attention.i

使用avr--cc2420模块程序,需要原理图的联系 QQ:120304948

// CodeVisionAVR C Compiler
// (C) 1998-2004 Pavel Haiduc, HP InfoTech S.R.L.

// I/O registers definitions for the ATmega128


#pragma used+
sfrb PINF=0;
sfrb PINE=1;
sfrb DDRE=2;
sfrb PORTE=3;
sfrb ADCL=4;
sfrb ADCH=5;
sfrw ADCW=4;      // 16 bit access
sfrb ADCSRA=6;
sfrb ADMUX=7;
sfrb ACSR=8;
sfrb UBRR0L=9;
sfrb UCSR0B=0xa;
sfrb UCSR0A=0xb;
sfrb UDR0=0xc;
sfrb SPCR=0xd;
sfrb SPSR=0xe;
sfrb SPDR=0xf;
sfrb PIND=0x10;
sfrb DDRD=0x11;
sfrb PORTD=0x12;
sfrb PINC=0x13;
sfrb DDRC=0x14;
sfrb PORTC=0x15;
sfrb PINB=0x16;
sfrb DDRB=0x17;
sfrb PORTB=0x18;
sfrb PINA=0x19;
sfrb DDRA=0x1a;
sfrb PORTA=0x1b;
sfrb EECR=0x1c;
sfrb EEDR=0x1d;
sfrb EEARL=0x1e;
sfrb EEARH=0x1f;
sfrw EEAR=0x1e;   // 16 bit access
sfrb SFIOR=0x20;
sfrb WDTCR=0x21;
sfrb OCDR=0x22;
sfrb OCR2=0x23;
sfrb TCNT2=0x24;
sfrb TCCR2=0x25;
sfrb ICR1L=0x26;
sfrb ICR1H=0x27;
sfrw ICR1=0x26;   // 16 bit access
sfrb OCR1BL=0x28;
sfrb OCR1BH=0x29;
sfrw OCR1B=0x28;  // 16 bit access
sfrb OCR1AL=0x2a;
sfrb OCR1AH=0x2b;
sfrw OCR1A=0x2a;  // 16 bit access
sfrb TCNT1L=0x2c;
sfrb TCNT1H=0x2d;
sfrw TCNT1=0x2c;  // 16 bit access
sfrb TCCR1B=0x2e;
sfrb TCCR1A=0x2f;
sfrb ASSR=0x30;
sfrb OCR0=0x31;
sfrb TCNT0=0x32;
sfrb TCCR0=0x33;
sfrb MCUCSR=0x34;
sfrb MCUCR=0x35;
sfrb TIFR=0x36;
sfrb TIMSK=0x37;
sfrb EIFR=0x38;
sfrb EIMSK=0x39;
sfrb EICRB=0x3a;
sfrb RAMPZ=0x3b;
sfrb XDIV=0x3c;
sfrb SPL=0x3d;
sfrb SPH=0x3e;
sfrb SREG=0x3f;
#pragma used-


// Interrupt vectors definitions


// CodeVisionAVR C Compiler
// (C) 1998-2003 Pavel Haiduc, HP InfoTech S.R.L.

// Prototypes for standard I/O functions


// CodeVisionAVR C Compiler
// (C) 1998-2002 Pavel Haiduc, HP InfoTech S.R.L.

// Variable length argument list macros



typedef char *va_list;





#pragma used+

char getchar(void);
void putchar(char c);
void puts(char *str);
void putsf(char flash *str);


char *gets(char *str,unsigned int len);

void printf(char flash *fmtstr,...);
void sprintf(char *str, char flash *fmtstr,...);
void vprintf (char flash * fmtstr, va_list argptr);
void vsprintf (char *str, char flash * fmtstr, va_list argptr);
signed char scanf(char flash *fmtstr,...);
signed char sscanf(char *str, char flash *fmtstr,...);




                                   

            


#pragma used-

#pragma library stdio.lib


// CodeVisionAVR C Compiler
// (C) 1998-2005 Pavel Haiduc, HP InfoTech S.R.L.

