s_iplot.m

基于Matlab的地震数据处理显示和测井数据显示于处理的小程序

function aux=s_iplot(seismic,varargin)
% Function plots seismic data in wiggle-trace form. 
% By default, positive deflections are filled black.
%
% Written by: E. R.: April 15, 2000
% Last updated: December 14, 2005: Bug fix in trace selection
%
%             aux=s_iplot(seismic,varargin)
% INPUT
% seismic     seismic structure
% varargin    one or more cell arrays; the first element of each cell 
%             array is a keyword, the other elements are parameters. 
%             Presently, keywords are:
%     'annotation'  2-element or 3-element cell array. Defines a header 
%             mnemonic whose values are used to annotate the horizontal axis. 
%             Default: {'annotation','trace_no'}
%     'aindex annotation index; used to annotate specific traces with the
%             value of the header selected via keyword annotation.
%             EXAMPLE {'aindex',5:10:1000}   every tenth trace annotated, 
%                                             starting with trace 5
%             Default: {'aindex',[]}          automatic annotation
%     'deflection' trace deflection in units of trace spacing. 
%             Default: ('deflection',1.25}
%     'direction'  2-element cell array defining plot direction. Possible
%             values are: left-to-right, 'l2r', and right-to-left, 'r2l'.  
%             Default: {'direction','l2r')
%     'figure_only' specifies if only a figure window should be created;
%             possible values: 'yes', 'no'. 
%             Default: {'figure_only','no'}
%     'figure'     Specifies if new figure should be created or if the seismic 
%             traces  should be plotted to an existing figure. Possible values
%             are 'new' and any other string. 
%             Default: {'figure','new'} 
%     'interpol'    2-element cell array which specifies how data should be 
%             interpolated in time. Possible values are 'linear', 'cubic',
%             and 'v5cubic'. 
%             'cubic'   - piecewise cubic Hermite interpolation
%             'v5cubic'  - the cubic interpolation from MATLAB 5, which does not
%                  extrapolate and uses 'spline' if X is not equally spaced.
%             Default: {'interpol','v5cubic'}
%     'orient' Plot orientation. Possible values are: 'portrait' and 'landscape'
%             Default: {'orient','landscape'} for more than 10 traces
%                      {'orient','portrait'} for fewer than 11 traces
%     'peak_fill'   2-elementcell array which specifies color of peak fill. Possible values are 
%             all permissible colors or the empty string. In the latter case peaks are not filled. 
%             Default: {'peak_fill','k'}
%     'pixels'      2-element cell array. Minimum number of interpolation points to use for display. 
%             The greater the number the smoother the display if 'interpol' is 'cubic'. 
%             Default: {'pixels',200}
%     'polarity'    2-element cell array. Possible values are 1 and -1;
%             Default: {'polarity',1}
%     'quality'     2-element cell array. Possible values are 'draft' and 'high'
%             'draft' quality (default) is faster and intended for screen and b/w hardcopies; 
%             'high' quality is for color copies (there is no difference between
%             'draft' and 'high' quality for screen displays and b/w copies).
%             Default: {'quality','draft'}
%     'scale'       2-element cell array which specifies if traces should be scaled individually.
%             Possible values are 'yes', 'no', or the actual scale. This may be a scalar or a
%             vector whose number of elements is equal to the number of traces.
%             separation. The scale actually used must be obtained by specifying the output
%             argument "aux".
%             Default: {'scale','yes'}
%     'spacing'     2-element cell array which specifies if traces should be   
%             equidistant ('equal') or nonuniformly ('nonequal') spaced; 
%             in the latter case the header mnemonic used for annotation defines 
%             the trace-to-trace separation.
%             Default: {'spacing','equal'}
%     'times'       2-element or 3-element cell array 
%             {'times',vector of first and last time to plot} or ('times',first,last}. 
%             Default: {'times',seismic.first,seismic.last} which is
%                      equivalent to {'times',[seismic.first,seismic.last]}
%     'title'       2-element cell array consisting of the keyword 'title' and a title string;
%             no title is plotted if the title string is empty.
%             Default: {'title',inputname(1)) where inputname(1) is the name of the seismic 
%                      input data set
%     'traces'      2-element or 3-element cell array. The second element can be an array of 
%             trace numbers or it can be a string. If it is a string it can be a header 
%             mnemonic or it can contain a logical expression involving header values to 
%             include. A "pseudo-header" 'trace_no' can also be used.
%             If the second element is a string containing a header mnemonic there must 
%             be a third element containing a vector of values. (see "s_select")
%             Default:  {'traces',[]} which is equivalent to 
%                       {'traces',1:ntr} where ntr denotes the number of traces in the 
%                              input data set (ntr = size(seismic.traces,2))
%     'tracking' track curor; possible values are 'yes' and 'no'
%             Default: {'tracking','yes'} if parameter 'figure' == 'new'
%             Default: {'tracking','no'} if parameter 'figure' == 'old'
%     'trough_fill' 2-element cell array which specifies color of trough fill. 
%             Possible values are all permissible colors or the empty string. 
%             In the latter case troughs are not filled. 
%             Default: {'trough_fill',''}
%     'wiggle'      2-element cell array which specifies color of wiggles. 
%             Possible values are all permissible colors or the empty string. 
%             In the latter case wiggles are not plotted. 
%             Default: {'wiggle','k'}
%
% OUTPUT
% aux        optional structure with scale factor(s) used (required if seismic
%            data are to be ploted with the same scaling in different plots)
%            'scale'   field with scale factor(s) used           
%            'figure_handle'  handle of the figure with the plot 
% EXAMPLE
%            seismic=s_data;
%            s_iplot(seismic,{'direction','r2l'},{'deflection',1})

