📄 mferrno.h
字号:
///////////////////////////////////////////////////////////////////////////////
// Copyright (c), Philips Semiconductors Gratkorn
//
// (C)PHILIPS Electronics N.V. 2000
// All rights are reserved.
// Philips reserves the right to make changes without notice at any time.
// Philips makes no warranty, expressed, implied or statutory, including but
// not limited to any implied warranty of merchantibility or fitness for any
//particular purpose, or that the use will not infringe any third party patent,
// copyright or trademark. Philips must not be liable for any loss or damage
// arising from its use.
///////////////////////////////////////////////////////////////////////////////
//
// Projekt : CommonLib
// Files : CommonLib.h CommonLib.c OsDefs.h MfErrNo.h DesEncryption.c
// Created : 01.04.00
//
// COMMENT: This header contains error codes for CommonLib project
// MODIFICATIONS:
// 29.11.00 HB first issue
// 08.01.01 JW updated error codes (including MfRc500, MfRd260 error codes)
// 02.08.01 TR updated error codes (inlcuding RdMUX error codes)
///////////////////////////////////////////////////////////////////////////////
#ifndef MFERRNO_H
#define MFERRNO_H
#ifdef __cplusplus
extern "C" {
#endif
//////////////////////////////////////////////////////////////////////////////
// INCLUDES
//////////////////////////////////////////////////////////////////////////////
#include "OsDefs.h"
//////////////////////////////////////////////////////////////////////////////
// Reader Error Codes Base Address Start: 0000
// Base Address End: -999
//////////////////////////////////////////////////////////////////////////////
#define READER_ERR_BASE_START 0
#define MI_OK 0
#define MI_CHK_OK 0
#define MI_CRC_ZERO 0
// ICODE1 Error Codes
#define I1_OK 0
#define I1_NO_ERR 0
#define MI_CRC_NOTZERO 1
#define MI_NOTAGERR (-1)
#define MI_CHK_FAILED (-1)
#define MI_CRCERR (-2)
#define MI_CHK_COMPERR (-2)
#define MI_EMPTY (-3)
#define MI_AUTHERR (-4)
#define MI_PARITYERR (-5)
#define MI_CODEERR (-6)
#define MI_SERNRERR (-8)
#define MI_KEYERR (-9)
#define MI_NOTAUTHERR (-10)
#define MI_BITCOUNTERR (-11)
#define MI_BYTECOUNTERR (-12)
#define MI_IDLE (-13)
#define MI_TRANSERR (-14)
#define MI_WRITEERR (-15)
#define MI_INCRERR (-16)
#define MI_DECRERR (-17)
#define MI_READERR (-18)
#define MI_OVFLERR (-19)
#define MI_POLLING (-20)
#define MI_FRAMINGERR (-21)
#define MI_ACCESSERR (-22)
#define MI_UNKNOWN_COMMAND (-23)
#define MI_COLLERR (-24)
#define MI_RESETERR (-25)
#define MI_INITERR (-25)
#define MI_INTERFACEERR (-26)
#define MI_ACCESSTIMEOUT (-27)
#define MI_NOBITWISEANTICOLL (-28)
#define MI_QUIT (-30)
#define MI_CODINGERR (-31)
#define MI_SENDBYTENR (-51)
#define MI_CASCLEVEX (-52)
#define MI_SENDBUF_OVERFLOW (-53)
#define MI_BAUDRATE_NOT_SUPPORTED (-54)
#define MI_SAME_BAUDRATE_REQUIRED (-55)
#define MI_WRONG_PARAMETER_VALUE (-60)
// ICODE1 Error Codes
#define I1_WRONGPARAM (-61)
#define I1_NYIMPLEMENTED (-62)
#define I1_TSREADY (-63)
#define I1_TIMEOUT (-70)
#define I1_NOWRITE (-71)
#define I1_NOHALT (-72)
#define I1_MISS_ANTICOLL (-73)
#define I1_COMM_ABORT (-82)
#define MI_BREAK (-99)
#define MI_NY_IMPLEMENTED (-100)
#define MI_NO_MFRC (-101)
#define MI_MFRC_NOTAUTH (-102)
#define MI_WRONG_DES_MODE (-103)
#define MI_HOST_AUTH_FAILED (-104)
#define MI_WRONG_LOAD_MODE (-106)
#define MI_WRONG_DESKEY (-107)
#define MI_MKLOAD_FAILED (-108)
#define MI_FIFOERR (-109)
#define MI_WRONG_ADDR (-110)
#define MI_DESKEYLOAD_FAILED (-111)
#define MI_WRONG_SEL_CNT (-114)
#define MI_WRONG_TEST_MODE (-117)
#define MI_TEST_FAILED (-118)
#define MI_TOC_ERROR (-119)
#define MI_COMM_ABORT (-120)
#define MI_INVALID_BASE (-121)
#define MI_MFRC_RESET (-122)
#define MI_WRONG_VALUE (-123)
#define MI_VALERR (-124)
#define MI_WRONG_MAC_TOKEN (-149)
#define MI_WRONG_TOKEN (-150)
#define MI_NO_VALUE (-151)
#define MI_MFRC150 (-152)
#define MI_MFRC170 (-153)
#define MI_WRONG_BASEADDR (-180)
#define MI_NO_ERROR_TEXT_AVAIL (-199)
#define MI_DRIVER_FAILURE (-254)
#define MI_INTERFACE_FAILURE (-255)
#define MI_PROTOCOL_FAILURE (-256)
#define MI_SERERR (-260)
#define MI_CALLOPEN (-261)
#define MI_RESERVED_BUFFER_OVERFLOW (-262)
#define MI_RECBUF_OVERFLOW MI_RESERVED_BUFFER_OVERFLOW
#define READER_ERR_BASE_END (-999)
//////////////////////////////////////////////////////////////////////////////
// HostRdCom Error Codes Base Address Start: -1000
// Base Address End: -1100
//////////////////////////////////////////////////////////////////////////////
#define COM_ERR_BASE_START (-1000)
#define COM_SUCCESS 0
#define COM_ERROR (COM_ERR_BASE_START -1)
#define COM_NO_INTERFACE_HANDLE (COM_ERR_BASE_START -2)
#define COM_INTERFACE_OPEN (COM_ERR_BASE_START -3)
#define COM_INTERFACE_NOT_OPEN (COM_ERR_BASE_START -4)
#define COM_CREATE_FILE_FAILED (COM_ERR_BASE_START -5)
#define COM_PURGE_COMM_FAILED (COM_ERR_BASE_START -6)
#define COM_GET_COMM_STATE_FAILED (COM_ERR_BASE_START -7)
#define COM_SETUP_COMM_FAILED (COM_ERR_BASE_START -8)
#define COM_SET_COMM_STATE_FAILED (COM_ERR_BASE_START -9)
#define COM_SET_COMM_MASK_FAILED (COM_ERR_BASE_START -10)
#define COM_SET_COMM_TIMEOUTS_FAILED (COM_ERR_BASE_START -11)
#define COM_WRONG_VALUE (COM_ERR_BASE_START -12)
#define COM_WSASTARTUP_FAILED (COM_ERR_BASE_START -13)
#define COM_WSA_SOCKET_FAILED (COM_ERR_BASE_START -14)
#define COM_GETSOCKOPT_FAILED (COM_ERR_BASE_START -15)
#define COM_READER_NOT_IN_RANGE (COM_ERR_BASE_START -16)
#define COM_CONNECT_FAILED (COM_ERR_BASE_START -17)
#define COM_NEW_FAILED (COM_ERR_BASE_START -18)
#define COM_INVALID_WT_HANDLE (COM_ERR_BASE_START -19) // WT - Worker thread
#define COM_START_WT_FAILED (COM_ERR_BASE_START -20) // WT - Worker thread
#define COM_INVALID_CB_HANDLE (COM_ERR_BASE_START -21) // CB - Callback
#define COM_LEN_OVERFLOW (COM_ERR_BASE_START -22)
