wsn_coordinator.c

在jennic平台上的包括路由器和协调器的程序。基于ZIGBEE协议。

            (void)bBosCreateTimer(vToggleLed, &u8Msg, 0, (APP_TICK_PERIOD_ms / 10), &u8TimerId);
        }
    }
}

/****************************************************************************
 *
 * NAME: JZA_vPeripheralEvent
 *
 * DESCRIPTION:
 * Called when a hardware event causes an interrupt. This function is called
 * from within the interrupt context so should be brief. In this case, the
 * information is placed on a simple FIFO queue to be processed later.
 *
 * PARAMETERS: Name          RW  Usage
 *             u32Device     R   Peripheral generating interrupt
 *             u32ItemBitmap R   Bitmap of interrupt sources within peripheral
 *
 ****************************************************************************/
PUBLIC void JZA_vPeripheralEvent(uint32 u32Device, uint32 u32ItemBitmap)
{
}

/****************************************************************************
 *
 * NAME: JZA_vAppDefineTasks
 *
 * DESCRIPTION:
 * Called by Zigbee stack during initialisation to allow the application to
 * initialise any tasks that it requires. This application requires none.
 *
 * RETURNS:
 * void
 *
 ****************************************************************************/
PUBLIC void JZA_vAppDefineTasks(void)
{
}

/****************************************************************************
 *
 * NAME: JZA_boAppStart
 *
 * DESCRIPTION:
 * Called by Zigbee stack during initialisation. Sets up the profile
 * information and starts the networking activity
 *
 * RETURNS:
 * TRUE
 *
 ****************************************************************************/
PUBLIC bool_t JZA_boAppStart(void)
{
    uint8 u8InputClusterCnt      = 1;
    uint8 au8InputClusterList[]  = {WSN_CID_SENSOR_READINGS};
    uint8 u8OutputClusterCnt     = 0;
    uint8 au8OutputClusterList[] = {};

    (void)afmeAddSimpleDesc(WSN_DATA_SINK_ENDPOINT,
                            WSN_PROFILE_ID,
                            0x0000,
                            0x00,
                            0x00,
                            u8InputClusterCnt,
                            au8InputClusterList,
                            u8OutputClusterCnt,
                            au8OutputClusterList);

    JZS_vStartStack();

    return TRUE;
}

/****************************************************************************
 *
 * NAME: JZA_eAfKvpObject
 *
 * DESCRIPTION:
 * Called when a KVP transaction has been received with a matching endpoint.
 *
 * PARAMETERS:      Name           RW  Usage
 *                  afSrcAddr      R   Address of sender device
 *                  u8DstEndpoint  R   Endpoint at receiver
 *                  pu8ClusterId   R   Pointer to cluster ID
 *                  eCommandTypeId R   KVP command type
 *                  u16AttributeId R   KVP attribute ID
 *                  pu8AfduLength  R   Pointer to length of data
 *                  pu8Afdu        R   Data array
 *
 * RETURNS:
 * AF_ERROR_CODE
 *
 ****************************************************************************/
PUBLIC AF_ERROR_CODE JZA_eAfKvpObject(AF_ADDRTYPE         afSrcAddr,
                                      uint8               u8LQI,
                                      uint8               u8DstEndpoint,
                                      uint8               u8SequenceNum,
                                      uint8              *pu8ClusterId,
                                      AF_COMMAND_TYPE_ID  eCommandTypeId,
                                      uint16              u16AttributeId,
                                      uint8              *pu8AfduLength,
                                      uint8              *pu8Afdu)
{
	return KVP_SUCCESS;
}

