count_10.fit

本文件包是在MAX+plus II 软件环境下实现计数器的逻辑功能

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/04/2007 23:30:53      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "count_10"
BEGIN

    DEVICE = "EPF10K10TC144-3";

    "CLK"                          : INPUT_PIN  = 55     ;
    "CLR"                          : INPUT_PIN  = 54     ;
    "EN"                           : INPUT_PIN  = 56     ;
    "co"                           : OUTPUT_PIN = 13     ;
    "L0"                           : OUTPUT_PIN = 97     ;
    "L1"                           : OUTPUT_PIN = 7      ;
    "L2"                           : OUTPUT_PIN = 101    ;
    "L3"                           : OUTPUT_PIN = 102    ;
    "L4"                           : OUTPUT_PIN = 99     ;
    "L5"                           : OUTPUT_PIN = 95     ;
    "L6"                           : OUTPUT_PIN = 100    ;
    "|count_48:4|7448:3|:66"       : LOCATION   = LC7_A4 ;  -- |count_48:4|7448:3|OF
    "|count_48:4|7448:3|:67"       : LOCATION   = LC4_A4 ;  -- |count_48:4|7448:3|OD
    "|count_48:4|7448:3|:68"       : LOCATION   = LC1_A5 ;  -- |count_48:4|7448:3|OB
    "|count_48:4|7448:3|:69"       : LOCATION   = LC6_A5 ;  -- |count_48:4|7448:3|OA
    "|count_48:4|7448:3|:70"       : LOCATION   = LC1_A4 ;  -- |count_48:4|7448:3|OC
    "|count_48:4|7448:3|:71"       : LOCATION   = LC3_A4 ;  -- |count_48:4|7448:3|OE
    "|count_48:4|7448:3|:72"       : LOCATION   = LC2_A4 ;  -- |count_48:4|7448:3|OG
    "|count_160:3|74160:3|:6"      : LOCATION   = LC2_A5 ;  -- |count_160:3|74160:3|QA
    "|count_160:3|74160:3|:7"      : LOCATION   = LC5_A5 ;  -- |count_160:3|74160:3|QB
    "|count_160:3|74160:3|:8"      : LOCATION   = LC4_A5 ;  -- |count_160:3|74160:3|QC
    "|count_160:3|74160:3|:9"      : LOCATION   = LC3_A5 ;  -- |count_160:3|74160:3|QD
    "|count_160:3|74160:3|:45"     : LOCATION   = LC7_A5 ;  -- |count_160:3|74160:3|RCO
    "|count_160:3|74160:3|:46"     : LOCATION   = LC8_A5 ;

END;

INTERNAL_INFO "count_10"
BEGIN
	DEVICE = EPF10K10TC144-3;
    OD5P55  : LORAX = "1:FB5->LC2_A5,->LC5_A5,->LC4_A5,->LC3_A5|";
    OD2P54  : LORAX = "1:FB2->LC2_A5,->LC5_A5,->LC4_A5,->LC3_A5|";
    LC7_A4  : LORAX = "1:MSW7R0C2,G52R0->OH15R0P95|";
    LC4_A4  : LORAX = "1:MSW0R0C2,HHL21R0->OH8R0P102|";
    LC1_A5  : LORAX = "1:MSW0R0C4,G41R0->OH0R0P7|";
    LC6_A5  : LORAX = "1:MSW5R0C4,HHL42R0->OH13R0P97|";
    LC1_A4  : LORAX = "1:MSW1R0C2,HHL2R0->OH9R0P101|";
    LC3_A4  : LORAX = "1:MSW3R0C2,HHL6R0->OH11R0P99|";
    LC2_A4  : LORAX = "1:MSW2R0C2,HHL1R0->OH10R0P100|";
    LC2_A5  : LORAX = "1:MSW1R0C4,HHL5R0,PA17R0C3->LC7_A4,->LC4_A4,->LC1_A4,->LC3_A4,->LC2_A4|";
    LC5_A5  : LORAX = "1:MSW4R0C4,HHL44R0,PA5R0C3->LC7_A4,->LC4_A4,->LC1_A4,->LC3_A4,->LC2_A4|";
    LC4_A5  : LORAX = "1:MSW3R0C4,HHL7R0,PA15R0C3->LC7_A4,->LC4_A4,->LC1_A4,->LC3_A4,->LC2_A4|";
    LC3_A5  : LORAX = "1:MSW2R0C4,HHL0R0,PA1R0C3->LC7_A4,->LC1_A4,->LC2_A4|";
    LC7_A5  : LORAX = "1:MSW6R0C4,G76R0->OH6R0P13|";
    OD3P56  : LORAX = "1:FB3|2:FH3R0,PA5R0C4->LC2_A5,->LC5_A5,->LC4_A5,->LC3_A5,->LC7_A5,->LC8_A5||";
	LC7_A4  : LORAX2 = "LC5_A5, LC3_A5, LC2_A5, LC4_A5";
	LC4_A4  : LORAX2 = "X, LC5_A5, LC2_A5, LC4_A5";
	LC1_A5  : LORAX2 = "LC5_A5, LC3_A5, LC2_A5, LC4_A5";
	LC6_A5  : LORAX2 = "LC3_A5, LC5_A5, LC2_A5, LC4_A5";
	LC1_A4  : LORAX2 = "LC5_A5, LC3_A5, LC2_A5, LC4_A5";
	LC3_A4  : LORAX2 = "X, LC5_A5, LC2_A5, LC4_A5";
	LC2_A4  : LORAX2 = "LC5_A5, LC3_A5, LC2_A5, LC4_A5";
	LC2_A5  : LORAX2 = "X, X, OD3P56, LC2_A5";
	LC5_A5  : LORAX2 = "OD3P56, LC5_A5, LC3_A5, LC2_A5";
	LC4_A5  : LORAX2 = "OD3P56, LC5_A5, LC2_A5, LC4_A5";
	LC3_A5  : LORAX2 = "OD3P56, LC8_A5, LC3_A5, LC2_A5";
	LC7_A5  : LORAX2 = "X, OD3P56, LC3_A5, LC2_A5";
	LC8_A5  : LORAX2 = "OD3P56, LC5_A5, LC2_A5, LC4_A5";
END;