#define COM_RS232_SERCOM_ERR (COM_ERR_BASE_START -23)
#define COM_RS232_SEND_CMD_NO_DLE_ERR (COM_ERR_BASE_START -24)
#define COM_RS232_SEND_DEVICE_ERR (COM_ERR_BASE_START -25)
#define COM_RS232_RESP_CMD_NAK_ERR (COM_ERR_BASE_START -26)
#define COM_TIMEOUT (COM_ERR_BASE_START -27)
#define COM_RS232_RESP_TO_ERR (COM_ERR_BASE_START -28)
#define COM_RS232_RESP_OVERFLOW_ERR (COM_ERR_BASE_START -29)
#define COM_RS232_RECV_DEVICE_ERR (COM_ERR_BASE_START -30)
#define COM_RS232_RESP_UNDERFLOW_ERR (COM_ERR_BASE_START -31)
#define COM_RS232_DATALENGTH_ERR (COM_ERR_BASE_START -32)
#define COM_RS232_CHECKSUM_ERR (COM_ERR_BASE_START -33)
#define COM_RS232_TX_RX_SEQ_ERR (COM_ERR_BASE_START -34)
#define COM_RS232_COPY_DATA_ERR (COM_ERR_BASE_START -35)
#define COM_IRDA_SELECT_FAILED (COM_ERR_BASE_START -36)
#define COM_IRDA_SEND_TIMEOUT (COM_ERR_BASE_START -37)
#define COM_IRDA_SOCKET_NOT_READY (COM_ERR_BASE_START -38)
#define COM_IRDA_SEND_DEVICE_ERR (COM_ERR_BASE_START -39)
#define COM_IRDA_RECV_DEVICE_ERR (COM_ERR_BASE_START -40)
#define COM_IRDA_RECV_TIMEOUT (COM_ERR_BASE_START -41)
#define COM_IRDA_TX_RX_SEQ_ERR (COM_ERR_BASE_START -42)
#define COM_IRDA_COPY_DATA_ERR (COM_ERR_BASE_START -43)
#define COM_IRDA_LEN_ERR (COM_ERR_BASE_START -44)
#define COM_NO_PROTOCOL_SET (COM_ERR_BASE_START -45)
#define COM_USB_DLL_LOAD_ERR (COM_ERR_BASE_START -46)
#define COM_USB_MISSING_FCT_ADDR (COM_ERR_BASE_START -47)
#define COM_USB_SEND_DEVICE_ERR (COM_ERR_BASE_START -48)
#define COM_USB_RECV_DEVICE_ERR (COM_ERR_BASE_START -49)
#define COM_USB_TX_RX_SEQ_ERR (COM_ERR_BASE_START -50)
#define COM_USB_LEN_ERR (COM_ERR_BASE_START -51)
#define COM_USB_COPY_DATA_ERR (COM_ERR_BASE_START -52)
#define COM_USB_NO_DEVICE_FOUND (COM_ERR_BASE_START -53)
#define COM_USB_SEND_TIMEOUT (COM_ERR_BASE_START -54)
#define COM_USB_RECV_TIMEOUT (COM_ERR_BASE_START -55)
#define COM_USB_FILE_NOT_FOUND (COM_ERR_BASE_START -56)
#define COM_USB_ACCESS_DENIED (COM_ERR_BASE_START -57)
#define COM_RS232_ETX_DLE_EXPECTED (COM_ERR_BASE_START -58)
#define COM_ERR_BASE_END (COM_ERR_BASE_START -99)
//////////////////////////////////////////////////////////////////////////////
// T=CL Error Codes Base Address Start: -1100
// Base Address End: -1150
//////////////////////////////////////////////////////////////////////////////
#define TCL_ERR_BASE_START (COM_ERR_BASE_END -1)
#define TCL_OK 0
#define TCL_NOTAGERR (TCL_ERR_BASE_START -1)
#define TCL_CRCERR (TCL_ERR_BASE_START -2)
#define TCL_PRITYERR (TCL_ERR_BASE_START -3)
#define TCL_OTHERERR (TCL_ERR_BASE_START -4)
#define TCL_SERNRERR (TCL_ERR_BASE_START -5)
#define TCL_BITCOUNTERR (TCL_ERR_BASE_START -6)
#define TCL_POLLING (TCL_ERR_BASE_START -7)
#define TCL_RF_CHANNEL (TCL_ERR_BASE_START -8)
#define TCL_MULTACT_DISABLED (TCL_ERR_BASE_START -9)
#define TCL_MULTACT_ENABLED (TCL_ERR_BASE_START -10)
#define TCL_CID_NOT_ACTIVE (TCL_ERR_BASE_START -11)