global ABORTED

if ~istype(seismic,'seismic')
   if isnumeric(seismic)
      seismic=s_convert(seismic,1,1);
      seismic.units='Samples';
   else
      error('First input argument must be seismic dataset or a matrix.')
   end
end

aux=[];
ABORTED=logical(0);

run_presets_if_needed

ntr=size(seismic.traces,2);

%     Set default values
param.annotation='trace_no';
param.aindex=[];
param.deflection=1.25;
param.direction='l2r';
param.figure='new';
param.figure_only='no';
param.first=1;
param.inc=[];
param.interactive=1;
param.interpol='v5cubic';
param.orient=[];
param.peak_fill='k';
param.pixels=500;
param.polarity=1;
param.quality='draft';
param.scale='yes';
param.spacing='equal';
param.times=[];
param.title=seismic.name;
param.traces=[];
param.tracking=[];
param.trough_fill='none';
param.wiggle='k';
param.wiggle_width=0.5;

%       Decode and assign input arguments
param=assign_input(param,varargin,'s_iplot');

%       Create figure window (unless an existing figure is to be used)
if strcmpi(param.figure,'new')
   if isempty(param.tracking)
      param.tracking='yes';
   end
   if isempty(param.orient)
      if ntr > 10
         param.orient='landscape';
      else
         param.orient='portrait';
      end
   end
   if strcmpi(param.orient,'landscape')
      figure_handle=lfigure;
   else
      figure_handle=pfigure;
   end
   figure_export_menu(figure_handle); % Create menu button to export figure as emf/eps file
   pause(0)
   wseismic_scrollbar_menu(figure_handle,seismic,param.direction) % Create scrollbars
else
   figure_handle=gcf;
   if isempty(param.tracking)
      param.tracking='no';
   end

end

if nargout > 0
   aux.figure_handle=figure_handle;
end

s_wplot_no1(seismic,param)

%       Create structure "userdata" to save info that allows one to 
%       interactively modify the seismic plot
if param.interactive & strcmp(param.figure,'new')
   haxis=gca;	
   userdata=get(figure_handle,'UserData');
   userdata.seismic=seismic;
   userdata.param=param; 
   userdata.axis_handle=haxis;
   set(figure_handle,'UserData',userdata,'DoubleBuffer','on')   
   menu2edit_seismic(figure_handle)	% Set menu button for plot parameters
end
if nargout == 0
   clear aux
end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

function s_wplot_no1(seismic,param)

global ABORTED S4M

if isempty(S4M)
   presets
   S4M.script='';
   S4M.plot_label='';
end

history=S4M.history;  % Preserve value of global variable S4M.history

S4M.history=0;

if ~isempty(param.traces)
   if ~iscell(param.traces)
      seismic=s_select(seismic,{'traces',param.traces});
   else
      seismic=s_select(seismic,{'traces',param.traces{1},param.traces{2}});
   end
%   ntr=size(seismic.traces,2);
end

if ~isempty(param.times)
   if length(param.times) <= 1
      seismic=s_select(seismic,{'times',param.times});
   elseif iscell(param.times)
      seismic=s_select(seismic,{'times',param.times{1},param.times{2}});
   else
      seismic=s_select(seismic,{'times',param.times(1),param.times(2)});
   end
%  nsamp=size(seismic.traces,1);
end

S4M.history=history;

annotation=s_gh(seismic,param.annotation);
if length(annotation) == 1
   uniform=logical(1);
   annotlog=logical(0);
else
   ddd=diff(annotation);
   annotlog=(max(ddd)==min(ddd)) & ddd(1) ~= 0 & isempty(param.aindex);
   if annotlog
      uniform=logical(0);
   else
      if strcmp(param.spacing,'equal')
         uniform=logical(1);        % Uniform trace-to-trace distance
      else
         uniform=logical(0);
      end
   end
end

[nsamp,ntr]=size(seismic.traces);
if nsamp*ntr == 0
   disp([' Alert from "s_iplot": Data set "',seismic.name,'" has no traces to plot'])
   return
end

%       Set indices of trace headers for annotation
if isempty(param.aindex)
   indices=1:max([round(ntr/7),1]):ntr;
else
   indices=param.aindex(param.aindex > 0  &  param.aindex <= ntr);
end

if nsamp <= 1
   ABORTED=logical(1);
   if param.interactive
      msgdlg(' Only one sample per trace;  seismic data set is not plotted.')
   else
      disp([' Only one sample per trace;  s_iplot did not plot data set "',seismic.name,'"'])
   end
   return
end

%     Change polarity if requested
if param.polarity < 0
   seismic.traces=-seismic.traces;
end

%     Interpolate data if necessary
if (strcmpi(param.interpol,'v5cubic') | strcmpi(param.interpol,'cubic')) &  nsamp < param.pixels
   if isfield(seismic,'null') & isnan(seismic.null)
      for ii=1:ntr           % Replace last NaN at the top and first NaN at the bottom by zero
         idx=find(~isnan(seismic.traces(:,ii)));
         if ~isempty(idx)
            if idx(1) > 1
               seismic.traces(idx(1)-1,ii)=0;
            end
            if idx(end) < nsamp
               seismic.traces(idx(end)+1,ii)=0;
            end
         end
      end
   end
   npix=round(param.pixels/(nsamp-1))*(nsamp-1);
   dti=(seismic.last-seismic.first)/npix;
   times=(seismic.first:dti:seismic.last)';
   
   if isfield(seismic,'null')  &  S4M.matlab_version >= 7 % Turn off warnings caused by NaN's in seismic traces
      warning('off','MATLAB:interp1:NaNinY')
      yi=interp1(seismic.first:seismic.step:seismic.last,seismic.traces,times,param.interpol);
      warning('on','MATLAB:interp1:NaNinY')
   else
      yi=interp1(seismic.first:seismic.step:seismic.last,seismic.traces,times,param.interpol);