project.prm

采用MC13213做的在SMAC协议基础上的发送程序,可作为点对点实验中的END DEVICE.

/* This is a linker parameter file for the GB60 */
NAMES END /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your own files too. */

SECTIONS /* here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */
  Z_RAM  = READ_WRITE 0x0080 TO 0x00FF; 
  RAM    = READ_WRITE 0x0100 TO 0x107F;
  NVRAM	= NO_INIT	 0x1400 TO 0x1800;	/* This keep out region protects 802.15.4 MAC NVRAM AREA */
  ROM    = READ_ONLY  0x182C TO 0xFEFF;
  ROM2   = READ_ONLY  0x1080 TO 0x17FF;
END

PLACEMENT /* here all predefined and user segments are placed into the SECTIONS defined above. */
  DEFAULT_ROM                   INTO ROM/*, ROM2*/; /* in case you want to use ROM2 here as well, add option -OnB=b to the compiler. */
  DEFAULT_RAM                   INTO RAM;
  _DATA_ZEROPAGE, MY_ZEROPAGE   INTO Z_RAM;
  DOT4MAC_NVRAM					  INTO NVRAM;
END

STACKSIZE 0x500

VECTOR 0 _Startup /* reset vector: this is the default entry point for a C/C++ application. */
//VECTOR 0 Entry  /* reset vector: this is the default entry point for a Assembly application. */
//INIT Entry      /* for assembly applications: that this is as well the initialisation entry point */