#define TCL_BITANTICOLL (TCL_ERR_BASE_START -12)
#define TCL_UIDLEN (TCL_ERR_BASE_START -13)
#define TCL_CIDINVALID (TCL_ERR_BASE_START -14)
#define TCL_ATSLEN (TCL_ERR_BASE_START -15)
#define TCL_NO_ATS_AVAILABLE (TCL_ERR_BASE_START -16)
#define TCL_ATS_ERROR (TCL_ERR_BASE_START -17)
#define TCL_FATAL_PROTOCOL (TCL_ERR_BASE_START -18)
#define TCL_RECBUF_OVERFLOW (TCL_ERR_BASE_START -19)
#define TCL_SENDBYTENR (TCL_ERR_BASE_START -20)
#define TCL_TRANSMERR_HALTED (TCL_ERR_BASE_START -21)
#define TCL_TRANSMERR_NOTAG (TCL_ERR_BASE_START -22)
#define TCL_BAUDRATE_NOT_SUPPORTED_PICC (TCL_ERR_BASE_START -23)
#define TCL_CID_NOT_SUPPORTED (TCL_ERR_BASE_START -24)
#define TCL_NAD_NOT_SUPPORTED (TCL_ERR_BASE_START -25)
#define TCL_PROTOCOL_NOT_SUPPORTED (TCL_ERR_BASE_START -26)
#define TCL_PPS_FORMAT (TCL_ERR_BASE_START -27)
#define TCL_ERROR (TCL_ERR_BASE_START -28)
#define TCL_NADINVALID (TCL_ERR_BASE_START -30)
#define TCL_OTHER_ERR (TCL_ERR_BASE_START -31)
#define TCL_BAUDRATE_NOT_SUPPORTED_PCD (TCL_ERR_BASE_START -32)
#define TCL_CID_ACTIVE (TCL_ERR_BASE_START -33)
#define TCL_ERR_BASE_END (TCL_ERR_BASE_START -49)
//////////////////////////////////////////////////////////////////////////////
// RdMUXError Codes Base Address Start: -1200
// Base Address End: -1250
// Author: TR
//////////////////////////////////////////////////////////////////////////////
#define RdMUX_ERR_BASE_START (TCL_ERR_BASE_END -51)
#define RdMUX_OK 0
#define RdMUX_NO_RD_AVAIL (RdMUX_ERR_BASE_START -1)
#define RdMUX_RdINDEX_OUT_OF_RANGE (RdMUX_ERR_BASE_START -2)
#define RdMUX_MUXMODE_NOT_SUPPORTED_RM (RdMUX_ERR_BASE_START -3)
#define RdMUX_SELECTED_RD_NAVAIL (RdMUX_ERR_BASE_START -4)
#define RdMUX_UNKNOWN_PARAMIDX (RdMUX_ERR_BASE_START -5)
#define RdMUX_SELECTIONLIST_EMPTY (RdMUX_ERR_BASE_START -6)
#define RdMUX_CHANGES_TREATED (RdMUX_ERR_BASE_START -7)
#define RdMUX_ERR_BASE_END (RdMUX_ERR_BASE_START -49)
// Don't forget to provide error messages for added errors in MfErrNo.c!!
// At the end of a new added error block specify the next base address!!
// Next Base: -1250
// ---------------------------------------------------------------------------
// FUNCTION: GetErrMsg
// IN: err_nr Error number for which the appropriate error message
// is needed
// OUT: -
// RETURN: Appropriate error message for passed error number
// COMMENT: Searches the ErrList for the passed error number.
// If the error number is found, the approriate error number is
// return, otherwise "Unknown error" is returned.
// ---------------------------------------------------------------------------
DLLEXP_IMP char* GetErrMsg(short err_nr);
#ifdef __cplusplus
}
#endif
#endif // COMMON_H
//////////////////////////////////////////////////////////////////////////////
// End of File
//////////////////////////////////////////////////////////////////////////////⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -