📄 avcodec.h
字号:
/**
* macroblock compare function (not supported yet).
* - encoding: set by user.
* - decoding: unused
*/
int mb_cmp;
/**
* interlaced dct compare function
* - encoding: set by user.
* - decoding: unused
*/
int ildct_cmp;
#define FF_CMP_SAD 0
#define FF_CMP_SSE 1
#define FF_CMP_SATD 2
#define FF_CMP_DCT 3
#define FF_CMP_PSNR 4
#define FF_CMP_BIT 5
#define FF_CMP_RD 6
#define FF_CMP_ZERO 7
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
#define FF_CMP_W53 11
#define FF_CMP_W97 12
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_CHROMA 256
/**
* ME diamond size & shape.
* - encoding: set by user.
* - decoding: unused
*/
int dia_size;
/**
* amount of previous MV predictors (2a+1 x 2a+1 square).
* - encoding: set by user.
* - decoding: unused
*/
int last_predictor_count;
/**
* pre pass for motion estimation.
* - encoding: set by user.
* - decoding: unused
*/
int pre_me;
/**
* motion estimation pre pass compare function.
* - encoding: set by user.
* - decoding: unused
*/
int me_pre_cmp;
/**
* ME pre pass diamond size & shape.
* - encoding: set by user.
* - decoding: unused
*/
int pre_dia_size;
/**
* subpel ME quality.
* - encoding: set by user.
* - decoding: unused
*/
int me_subpel_quality;
/**
* callback to negotiate the pixelFormat.
* @param fmt is the list of formats which are supported by the codec,
* its terminated by -1 as 0 is a valid format, the formats are ordered by quality
* the first is allways the native one
* @return the choosen format
* - encoding: unused
* - decoding: set by user, if not set then the native format will always be choosen
*/
enum PixelFormat (*get_format)(struct AVCodecContext *s, const enum PixelFormat * fmt);
/**
* DTG active format information (additionnal aspect ratio
* information only used in DVB MPEG2 transport streams). 0 if
* not set.
*
* - encoding: unused.
* - decoding: set by decoder
*/
int dtg_active_format;
#define FF_DTG_AFD_SAME 8
#define FF_DTG_AFD_4_3 9
#define FF_DTG_AFD_16_9 10
#define FF_DTG_AFD_14_9 11
#define FF_DTG_AFD_4_3_SP_14_9 13
#define FF_DTG_AFD_16_9_SP_14_9 14
#define FF_DTG_AFD_SP_4_3 15
/**
* Maximum motion estimation search range in subpel units.
* if 0 then no limit
*
* - encoding: set by user.
* - decoding: unused.
*/
int me_range;
/**
* intra quantizer bias.
* - encoding: set by user.
* - decoding: unused
*/
int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
* inter quantizer bias.
* - encoding: set by user.
* - decoding: unused
*/
int inter_quant_bias;
/**
* color table ID.
* - encoding: unused.
* - decoding: which clrtable should be used for 8bit RGB images
* table have to be stored somewhere FIXME
*/
int color_table_id;
/**
* internal_buffer count.
* Don't touch, used by lavc default_get_buffer()
*/
int internal_buffer_count;
/**
* internal_buffers.
* Don't touch, used by lavc default_get_buffer()
*/
void *internal_buffer;
#define FF_LAMBDA_SHIFT 7
#define FF_LAMBDA_SCALE (1<<FF_LAMBDA_SHIFT)
#define FF_QP2LAMBDA 118 ///< factor to convert from H.263 QP to lambda
#define FF_LAMBDA_MAX (256*128-1)
#define FF_QUALITY_SCALE FF_LAMBDA_SCALE //FIXME maybe remove
/**
* global quality for codecs which cannot change it per frame.
* this should be proportional to MPEG1/2/4 qscale.
* - encoding: set by user.
* - decoding: unused
*/
int global_quality;
#define FF_CODER_TYPE_VLC 0
#define FF_CODER_TYPE_AC 1
/**
* coder type
* - encoding: set by user.
* - decoding: unused
*/
int coder_type;
/**
* context model
* - encoding: set by user.
* - decoding: unused
*/
int context_model;
#if 0
/**
*
* - encoding: unused
* - decoding: set by user.
*/
uint8_t * (*realloc)(struct AVCodecContext *s, uint8_t *buf, int buf_size);
#endif
/**
* slice flags
* - encoding: unused
* - decoding: set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
/**
* XVideo Motion Acceleration
* - encoding: forbidden
* - decoding: set by decoder
*/
int xvmc_acceleration;
/**
* macroblock decision mode
* - encoding: set by user.
