eeprom04.asm

合泰MCU写的电话机源程序

;----------------------------------------------------------------
;      Author      : QinPinJian 
;      Native place: ShangLin county GuangXi Province China
;      Create date : April/12/2K2
;      Function    : Atmel 24LC04 EEPROM Write read routine
;----------------------------------------------------------------
;			?//--- parameter ---//? 
;/////
;/////    MP0 --> indirect address of the data will be writed
;/////    R_EE_Byte_count --> need write data byte quantity
;/////    R_WR_EE_address --> the eeprom operating address 
;/////    R_EE_bank --------> operating  eeprom bank 
;/////
;--------------- write byte data to eeprom routine ------------------
F_Write_EE_Byte:
                call    setportoutput
			    call    starteeprom
				mov		a, R_EE_bank       ;0a0h              ;0a0h
				mov		R_write_EE_data,a
                call    sand_data       ;device address

                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
				jmp		F_Write_EE_Byte

                call    setportoutput

				mov		a,R_WR_EE_address
				mov		R_write_EE_data,a
                call    sand_data       ;word address

                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
;                ret
				jmp		F_Write_EE_Byte
    			call    setportoutput


;;L_write_ee_loop:
				nop
				mov		a, [00h]                  ;the data which be saved in  
				mov		R_write_ee_data,a        ;eeprom indirect by MP0

    			call    sand_data               ;write data
                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
                ret
                call    setportoutput
                call    stopeeprom

				inc		mp0
				sdz		R_EE_Byte_count
				jmp		L_write_ee_loop
                ret
L_write_ee_loop:
	call	nop4t
	call	nop4t
	call	nop4t
	call	nop4t
;	mov		a,2
;	mov		R_Time_count_L,a         ;wait 2ms
;	mov		a,0
;	mov		R_Time_count_H,a

;	call	F_wait_time
	inc		R_WR_EE_address
	jmp     F_Write_EE_Byte	
				
;----------------------------------------------------------------
;			?//--- parameter ---//? 
;/////    
;/////    MP0 --> indirect address of the data will be saved in 
;/////    R_EE_Byte_count --> need read data byte quantity
;/////    R_WR_EE_address --> the eeprom operating address 
;/////    R_EE_bank --------> operating  eeprom bank 
;/////
;--------------- read byte data from eeprom routine ------------------
F_Read_EE_Byte:
                call    setportoutput

			    call    starteeprom
				mov		a,R_EE_bank     ;0a0h
				mov		R_write_EE_data,a
                call    sand_data       ;device address

                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
                ;ret
				jmp		F_Read_EE_Byte

                call    setportoutput

				mov		a,R_wR_EE_address  ;00h
				mov		R_write_EE_data,a
                call    sand_data       ;word address

                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
;                ret
				jmp		F_Read_EE_Byte

                call    setportoutput

                call    starteeprom

				mov		a,R_EE_bank      ;0a1h
				set		acc.0
				mov		R_write_EE_data,a
                call    sand_data       ;device address

                call    setportinput
                call    acknowledge     ;ack
                sz      sda             ;ack
;                ret
				jmp		F_Read_EE_Byte

;L_read_ee_loop:

                call    recieve_data    ;recieve data from eeprom

                call    setportoutput
                call    stopeeprom
				
				inc		mp0
				sdz		R_EE_Byte_count
				jmp		L_read_ee_loop
				ret
L_read_ee_loop:
	call	nop4t
	call	nop4t
	call	nop4t
	call	nop4t
;	mov		a,2
;	mov		R_Time_count_L,a         ;wait 2ms
;	mov		a,0
;	mov		R_Time_count_H,a
;
;	call	F_wait_time
	inc		R_WR_EE_address
	jmp     F_Read_EE_Byte	
				
				;/// last one not need ack !!	


                ;--------------------start EE-prom---------------------------
starteeprom:  
                clr     scl
                set     sda
                call    nop4t
                set     scl
                call    nop4t
                clr     sda
                call    nop4t
                ret

                ;--------------------stop EE-prom----------------------------
stopeeprom:     

                clr     sda
                clr     scl
                call    nop4t
                set     scl
                call    nop4t
                set     sda
                call    nop4t
                ret


                ;------------------acknowledge from EEprom----------------
acknowledge:
			    call    nop4t
				set		scl
                call    nop4t
                call    nop4t
;;				clr		scl
                ret
                ;-----------------sand address or data-----------------------
sand_data:  

		mov		a,8
		mov		R_WR_bit_count,a
		mov		a,R_write_EE_data 
    	clr		scl
        call    nop4t
WriteBit:
		rLc		acc      ;left rotate
		snz		c
		jmp		ClrDI
		set		SDA				;Output "1"
		jmp		RisingEdge
ClrDI:		
		clr		SDA				;Output "0"
RisingEdge:
        call    nop4t
        set     scl
        call    nop4t
        call    nop4t
        clr     scl
        call    nop4t
		sdz		R_WR_bit_count
		jmp		WriteBit
;		clr		SDA				;Output "0"

		;/// start wait EEPROM ack ////
		ret
                ;-----------------recieve data--------------------------
recieve_data:
    	clr 	scl
        call    nop4t
        call    nop4t

		mov		a,8
		mov		R_WR_bit_count,a
ReadBit:
;    	clr 	scl
;        call    nop4t
;        call    nop4t

        set     scl
        call    nop4t
        call    nop4t

		set		c
		snz		SDA                 ;test pb.1 pin 				
		clr		c
		RLC		acc

        clr     scl
        call    nop4t
        call    nop4t
		sdz		R_WR_bit_count
		jmp		ReadBit
		mov		[00h],a            ;save data in memory
		ret				
;;------------------------------------------------------
;recieve_data:   bits    emb
;               smb     15
;               bitr    scl
;                call    nop4t
;                ld      l       #7h
;loop_rbsc0:  
;			    ldb     c       sda
;                ldb     bsc0.@l c
;                call    nop4t
;                bits    scl
;                call    nop4t
;                bitr    scl
;                call    nop4t
;                decs    l
;                jps     loop_rbsc0
;                ld      ea      bsc0
;                ret
;

nop4t:
			nop
			nop
			nop
			nop
			nop
			ret

        ;------------------set port pb.1/p3.1 input---------------
setportinput: 
				set		pbc.1
				nop	
				nop
				ret		
       ;------------------set port pb.1/p3.1 output---------------
setportoutput:
				clr		pbc.1
;				clr		pbc.0
				nop	
				nop
				ret