL= 0xE8;     // (BIT5101)
sfr ISP_ADDR= 0xE9;     // (BIT5101)


/* /// 8052 Extensions /// */
sfr T2CON   = 0xC8;     // Timer 2 Control
sfr T2MOD   = 0xC9;     // Timer 2 Mode Control
sfr RCAP2L  = 0xCA;     // Timer 2 Capture Low
sfr RCAP2H  = 0xCB;     // Timer 2 Capture High
sfr TL2     = 0xCC;     // Timer 2 Low
sfr TH2     = 0xCD;     // Timer 2 High


/*  BIT Registers  */

/*  TCON  */
sbit TF1    = 0x8F;
sbit TR1    = 0x8E;
sbit TF0    = 0x8D;
sbit TR0    = 0x8C;
sbit IE1    = 0x8B;
sbit IT1    = 0x8A;
sbit IE0    = 0x89;
sbit IT0    = 0x88;

/* Bit Register */
sbit P0_0   = 0x80;
sbit P0_1   = 0x81;
sbit P0_2   = 0x82;
sbit P0_3   = 0x83;
sbit P0_4   = 0x84;
sbit P0_5   = 0x85;
sbit P0_6   = 0x86;
sbit P0_7   = 0x87;

sbit P1_0   = 0x90;
sbit P1_1   = 0x91;
sbit P1_2   = 0x92;
sbit P1_3   = 0x93;
sbit P1_4   = 0x94;
sbit P1_5   = 0x95;
sbit P1_6   = 0x96;
sbit P1_7   = 0x97;

/*  T2  */
sbit T2EX   = 0x91;
sbit T2     = 0x90;

/*  SCON  */
sbit RI     = 0x98;
sbit TI     = 0x99;
sbit RB8    = 0x9A;
sbit TB8    = 0x9B;
sbit REN    = 0x9C;
sbit SM2    = 0x9D;
sbit SM1    = 0x9E;
sbit SM0    = 0x9F;

/*  P2  */
sbit P2_0   = 0xA0;
sbit P2_1   = 0xA1;
sbit P2_2   = 0xA2;
sbit P2_3   = 0xA3;
sbit P2_4   = 0xA4;
sbit P2_5   = 0xA5;
sbit P2_6   = 0xA6;
sbit P2_7   = 0xA7;

/*  IE  */
sbit EX0    = 0xA8;
sbit ET0    = 0xA9;
sbit EX1    = 0xAA;
sbit ET1    = 0xAB;
sbit ES     = 0xAC;
sbit ET2    = 0xAD;
sbit EA     = 0xAF;

/*  P3  */
sbit P3_0   = 0xB0;
sbit P3_1   = 0xB1;
sbit P3_2   = 0xB2;
sbit P3_3   = 0xB3;
sbit P3_4   = 0xB4;
sbit P3_5   = 0xB5;
sbit P3_6   = 0xB6;
sbit P3_7   = 0xB7;

/*  P3  */
sbit RXD    = 0xB0;
sbit TXD    = 0xB1;
sbit INT0   = 0xB2;
sbit INT1   = 0xB3;
sbit T0     = 0xB4;
sbit T1     = 0xB5;
sbit WR     = 0xB6;
sbit RD     = 0xB7;


/* XICON */
sbit IT2    = 0xC0;     // External interrupt 2 is falling-edge/low-level
sbit IE2    = 0xC1;
sbit EX2    = 0xC2;     // External interrupt 2 enable
sbit PX2    = 0xC3;     // External interrupt 2
sbit IT3    = 0xC4;     // External interrupt 3 is falling-edge/low-level
sbit IE3    = 0xC5;
sbit EX3    = 0xC6;     // External interrupt 3 enable
sbit PX3    = 0xC7;     // External interrupt 3

/*  T2CON  */
sbit CP_RL2 = 0xC8;
sbit C_T2   = 0xC9;         // C/nT2
sbit TR2    = 0xCA;
sbit EXEN2  = 0xCB;
sbit TCLK   = 0xCC;
sbit RCLK   = 0xCD;
sbit EXF2   = 0xCE;
sbit TF2    = 0xCF;

/*  PSW  */
sbit P      = 0xD0;
sbit OV     = 0xD2;
sbit RS0    = 0xD3;
sbit RS1    = 0xD4;
sbit F0     = 0xD5;
sbit AC     = 0xD6;
sbit CY     = 0xD7;

/*  P4  */
sbit P4_0   = 0xD8;     // (BIT5101)
sbit P4_1   = 0xD9;     // (BIT5101)
sbit P4_2   = 0xDA;     // (BIT5101)
sbit P4_3   = 0xDB;     // (BIT5101)

#endif /* _BIT5101_H_ */


/* **********************************************************************

    Description:

   ********************************************************************** */

/* %% End Of File %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */