opennetcf.net.xml

windows mobile 5 下的渐变Button 按钮.

            <summary>
            EAP flags
            </summary>
        </member>
        <member name="P:OpenNETCF.Net.EAPParameters.EapType">
            <summary>
            EAP type
            </summary>
        </member>
        <member name="P:OpenNETCF.Net.EAPParameters.AuthDataLen">
            <summary>
            Length of EAP provider-specific authentication data
            </summary>
        </member>
        <member name="P:OpenNETCF.Net.EAPParameters.AuthData">
            <summary>
            The actual provider-specific authentication data
            </summary>
        </member>
        <member name="P:OpenNETCF.Net.EAPParameters.Data">
            <summary>
            Return ***copy*** of data in the structure.
            </summary>
        </member>
        <member name="T:OpenNETCF.Net.DeviceStatusMonitor">
            <summary>
            Class for receiving device notifications of all sorts (storage card
            insertions/removals, etc.)  When a change is detected, an event is 
            fired to all interested parties.  The parameters of the event 
            indicate the GUID of the device interface that changed, whether the
            device is now connected or disconnected from the system, and the
            name of the device (COM1:, for example), which changed.
            </summary>
        </member>
        <member name="M:OpenNETCF.Net.DeviceStatusMonitor.#ctor(System.Guid,System.Boolean)">
            <summary>
            Constructor for DeviceStatusMonitor.  Specifies
            the class of notifications desired and whether
            notifications should be fired for already-attached
            devices.
            </summary>
            <param name="devclass">
            GUID of device class to monitor (or Guid.Empty to 
            monitor *all* device notifications).
            </param>
            <param name="notifyAlreadyConnectedDevices">
            Set to true to receive notifiations for devices
            which were attached before we started monitoring;
            set to false to see new events only.
            </param>
        </member>
        <member name="M:OpenNETCF.Net.DeviceStatusMonitor.Finalize">
            <summary>
            Destructor stops status monitoring.
            </summary>
        </member>
        <member name="M:OpenNETCF.Net.DeviceStatusMonitor.StopStatusMonitoring">
            <summary>
            Stops the worker thread which monitors for changes of status
            of the adapter.  This must be done, if monitoring has been
            started, before the object is destroyed.
            </summary>
        </member>
        <member name="M:OpenNETCF.Net.DeviceStatusMonitor.StartStatusMonitoring">
            <summary>
            Initiates a worker thread to listen for reports of device
            changes.  Listeners can register for notification of these 
            changes, which the thread will send.
            </summary>
        </member>
        <member name="M:OpenNETCF.Net.DeviceStatusMonitor.OnDeviceNotification(OpenNETCF.Net.DeviceNotificationArgs)">
            <summary>
            Raises the DeviceNotification event.
            </summary>
            <param name="e">
            An EventArgs that contains the event data.
            </param>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.BLOCK_DRIVER_GUID">
            <summary>
            Fired when the block driver for a Storage Manager
            device is loaded.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.STORE_MOUNT_GUID">
            <summary>
            Fired when the store, managed by the Storage
            Manager is ready.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.FATFS_MOUNT_GUID">
            <summary>
            Fired when a FAT filesystem is loaded for a device.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.CDFS_MOUNT_GUID">
            <summary>
            Fired when a CDFS filesystem is loaded.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.UDFS_MOUNT_GUID">
            <summary>
            Fired when a UDFS filesystem is loaded.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceStatusMonitor.CDDA_MOUNT_GUID">
            <summary>
            Fired when a CDDA filesystem is loaded.
            </summary>
        </member>
        <member name="E:OpenNETCF.Net.DeviceStatusMonitor.DeviceNotification">
            <summary>
            Event fired when some aspect of the device's connected status
            has changed.
            </summary>
        </member>
        <member name="P:OpenNETCF.Net.DeviceStatusMonitor.Active">
            <summary>
            The Active property is true when the status is
            being monitored.  If status monitoring is not
            occurring, Active is false.
            </summary>
        </member>
        <member name="T:OpenNETCF.Net.DeviceNotificationEventHandler">
            <summary>
            
            </summary>
            <param name="sender"></param>
            <param name="e"></param>
        </member>
        <member name="T:OpenNETCF.Net.DeviceNotificationArgs">
            <summary>
            DeviceNotificationArgs passed to interested parties
            when a device notification is fired.  Contains the
            device class GUID, a flag indicating whether the
            device is attached or detached, and the device name.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceNotificationArgs.DeviceInterfaceGUID">
            <summary>
            GUID of the interface/type/class of the device
            being attached or detached.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceNotificationArgs.DeviceAttached">
            <summary>
            True if, after the latest event, the device is
            connected; false, otherwise.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.DeviceNotificationArgs.DeviceName">
            <summary>
            The device name being attached/detached.  Might
            be a stream driver name like COM1:, or something
            more descriptive like Power Manager, depending
            on the GUID.
            </summary>
        </member>
        <member name="M:OpenNETCF.Net.DeviceNotificationArgs.#ctor(System.Guid,System.Boolean,System.String)">
            <summary>
            Constructor for notification arguments.
            </summary>
            <param name="g">Device class GUID</param>
            <param name="att">Device attached, true or false</param>
            <param name="nam">Device name</param>
        </member>
        <member name="T:OpenNETCF.Net.NetworkType">
            <summary>
            Enumeration returned in the NetworkTypeInUse property.
            Indicates the general type of radio network in use.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.NetworkType.FH">
            <summary>
            Indicates the physical layer of the frequency hopping spread-spectrum radio
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.NetworkType.DS">
            <summary>
            Indicates the physical layer of the direct sequencing spread-spectrum radio
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.NetworkType.OFDM5">
            <summary>
            Indicates the physical layer for 5-GHz Orthagonal Frequency Division Multiplexing radios
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.NetworkType.OFDM24">
            <summary>
            Indicates the physical layer for 24-GHz Orthagonal Frequency Division Multiplexing radios
            </summary>
        </member>
        <member name="T:OpenNETCF.Net.InfrastructureMode">
            <summary>
            Define the general network infrastructure mode in
            which the selected network is presently operating.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.InfrastructureMode.AdHoc">
            <summary>
            Specifies the independent basic service set (IBSS) mode. This mode is also known as ad hoc mode
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.InfrastructureMode.Infrastructure">
            <summary>
            Specifies the infrastructure mode.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.InfrastructureMode.AutoUnknown">
            <summary>
            The infrastructure mode is either set to automatic or cannot be determined.
            </summary>
        </member>
        <member name="T:OpenNETCF.Net.AuthenticationMode">
            <summary>
            Define authentication types for an adapter.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeOpen">
            <summary>
            Specifies IEEE 802.11 Open System authentication mode. In this mode, there are no checks performed during the 802.11 authentication
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeShared">
            <summary>
            Specifies IEEE 802.11 Shared Key authentication mode. This mode requires the use of a pre-shared Wired Equivalent Privacy (WEP) key for the 802.11 authentication
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeAutoSwitch">
            <summary>
            Specifies auto-switch mode. When using auto-switch mode, the device tries IEEE 802.11 Shared Key authentication mode first. If Shared Key authentication fails, the device attempts to use IEEE 802.11 Open System authentication mode.
            <remarks><b>Note</b> The use of this setting is not recommended</remarks> 
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeWPA">
            <summary>
            Specifies WPA version 1 security for infrastructure mode. Authentication is performed between the supplicant, authenticator, and authentication server over IEEE 802.1X. Encryption keys are dynamic and are derived through the authentication process
            While in this authentication mode, the device will only associate with an access point whose beacon or probe responses contain the authentication suite of type 1 (802.1X) within the WPA information element (IE).
            This authentication mode is only valid for infrastructure network modes. The driver must return NDIS_STATUS_NOT_ACCEPTED if its network mode is set to ad hoc.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeWPAPSK">
            <summary>
            Specifies WPA version 1 security for infrastructure mode. Authentication is made between the supplicant and authenticator over IEEE 802.1X. Encryption keys are dynamic and are derived through a pre-shared key used on both the supplicant and authenticator.
            While in this authentication mode, the device will only associate with an access point whose beacon or probe responses contain the authentication suite of type 2 (pre-shared key) within the WPA information element (IE).
            This authentication mode is only valid for infrastructure network modes. The driver must return NDIS_STATUS_NOT_ACCEPTED if its network mode is set to ad hoc.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeWPANone">
            <summary>
            Specifies WPA version 1 security for ad hoc mode. This setting specifies the use of a pre-shared key without IEEE 802.1X authentication. Encryption keys are static and are derived through the pre-shared key.
            This authentication mode is only valid for ad hoc network modes. The driver must return NDIS_STATUS_NOT_ACCEPTED if its network mode is set to infrastructure.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.AuthenticationMode.Ndis802_11AuthModeMax">
            <summary>
            Upper bound of Modes - not a real mode
            </summary>
        </member>
        <member name="T:OpenNETCF.Net.WEPStatus">
            <summary>
            Define WEP authentication state for the adapter.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11WEPEnabled">
            <summary>
            WEP encryption enabled
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11Encryption1Enabled">
            <summary>
            WEP encryption enabled
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11WEPDisabled">
            <summary>
            No WEP encryption
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11EncryptionDisabled">
            <summary>
            No WEP encryption
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11WEPKeyAbsent">
            <summary>
            WEP key is missing
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11Encryption1KeyAbsent">
            <summary>
            WEP, TKIP and AES are disabled. A transmit key is not available.
            </summary>
        </member>
        <member name="F:OpenNETCF.Net.WEPStatus.Ndis802_11WEPNotSupported">
            <summary>
            WEP is not supported
            </summary>
        </member>
        <member name="F:Op