* - decoding: unused
*/
int mb_decision;
#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
#define FF_MB_DECISION_RD 2 ///< rate distoration
/**
* custom intra quantization matrix
* - encoding: set by user, can be NULL
* - decoding: set by lavc
*/
uint16_t *intra_matrix;
/**
* custom inter quantization matrix
* - encoding: set by user, can be NULL
* - decoding: set by lavc
*/
uint16_t *inter_matrix;
/**
* fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* this is used to workaround some encoder bugs
* - encoding: unused
* - decoding: set by user, will be converted to upper case by lavc during init
*/
unsigned int stream_codec_tag;
/**
* scene change detection threshold.
* 0 is default, larger means fewer detected scene changes
* - encoding: set by user.
* - decoding: unused
*/
int scenechange_threshold;
/**
* minimum lagrange multipler
* - encoding: set by user.
* - decoding: unused
*/
int lmin;
/**
* maximum lagrange multipler
* - encoding: set by user.
* - decoding: unused
*/
int lmax;
/**
* Palette control structure
* - encoding: ??? (no palette-enabled encoder yet)
* - decoding: set by user.
*/
struct AVPaletteControl *palctrl;
/**
* noise reduction strength
* - encoding: set by user.
* - decoding: unused
*/
int noise_reduction;
/**
* called at the beginning of a frame to get cr buffer for it.
* buffer type (size, hints) must be the same. lavc won't check it.
* lavc will pass previous buffer in pic, function should return
* same buffer or new buffer with old frame "painted" into it.
* if pic.data[0] == NULL must behave like get_buffer().
* - encoding: unused
* - decoding: set by lavc, user can override
*/
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* number of bits which should be loaded into the rc buffer before decoding starts
* - encoding: set by user.
* - decoding: unused
*/
int rc_initial_buffer_occupancy;
/**
*
* - encoding: set by user.
* - decoding: unused
*/
int inter_threshold;
/**
* CODEC_FLAG2_*.
* - encoding: set by user.
* - decoding: set by user.
*/
int flags2;
/**
* simulates errors in the bitstream to test error concealment.
* - encoding: set by user.
* - decoding: unused.
*/
int error_rate;
/**
* MP3 antialias algorithm, see FF_AA_* below.
* - encoding: unused
* - decoding: set by user
*/
int antialias_algo;
#define FF_AA_AUTO 0
#define FF_AA_FASTINT 1 //not implemented yet
#define FF_AA_INT 2
#define FF_AA_FLOAT 3
/**
* Quantizer noise shaping.
* - encoding: set by user
* - decoding: unused
*/
int quantizer_noise_shaping;
/**
* Thread count.
* is used to decide how many independant tasks should be passed to execute()
* - encoding: set by user
* - decoding: set by user
*/
int thread_count;
/**
* the codec may call this to execute several independant things. it will return only after
* finishing all tasks, the user may replace this with some multithreaded implementation, the
* default implementation will execute the parts serially
* @param count the number of things to execute
* - encoding: set by lavc, user can override
* - decoding: set by lavc, user can override
*/
int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void **arg2, int *ret, int count);
/**
* Thread opaque.
* can be used by execute() to store some per AVCodecContext stuff.
* - encoding: set by execute()
* - decoding: set by execute()
*/
void *thread_opaque;
/**
* Motion estimation threshold. under which no motion estimation is
* performed, but instead the user specified motion vectors are used
*
* - encoding: set by user
* - decoding: unused
*/
int me_threshold;
/**
* Macroblock threshold. under which the user specified macroblock types will be used
* - encoding: set by user
* - decoding: unused
*/
int mb_threshold;
/**
* precision of the intra dc coefficient - 8.
* - encoding: set by user
* - decoding: unused
*/
int intra_dc_precision;
/**
* noise vs. sse weight for the nsse comparsion function.
* - encoding: set by user
* - decoding: unused
*/
int nsse_weight;
/**
* number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: set by user
*/
int skip_top;
/**
* number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: set by user
*/
int skip_bottom;
/**
* profile
* - encoding: set by user
* - decoding: set by lavc
*/
int profile;
#define FF_PROFILE_UNKNOWN -99
/**
* level
* - encoding: set by user
* - decoding: set by lavc
*/
int level;
#define FF_LEVEL_UNKNOWN -99
/**
* low resolution decoding. 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: set by user
*/
int lowres;
/**
* bitsream width / height. may be different from width/height if lowres
* or other things are used
* - encoding: unused
* - decoding: set by user before init if known, codec should override / dynamically change if needed
*/
int coded_width, coded_height;
/**
* frame skip threshold
* - encoding: set by user
* - decoding: unused
*/
int frame_skip_threshold;
/**
* frame skip factor
* - encoding: set by user
* - decoding: unused
*/
int frame_skip_factor;
/**
* frame skip exponent
* - encoding: set by user
* - decoding: unused
*/
int frame_skip_exp;
/**
* frame skip comparission function
* - encoding: set by user.
* - decoding: unused
*/
int frame_skip_cmp;
/**
* border processing masking. raises the quantizer for mbs on the borders
* of the picture.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -