laststmtchanges.test

sqlite数据库源码

# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Tests to make sure that value returned by last_statement_change_count()
# (LSCC) is updated properly, especially inside triggers
#
# Note 1: LSCC remains constant within a statement and only updates once
#           the statement is finished (triggers count as part of statement)
# Note 2: LSCC is changed within the context of a trigger
#           much like last_insert_rowid() (see lastinsert.test),
#           but is restored once the trigger exits
# Note 3: LSCC is not changed by a change to a view (since everything
#           is done within instead of trigger context)
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# ----------------------------------------------------------------------------
# 1.x - basic tests (no triggers)

# LSCC set properly after insert
do_test laststmtchanges-1.1 {
    catchsql {
        create table t0 (x);
        insert into t0 values (1);
        insert into t0 values (1);
        insert into t0 values (2);
        insert into t0 values (2);
        insert into t0 values (1);
        insert into t0 values (1);
        insert into t0 values (1);
        insert into t0 values (2);
        select last_statement_change_count();
    }
} {0 1}

# LSCC set properly after update
do_test laststmtchanges-1.2 {
    catchsql {
        update t0 set x=3 where x=1;
        select last_statement_change_count();
    }
} {0 5}

# LSCC unchanged within an update statement
do_test laststmtchanges-1.3 {
    catchsql {
        update t0 set x=x+last_statement_change_count() where x=3;
        select count() from t0 where x=8;
    }
} {0 5}

# LSCC set properly after update on table where no rows changed
do_test laststmtchanges-1.4 {
    catchsql {
        update t0 set x=77 where x=88;
        select last_statement_change_count();
    }
} {0 0}

# LSCC set properly after delete from table
do_test laststmtchanges-1.5 {
    catchsql {
        delete from t0 where x=2;
        select last_statement_change_count();
    }
} {0 3}

# ----------------------------------------------------------------------------
# 2.x - tests with after insert trigger

# LSCC changed properly after insert into table containing after trigger
do_test laststmtchanges-2.1 {
    catchsql {
        create table t1 (k integer primary key);
        create table t2 (k integer primary key, v1, v2);
        create trigger r1 after insert on t1 for each row begin
            insert into t2 values (NULL, last_statement_change_count(), NULL);
            update t0 set x=x;
            update t2 set v2=last_statement_change_count();
        end;
        insert into t1 values (77);
        select last_statement_change_count();
    }
} {0 1}

# LSCC unchanged upon entry into after insert trigger
do_test laststmtchanges-2.2 {
    catchsql {
        select v1 from t2;
    }
} {0 3}

# LSCC changed properly by update within context of after insert trigger
do_test laststmtchanges-2.3 {
    catchsql {
        select v2 from t2;
    }
} {0 5}

# ----------------------------------------------------------------------------
# 3.x - tests with after update trigger

# LSCC changed properly after update into table containing after trigger
do_test laststmtchanges-3.1 {
    catchsql {
        drop trigger r1;
        delete from t2; delete from t2;
        create trigger r1 after update on t1 for each row begin
            insert into t2 values (NULL, last_statement_change_count(), NULL);
            delete from t0 where oid=1 or oid=2;
            update t2 set v2=last_statement_change_count();
        end;
        update t1 set k=k;
        select last_statement_change_count();
    }
} {0 1}

# LSCC unchanged upon entry into after update trigger
do_test laststmtchanges-3.2 {
    catchsql {
        select v1 from t2;
    }
} {0 0}

# LSCC changed properly by delete within context of after update trigger
do_test laststmtchanges-3.3 {
    catchsql {
        select v2 from t2;
    }
} {0 2}

# ----------------------------------------------------------------------------
# 4.x - tests with before delete trigger

# LSCC changed properly on delete from table containing before trigger
do_test laststmtchanges-4.1 {
    catchsql {
        drop trigger r1;
        delete from t2; delete from t2;
        create trigger r1 before delete on t1 for each row begin
            insert into t2 values (NULL, last_statement_change_count(), NULL);
            insert into t0 values (5);
            update t2 set v2=last_statement_change_count();
        end;
        delete from t1;
        select last_statement_change_count();
    }
} {0 1}

# LSCC unchanged upon entry into before delete trigger
do_test laststmtchanges-4.2 {
    catchsql {
        select v1 from t2;
    }
} {0 0}

# LSCC changed properly by insert within context of before delete trigger
do_test laststmtchanges-4.3 {
    catchsql {
        select v2 from t2;
    }
} {0 1}

# ----------------------------------------------------------------------------
# 5.x - complex tests with temporary tables and nested instead of triggers

do_test laststmtchanges-5.1 {
    catchsql {
        drop table t0; drop table t1; drop table t2;
        create temp table t0(x);
        create temp table t1 (k integer primary key);
        create temp table t2 (k integer primary key);
        create temp view v1 as select * from t1;
        create temp view v2 as select * from t2;
        create temp table n1 (k integer primary key, n);
        create temp table n2 (k integer primary key, n);
        insert into t0 values (1);
        insert into t0 values (2);
        insert into t0 values (1);
        insert into t0 values (1);
        insert into t0 values (1);
        insert into t0 values (2);
        insert into t0 values (2);
        insert into t0 values (1);
        create temp trigger r1 instead of insert on v1 for each row begin
            insert into n1 values (NULL, last_statement_change_count());
            update t0 set x=x*10 where x=1;
            insert into n1 values (NULL, last_statement_change_count());
            insert into t1 values (NEW.k);
            insert into n1 values (NULL, last_statement_change_count());
            update t0 set x=x*10 where x=0;
            insert into v2 values (100+NEW.k);
            insert into n1 values (NULL, last_statement_change_count());
        end;
        create temp trigger r2 instead of insert on v2 for each row begin
            insert into n2 values (NULL, last_statement_change_count());
            insert into t2 values (1000+NEW.k);
            insert into n2 values (NULL, last_statement_change_count());
            update t0 set x=x*100 where x=0;
            insert into n2 values (NULL, last_statement_change_count());
            delete from t0 where x=2;
            insert into n2 values (NULL, last_statement_change_count());
        end;
        insert into t1 values (77);
        select last_statement_change_count();
    }
} {0 1}

do_test laststmtchanges-5.2 {
    catchsql {
        delete from t1 where k=88;
        select last_statement_change_count();
    }
} {0 0}

do_test laststmtchanges-5.3 {
    catchsql {
        insert into v1 values (5);
        select last_statement_change_count();
    }
} {0 0}

do_test laststmtchanges-5.4 {
    catchsql {
        select n from n1;
    }
} {0 {0 5 1 0}}

do_test laststmtchanges-5.5 {
    catchsql {
        select n from n2;
    }
} {0 {0 1 0 3}}

finish_test