// Prototypes for string functions



#pragma used+

char *strcat(char *str1,char *str2);
char *strcatf(char *str1,char flash *str2);
char *strchr(char *str,char c);
signed char strcmp(char *str1,char *str2);
signed char strcmpf(char *str1,char flash *str2);
char *strcpy(char *dest,char *src);
char *strcpyf(char *dest,char flash *src);
unsigned char strcspn(char *str,char *set);
unsigned char strcspnf(char *str,char flash *set);
unsigned int strlenf(char flash *str);
char *strncat(char *str1,char *str2,unsigned char n);
char *strncatf(char *str1,char flash *str2,unsigned char n);
signed char strncmp(char *str1,char *str2,unsigned char n);
signed char strncmpf(char *str1,char flash *str2,unsigned char n);
char *strncpy(char *dest,char *src,unsigned char n);
char *strncpyf(char *dest,char flash *src,unsigned char n);
char *strpbrk(char *str,char *set);
char *strpbrkf(char *str,char flash *set);
signed char strpos(char *str,char c);
char *strrchr(char *str,char c);
char *strrpbrk(char *str,char *set);
char *strrpbrkf(char *str,char flash *set);
signed char strrpos(char *str,char c);
char *strstr(char *str1,char *str2);
char *strstrf(char *str1,char flash *str2);
unsigned char strspn(char *str,char *set);
unsigned char strspnf(char *str,char flash *set);
char *strtok(char *str1,char flash *str2);
 

unsigned int strlen(char *str);
void *memccpy(void *dest,void *src,char c,unsigned n);
void *memchr(void *buf,unsigned char c,unsigned n);
signed char memcmp(void *buf1,void *buf2,unsigned n);
signed char memcmpf(void *buf1,void flash *buf2,unsigned n);
void *memcpy(void *dest,void *src,unsigned n);
void *memcpyf(void *dest,void flash *src,unsigned n);
void *memmove(void *dest,void *src,unsigned n);
void *memset(void *buf,unsigned char c,unsigned n);

#pragma used-
#pragma library string.lib


/* CodeVisionAVR C Compiler
   Prototypes for standard library functions

   (C) 1998-2003 Pavel Haiduc, HP InfoTech S.R.L.
*/




#pragma used+

int atoi(char *str);
long int atol(char *str);
float atof(char *str);
void itoa(int n,char *str);
void ltoa(long int n,char *str);
void ftoa(float n,unsigned char decimals,char *str);
void ftoe(float n,unsigned char decimals,char *str);
void srand(int seed);
int rand(void);
void *malloc(unsigned int size);
void *calloc(unsigned int num, unsigned int size);
void *realloc(void *ptr, unsigned int size); 
void free(void *ptr);

#pragma used-
#pragma library stdlib.lib





typedef unsigned int UINT;
typedef unsigned char BYTE;
typedef unsigned long DWORD;
typedef long LONG;
typedef unsigned int WORD;
typedef unsigned char BOOL;
typedef unsigned char uchar;


//timer
typedef struct 
{
    unsigned char bUsed;
    DWORD ltimes;
}TIMERTICK;

//ip addr class
typedef struct
{
    BYTE classA;
    BYTE classB;
    BYTE classC;
    BYTE classD;
}IP_ADDR;

//modem status
typedef struct 
{
	unsigned char bModemReset;
	unsigned char bModemOn;
}MODEMSTATUS;

//serial port and protocol buffer status

typedef struct 
{
	BYTE buffer[80       ];
	UINT empty;
	UINT data;
    unsigned char overflow;
    unsigned char timeout;
//    UINT timer;
}SPSTATUS;



//echo on/off



///////////////////////////////////////////////////
// configuration
//#define DEBUG_MODE
//#define MONITOR_UART0
//#define MONITOR_G20_SP




extern bit system_initial_flag;

void workingloop();
void CPU_init(void);



unsigned char attention_at();
unsigned char attention_ate(unsigned char bDisplay);
unsigned char attention_atz();
unsigned char attention_cpin();
void attention_rcv_proc(BYTE c);
unsigned char attention_csq();
unsigned char attention_cregset();
unsigned char attention_cregchk();

unsigned char attention_cgregchk();
unsigned char attention_cgregset();
unsigned char attention_gprscvr();
unsigned char attention_mipcall_on();
unsigned char attention_mipcall(unsigned char bSwitch);
unsigned char attention_mipopen();
unsigned char attention_mipsend(BYTE * pBuf);
unsigned char attention_mippush(void);
//unsigned char attention_mippush(IP_ADDR *pAdd, UINT nPort);

void exch_mobilephone(unsigned char nLoop);
void unlicode_hex(BYTE * pBuf, unsigned char nLoop);
unsigned char attention_cmgs(unsigned char value,unsigned char alarmNo);

unsigned char attention_init();
unsigned char attention_dialproc();
unsigned char attention_udpproc();


void g20_mdm_init();
unsigned char g20_mdm_on();
unsigned char g20_mdm_off();
unsigned char g20_mdm_rest();
void g20_mdm_proc();






/*
#define G20_RTS PORTA.7
#define G20_CTS PINA.6
//#define G20_RXD PINE.0
//#define G20_TXD PORTE.1
#define G20_DTR PORTA.5
#define G20_DSR PINA.4
#define G20_DCD PINA.3
#define G20_RI PINA.2
#define G20_RESET PINB.5
#define G20_POWER PORTB.7
#define G20_IGN VCC
//#define G20_RF PING.3
//#define G20_GPRS PING.4
*/

BYTE Hex2Char(BYTE ch);
BYTE Char2Hex(BYTE ch);
void g20_sp_init();
unsigned char g20_sp_not_empty();
BYTE g20_sp_getchar();
void g20_sp_flush();
void g20_sp_init_buf();
void g20_sp_send(flash BYTE * pBuf);
void g20_sp_sendb(BYTE * pBuf);
unsigned char g20_sp_waitfor(flash BYTE * pExpect,
                    flash BYTE * pExpect1,
                    flash BYTE *pExcept1, 
					flash BYTE * pExcept2,
                    flash BYTE *pExcept3,
                    DWORD timeouts);
void g20_sp_proc();
void g20_sp_writebyte(BYTE c);
void g20_rcv_proc(BYTE c);





extern bit rtc_set_flag;

void v_Get1302(uchar ucCurtime[]);
void v_Set1302(uchar *pSecDa) ;
void v_BurstR1302R(uchar *pReDa);
void v_BurstW1302R(uchar *pReDa);
void v_BurstR1302T(uchar *pSecDa);
void v_BurstW1302T(uchar *pSecDa);
uchar uc_R1302(uchar ucAddr);
void v_W1302(uchar ucAddr, uchar ucDa);
uchar uc_RTOutputByte(void);
void v_RTInputByte(uchar ucDa);
void rtc_init();



extern SPSTATUS my_usart1_status;
extern unsigned char my_usart1_data[25];

void sp_init();
void usart1_init();
BYTE sp_getchar();
unsigned char sp_notempty();
void sp_flush();
void sp_init_buf();
void sp_send(BYTE * pBuf);
unsigned char sp_waitfor(flash BYTE * pExpect, flash BYTE *pExpect1, flash BYTE *pExcept1, 
					flash BYTE * pExcept2, flash BYTE *pExcept3, DWORD timeouts);
void sp_rcv_proc(BYTE data);
void sp_usart1_proc(BYTE data);
void sp_writebyte(BYTE c);
void sp_proc();
void usart1_proc();


extern UINT call_time;
//extern UINT free_time;

extern uchar CLK_MIN;
extern uchar CLK_SEC;
extern uchar CLK_HOUR;
extern uchar CLK_DAY;
extern uchar CLK_MONTH;
extern uchar CLK_YEAR;

extern unsigned char all_sending;
extern bit g20_reset;

void timer0_init();
void timer1_init();
void timer3_init();
void timer_init();
TIMERTICK * timer_settimer(DWORD ltimes);
unsigned char timer_checktimeout(TIMERTICK * ptimer);
void timer_delay(DWORD ltimes);
void timer_set_sp();
void timer_set_g20_sp();
void timer_set_usart1();
unsigned char timer_get_sp_timeout();
unsigned char timer_get_g20_sp_timeout();
unsigned char timer_get_usart1_timeout();



void udp_sp_proc();
void udp_sp_send(flash BYTE * pBuf);
void udp_sp_init_buf();
void udp_sp_flush();
BYTE udp_sp_getchar();
unsigned char udp_sp_not_empty();
void udp_sp_init();
void udp_rcv_proc(BYTE data);





extern eeprom unsigned char MobilePhone1[12];
extern eeprom unsigned char MobilePhone2[12];
extern eeprom unsigned char MobilePhone3[12];
extern eeprom unsigned int MY_ID;
extern unsigned int Protocol_pointer_last;
extern unsigned int Protocol_pointer_current;

extern bit bMobilePhone;
extern bit bAlarmValue;
extern bit bAlarmData;


void SetThreshold();
void ReadThreshold();
void SetMobile();
void SetClock();
void ReadHistoryData();
void ConfirmMobilePhone();
void ConfirmAlarmValue();
void ConfirmAlarmData();
void uploadMobile();
void uploadAlarmValue();
void uploadRealtimeData();
void uploadAlarmData(unsigned char value);


/* hex to bcd */
unsigned char hex2bcd(unsigned char hdata);
/* bcd to hex */
unsigned int bcd2hex(BYTE bdata);

void initial_protocol(void);
void ProtocolProc(void);
void SerialPortWrite(BYTE *pBuf, int nLength);








void cmgs_no(unsigned char value);
void myid_no(unsigned char value);
void print_no(unsigned char value);
void display_no(unsigned char value);
void myip_no(unsigned char value);




unsigned char bnumber[30];


unsigned char chEnd[4] = 
{
	0x1A, 0x1D, 0x1A, 0x1A
};

unsigned char attention_at()
{
    unsigned char bRet = 0;
    volatile UINT nLoop = 5;
    g20_sp_init_buf();
    while(nLoop -- > 0)
    {
	    #asm("wdr");
        g20_sp_send("AT\r");
        
		bRet = g20_sp_waitfor("OK", 0, "ERROR",0, 0, 2000);
		if(bRet)
			return 1;
    }
    return 0;    
}

unsigned char attention_atz()
{
    unsigned char bRet = 0;
    volatile UINT nLoop = 5;
    g20_sp_init_buf();
    while(nLoop -- > 0)
    {
        #asm("wdr");
        g20_sp_send("ATZ\r");
        bRet = g20_sp_waitfor("OK", 0, "ERROR", 0, 0, 2000);
        if(bRet)
			return 1;
    }
	return 0;
}

unsigned char attention_ate(unsigned char bDisplay)
{
    unsigned char bRet = 0;
    volatile UINT nLoop = 5;
    g20_sp_init_buf();   
    while(nLoop -- > 0)
    {
        #asm("wdr");
        if(bDisplay)
            g20_sp_send("ATE1\r");
        else
            g20_sp_send("ATE0\r");
        bRet = g20_sp_waitfor("OK",0, "ERROR", 0, 0, 2000);
        if(bRet)
            return 1;
    }
    return 0;    
}

unsigned char attention_cpin()
{
    unsigned char bRet = 0;
    volatile UINT nLoop = 5;
    g20_sp_init_buf();  
    while(nLoop -- > 0)
    {
        #asm("wdr");
        g20_sp_send("AT+CPIN?\r");
        bRet = g20_sp_waitfor("+CPIN: READY", "PIN: READY", "ERROR", 0, 0, 200);
        if(bRet)
        	return 1;
    }
	return 0;
}

unsigned char attention_csq()
{    
	unsigned char bRet = 0;
	volatile UINT nLoop = 5;
	volatile UINT nGetChar = 0;
	volatile BYTE chTemp = 0x00;
	volatile UINT nCSQ;

    nCSQ = 0;
    g20_sp_init_buf();
	while(nLoop -- > 0)
	{
        #asm("wdr");
		g20_sp_send("AT+CSQ?\r");
		bRet = g20_sp_waitfor("+CSQ:",0,"ERROR", 0, 0, 2000);
		if(bRet == 1)
		{
		    
			for(nGetChar = 0; nGetChar < 4; nGetChar ++)
			{
			    chTemp = 0x00;			 
				chTemp = g20_sp_getchar();
				if((chTemp >= (BYTE)0x30)&&(chTemp <= (BYTE)0x39))
				{
					//nCSQ = nCSQ + (UINT)(chTemp - 0x30)*(10^(3-nGetChar));
                    // (10^(3-nGetChar)    ~~~~~~~~~~~~~~~ ERROR: 10^0 = 10
                    switch(nGetChar)
                    {
                    case 1:
                        nCSQ = nCSQ +(UINT)(chTemp - 0x30)*100;
                        break;
                    case 2:
                        nCSQ = nCSQ + (UINT)(chTemp - 0x30)*10;
                        break;
                    case 3:
                        nCSQ = nCSQ + (UINT)(chTemp - 0x30);
                    }                  
				}
			}
//            memset(sztemp, 0x00, 10);
//            sprintf((unsigned char*)sztemp, "MY SEQ: %d\r\n", nCSQ);
//            sp_send(sztemp);
			return 1;
		}
	}	
    return 0;
}

/*unsigned char attention_cregset()
{
	unsigned char bRet = FALSE;
	volatile UINT nLoop = RETRY_TIMES;