/****************************************************************************
 *
 * NAME: JZA_vAfKvpResponse
 *
 * DESCRIPTION:
 * Called after a KVP transaction with acknowledgement request, when the
 * acknowledgement arrives. In this application no action is taken as no
 * KVP transaction acknowledgements are expected.
 *
 * PARAMETERS:      Name                   RW  Usage
 *                  srcAddressMod          R   Address of sender device
 *                  transactionSequenceNum R   KVP transaction number
 *                  commandTypeIdentifier  R   KVP command type
 *                  dstEndPoint            R   Endpoint at receiver
 *                  clusterID              R   Cluster ID
 *                  attributeIdentifier    R   KVP attribute ID
 *                  errorCode              R   Result code
 *                  afduLength             R   Length of payload data
 *                  pAfdu                  R   Payload data array
 *
 ****************************************************************************/
PUBLIC void JZA_vAfKvpResponse(AF_ADDRTYPE         srcAddressMod,
                               uint8               u8LQI,
                               uint8               transactionSequenceNum,
                               AF_COMMAND_TYPE_ID  commandTypeIdentifier,
                               uint8               dstEndPoint,
                               uint8               clusterID,
                               uint16              attributeIdentifier,
                               uint8               errorCode,
                               uint8               afduLength,
                               uint8              *pAfdu )
{
}

/****************************************************************************
 *
 * NAME: JZA_pu8AfMsgObject
 *
 * DESCRIPTION:
 * Called when a MSG transaction has been received with a matching endpoint.
 *
 * PARAMETERS:      Name           RW  Usage
 *                  afSrcAddr      R   Address of sender device
 *                  dstEndPoint    R   Endpoint at receiver
 *                  clusterID      R   Pointer to cluster ID
 *                  afduLength     R   Pointer to length of data
 *                  pAfdu          R   Data array
 *
 * RETURNS:
 * NULL
 *
 ****************************************************************************/
PUBLIC uint8 JZA_u8AfMsgObject(AF_ADDRTYPE sAfSrcAddr,
                               uint8       u8ClusterID,
                               uint8       u8DstEndPoint,
                               uint8       u8LQI,
                               uint8      *pau8AfduInd,
                               uint8      *pu8ClusterIDRsp,
                               uint8      *pau8AfduRsp)
{
	uint16 u16BattVoltage;
	uint16 u16Temperature;
	uint16 u16Humidity;

    if ((sAfSrcAddr.hAddrMode == DEV_16BIT_ADDR) &&
        (u8DstEndPoint == WSN_DATA_SINK_ENDPOINT))
    {
        if(u8ClusterID == WSN_CID_SENSOR_READINGS)
        {
            u16BattVoltage  = *(pau8AfduInd + 1);
            u16BattVoltage  = u16BattVoltage << 8;
            u16BattVoltage |= *pau8AfduInd;

            u16Temperature  = *(pau8AfduInd + 3);
            u16Temperature  = u16Temperature << 8;
            u16Temperature |= *(pau8AfduInd + 2);

            u16Humidity  = *(pau8AfduInd + 5);
            u16Humidity  = u16Humidity << 8;
            u16Humidity |= *(pau8AfduInd + 4);

            vTxSerialDataFrame(sAfSrcAddr.u16Address,
                               u16Humidity,
                               u16Temperature,
                               u16BattVoltage);
        }
    }
    return 0;
}

/****************************************************************************
 *
 * NAME: JZA_vZdpResponse
 *
 * DESCRIPTION:
 * Called when a ZDP response frame has been received. In this application no
 * action is taken as no ZDP responses are anticipated.
 *
 * PARAMETERS:      Name           RW  Usage
 *                  u8Type         R   ZDP response type
 *                  pu8Payload     R   Payload buffer
 *                  u8PayloadLen   R   Length of payload
 *
 ****************************************************************************/
PUBLIC void JZA_vZdpResponse(uint8  u8Type,
                             uint8  u8LQI,
                             uint8 *pu8Payload,
                             uint8  u8PayloadLen)
{
}

/****************************************************************************
 *
 * NAME: JZA_vStackEvent
 *
 * DESCRIPTION:
 * Called by Zigbee stack to pass an event up to the application.
 *
 * RETURNS:
 * TRUE
 *
 ****************************************************************************/
PUBLIC void JZA_vStackEvent(teJZS_EventIdentifier eEventId,
                            tuJZS_StackEvent *puStackEvent)
{
    if (eEventId == JZS_EVENT_NWK_STARTED)
    {
        bNwkStarted = TRUE;
    }
}

/****************************************************************************/
/***        END OF FILE                                                   ***/
/****************************************************************************/