configure

libflash -- This the Version 0.4.10 of the Flash Library for Linux

      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1257: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1268 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1299: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1304: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1313: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1332: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1375: checking for ld used by GCC" >&5
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1399: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1402: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$ac_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1437: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6


echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1453: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi

NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1489: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"


# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 1538 "configure"' > conftest.$ac_ext
  if { (eval echo configure:1539: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1560: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1565 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:1572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac


# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache


# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \